Make it easy to switch between commercial kegs and homebrew product tanks with this Sankey to Ball-Lock disconnect conversion kit. This kit features a ball-lock post for both the gas and liquid sides of a Sankey coupler. Each post threads onto the standard US 7/8" x 14 female straight pipe thread draft fittings of your coupler. All you'll need to do is attach ball-lock disconnects to your beer and air lines and then screw these conversion plugs onto your coupler. Once that's done, you'll be able to quickly and efficiently change out your kegs to enjoy both mass-produced commercial beer and your own homebrew creations. In stock and ready to ship. Features: Ball-lock posts easily attach to Sankey coupler air and beer line fittings. Makes it easy to toggle between commercial and homebrew beers. Includes both gas and liquid side ball-lock posts.
Ball-lock posts easily attach to Sankey coupler air and beer line fittings
Makes it easy to toggle between commercial and homebrew beers
Easy to install
Includes both gas and liquid side ball-lock posts
Fits standard US 7/8" x 14 female straight pipe thread draft fittings on US Sankey coupler
Product Information Specifications for Sankey to Ball Lock Quick Disconnect Conversion Kit Below:
Designed for use with the Krups BeerTender, BeerTender tubes connect the Heineken or Heineken Premium Light DraughtKeg to the BeerTender tap, Patented BeerTender tube is designed specifically for the Heineken and Heineken Premium Light DraughtKeg, Ensures a perfect fit between BeerTender DraughtKeg, To ensure that every glass of beer tastes as perfectly poured, a new BeerTender tube must be used with each new Heineken or Heineken Premium Light DraughtKeg you load into the BeerTender, Purchase unit has 12 ndividually wrapped BeerTender tubes
Heavy Duty Keg Beer Party Tap Chrome Body Pump - 8". This beer tap is durable, strong and built to last. Great for parties and other events requiring a keg tap. Will work on most USA domestic beer kegs like Budweiser, Miller, Coors, Molson, Busch, Sam Adams, etc. Lever coupler, Lever Handle. American Sankey (D System). 8" Chrome plated metal pump. Stainless steel coupler body & Nickel plated brass base. Also comes with tube and attached plastic faucet, please see picture.
Meet the industry standard. The quick and easy to use lever is made of brass and there's an attractive chrome finish to make sure your point of dispense always looks great. For maximum versatility this faucet screws onto most any shank or tower. Any tap marker (faucet handle) can be used, however the handle is not included.
Manufacturer: Jarden Consumer Solutions--New Sources of Growth
Serve cold, draught beer on tap from the comfort of home with the Draftmark tap system. view larger Choose from a variety of distinctly different beers. view larger With Draftmark, you choose the glassware, the portion, and the pour. view larger With Draftmark, your home's become the new hotspot for hanging out. Uses easy-to-load (1-gallon) 3.8-liter refills (offered separately) of your favorite beer brand. view larger Beer stays fresh for up to 30 days thanks to bottle-in-bottle technology. Draftmark Tap System Fill, Chill, Pour, Relax You've checked another productive day off your to-do list. Now it's time to relax and unwind. Insert your favorite beer brand into your Draftmark appliance, refrigerate until 36-38 degrees Fahrenheit, and then enjoy fresh draught beer right from your refrigerator. With this high-end Draftmark personal draught system, easily serve flavorful, cold, draught beer on tap in sophisticated style--all from the...
Kegco KC TC-321 Digital Thermostat Control Unit, Black
Model: KC TC-321
Convert any freezer into a kegerator or fermentation chamber with the Kegco TC-321 Digital Thermostat Power Control. This device overrides an appliances' thermostat, regulating the amount of energy getting to the appliance and allowing you precise control over the temperature settings and the amount of temperature fluctuation between cycles. The control has a set point range of -40 to 100 degrees Fahrenheit for a wide variety of uses and settings, including controlling the power to a freezer to prevent it from getting too cold, or controlling the power to a terrarium to prevent it form getting too hot and maintaining a stable environment. The TC-321 features pre-wired cords with a plug to install in your electrical socket and a receptacle to plug your appliance into for easy installation, and an LCD display that can show set temperature, real temperature and other control functions. This temperature controller has both heating and cooling modes with adjustable set point and differential as well as the ability...
CMB (CM Becker) Ball lock disconnects. Ball lock system with Gas In & Beer Out. Beer Out: 1/4" MFL fitting with 1/4" Flare Fitting to fit 3/16" ID Beer Line. Gas In 1/4" MFL filling with 5/16" Flare Fitting to fit 5/16" ID Air Line. The 1/4" MFL fittings allow you to easily remove your gas/beer lines from the coupler connector
Manufacturer: Brew Tapper
Brand: Brew Tapper
Everywhere Our Customers are Raving about these Draft Beer Faucet Cap & Brush This is the Best Draft Beer Faucet Cap & Brush Here's How it works:- Insert into draft faucet.- Leave in faucet.- Remove and clean A must have! You cannot beat the taste of clean and fresh beer. - This faucet cap keeps your tap clean, for better tasting beer! It's easy to use and it'll make a huge difference in the quality of your draft beer. - Not only does the durable brush keep bugs and fruit flies away from your system, it prevents sediment and yeast from building up on the inside of your faucet. - Have a multi-tap system? The cap is designed with an opening up top, so you can chain several of them together for convenience. To Use: Before insertion, rinse the plug with warm water and shake dry. Insert the brush end first into the faucet opening until the plastic plug firmly seals the opening. Leave in place overnight. When removing, twist the plug to gently scrub the inside of the faucet. To clean: Rinse with running water to ...
This surface mount kegerator drip tray is designed to fit around the base flange of a 3" diameter draft tower. Made of stainless steel with a brushed finish, these high quality beer drip trays are outfitted with a removable cover for easy cleaning. These trays are set on top of the bar under your faucet, not built into the bar. This particular tray does not have a drain hole so the tray is emptied out manually. Features - Made of stainless steel with brushed finish, designed with a cutout for 3" tower base flange, stainless steel cover is easily removable for cleaning. Specifications: dimensions: 12" L x 7" W x 3/4" H. Cutout dimensions: 5" x 1.75". Includes: Stainless steel cover.