Kegs & Kegging - Page 2

Manufacturer: Taprite Brand: Taprite Model: T752HPG Color: Brass Red Black

The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators

Manufacturer: 2 Monkey Trading, LLC. Brand: Lucky Shot Model: 50BTH Color: Brass

All casings are 100% authentic, once-fired, military used 50 Cal BMG rounds, drilled to fit your tap with ease. What better way to serve your brews than with an American-made, and American sold bullet tap handle! Each bullet is hand polish, anti-tarnish lacquer coated and fits all US faucet lever threads (3/8" 16 UNC - Unified Coarse Thread).

Manufacturer: Taprite Brand: Taprite Model: E-T742 Color: Brass

Robust design delivers performance and reliability. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap! Pull cap to adjust the pressure and push back to lock it in. High CO2 volumetric flow provides continuity in product dispensing. This primary regulator connects directly to its gas source so it's ready to rock! Recommended operating pressure should be limited to 2/3 of the gauge range for maximum accuracy. UL approved per UL252 class IV rating for CO2. Polycarbonate bonnet will not chip, break or fade. 10 Micron filter built in to keep contaminants out of regulator.Taprite regulators are used throughout the beverage industry. This regulator is the most consistently accurate and well built regulator on the market. This unit stays on pressure even when your CO2 tank level does down. Approved for use by all major beer distributors and breweries. Shutoff valve is a ball type check valve that prevents product back-flow into the regulator and tank. Solid brass with extra long nipple. Regulator has pressure safety system (burst at 55 to 60 PSI). Permanent quad ring seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed. Regulator will be double boxed to avoid any damage in transit.

Manufacturer: Kegco Brand: Kegco Model: KC KT85D-L Color: Black

This is a commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American "D" system Sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.

Manufacturer: Chill Passion Inc. Brand: Draft Warehouse Model: CPCCM201X2 Color: Chrome

Standard Beer faucet with 4-1/8 inch shank and black plastic knob. Faucet and shank made of chrome plated brass

Manufacturer: KegWorks Brand: KegWorks Color: Green

No one should ever drink from dirty beer lines! * Improve the taste of your beer by eliminating foam-causing debris and beer stones before they have a chance to build up. For best results, you should clean your beer lines after every 1/2 barrel you and your kegerator kick. * This convenient pump assembly makes it easy to clean your draft system and the included cleaning solution easily powers through the potential grit and grime of your dirty lines. Detailed instructions are included, but for extra help and info check out the video below! Video: Learn How to Clean Your Draft Beer Lines * Click to download Cleaning Kit instructions * Please note: faucet brush you receive may vary slightly from one pictured. * Includes - (1) One quart plastic jar and pump assembly, (1) Faucet wrench, (1) Faucet brush, (1) KegWorks Brand Beer Line Cleaning Solution -32oz., and Detailed instructions.

Manufacturer: Kegco Brand: Kegco Model: KC D4743DT-SS Color: Stainless Steel

This is a Polished Stainless Steel Single Column, Double Faucet, 3" Diameter Draft Tower. This tower comes complete with two chrome-plated beer faucets and two separate 5" lengths of 3/16" clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.

Manufacturer: Chill Passion Inc. Brand: Draft Warehouse Model: DWCM201 Color: Chrome

Standard Beer faucet with 4-1/8 inch shank and black plastic knob. Faucet and shank made of chrome plated brass

Manufacturer: Cross Path Goods Brand: Perfect Pour Model: TH12 Color: Brown

Always changing kegs and unsure of what is on tap? Fear no more! Fully functioning chalkboard combined with elegant beech wood handle. All you need is a simple piece of chalk. Saves time and money. Allows you to use the same tap handle for every keg. Fits all US faucet lever threads. Chalk not included. Specs: Overall Height: 7.5". Square Face: 3.25". Square Face Thickness: 1.125". Threads: 3/8"-16 UNC (Unified Coarse Thread).Color may vary slightly from tap to tap

Manufacturer: Home Brew Stuff Brand: Foxx Model: 4048 Color: Stainless Steel

Make it easy to switch between commercial kegs and homebrew product tanks with this Sankey to Ball-Lock disconnect conversion kit. This kit features a ball-lock post for both the gas and liquid sides of a Sankey coupler. Each post threads onto the standard US 7/8" x 14 female straight pipe thread draft fittings of your coupler. All you'll need to do is attach ball-lock disconnects to your beer and air lines and then screw these conversion plugs onto your coupler. Once that's done, you'll be able to quickly and efficiently change out your kegs to enjoy both mass-produced commercial beer and your own homebrew creations. In stock and ready to ship. Features: Ball-lock posts easily attach to Sankey coupler air and beer line fittings. Makes it easy to toggle between commercial and homebrew beers. Includes both gas and liquid side ball-lock posts.