Robust design delivers performance and reliability. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap! Pull cap to adjust the pressure and push back to lock it in. High CO2 volumetric flow provides continuity in product dispensing. This primary regulator connects directly to its gas source so it's ready to rock! Recommended operating pressure should be limited to 2/3 of the gauge range for maximum accuracy. UL approved per UL252 class IV rating for CO2. Polycarbonate bonnet will not chip, break or fade. 10 Micron filter built in to keep contaminants out of regulator.Taprite regulators are used throughout the beverage industry. This regulator is the most consistently accurate and well built regulator on the market. This unit stays on pressure even when your CO2 tank level does down. Approved for use by all major beer distributors and breweries. Shutoff valve is a ball type check valve that prevents product back-flow into the regulator and tank. Solid brass with extra long nipple. Regulator has pressure safety system (burst at 55 to 60 PSI). Permanent quad ring seal on inlet nipple helps eliminate a source of leaks... no need to use a new fiber washer each time tank is changed. Regulator will be double boxed to avoid any damage in transit.
Dual pressure gauges - CO2 tank and keg pressure
Integrated 5/16 barb outlet with check valve to prevent backflow
0-50 PSI range, 60 lb & 2000 lb gauges
Duck-bill shutoff, check valve, and a red easy adjustment cap
Product Information Specifications for 1 X co2 Dual Gauge Regulator High Performance Below:
Kegco KC KT85D-L Beer Keg Coupler D System Tap Lever Handle, Black
Model: KC KT85D-L
This is a commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American "D" system Sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.
No one should ever drink from dirty beer lines! * Improve the taste of your beer by eliminating foam-causing debris and beer stones before they have a chance to build up. For best results, you should clean your beer lines after every 1/2 barrel you and your kegerator kick. * This convenient pump assembly makes it easy to clean your draft system and the included cleaning solution easily powers through the potential grit and grime of your dirty lines. Detailed instructions are included, but for extra help and info check out the video below! Video: Learn How to Clean Your Draft Beer Lines * Click to download Cleaning Kit instructions * Please note: faucet brush you receive may vary slightly from one pictured. * Includes - (1) One quart plastic jar and pump assembly, (1) Faucet wrench, (1) Faucet brush, (1) KegWorks Brand Beer Line Cleaning Solution -32oz., and Detailed instructions.
This is a Polished Stainless Steel Single Column, Double Faucet, 3" Diameter Draft Tower. This tower comes complete with two chrome-plated beer faucets and two separate 5" lengths of 3/16" clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.
Perfect Pour Chalkboard Beer Tap Handle Display Made of Wood for Kegerator
Manufacturer: Cross Path Goods
Brand: Perfect Pour
Always changing kegs and unsure of what is on tap? Fear no more! Fully functioning chalkboard combined with elegant beech wood handle. All you need is a simple piece of chalk. Saves time and money. Allows you to use the same tap handle for every keg. Fits all US faucet lever threads. Chalk not included. Specs: Overall Height: 7.5". Square Face: 3.25". Square Face Thickness: 1.125". Threads: 3/8"-16 UNC (Unified Coarse Thread).Color may vary slightly from tap to tap
Make it easy to switch between commercial kegs and homebrew product tanks with this Sankey to Ball-Lock disconnect conversion kit. This kit features a ball-lock post for both the gas and liquid sides of a Sankey coupler. Each post threads onto the standard US 7/8" x 14 female straight pipe thread draft fittings of your coupler. All you'll need to do is attach ball-lock disconnects to your beer and air lines and then screw these conversion plugs onto your coupler. Once that's done, you'll be able to quickly and efficiently change out your kegs to enjoy both mass-produced commercial beer and your own homebrew creations. In stock and ready to ship. Features: Ball-lock posts easily attach to Sankey coupler air and beer line fittings. Makes it easy to toggle between commercial and homebrew beers. Includes both gas and liquid side ball-lock posts.
Designed for use with the Krups BeerTender, BeerTender tubes connect the Heineken or Heineken Premium Light DraughtKeg to the BeerTender tap, Patented BeerTender tube is designed specifically for the Heineken and Heineken Premium Light DraughtKeg, Ensures a perfect fit between BeerTender DraughtKeg, To ensure that every glass of beer tastes as perfectly poured, a new BeerTender tube must be used with each new Heineken or Heineken Premium Light DraughtKeg you load into the BeerTender, Purchase unit has 12 ndividually wrapped BeerTender tubes
Heavy Duty Keg Beer Party Tap Chrome Body Pump - 8". This beer tap is durable, strong and built to last. Great for parties and other events requiring a keg tap. Will work on most USA domestic beer kegs like Budweiser, Miller, Coors, Molson, Busch, Sam Adams, etc. Lever coupler, Lever Handle. American Sankey (D System). 8" Chrome plated metal pump. Stainless steel coupler body & Nickel plated brass base. Also comes with tube and attached plastic faucet, please see picture.