Thermometers - Page 316

Manufacturer: Thomas Scientific Brand: Thomas Model: 4521

Triple display constantly shows minimum/maximum, and current temperatures. Instantly view if freezer, water bath, or incubator is within temperature spec. Monitor temperature of any experiment when you’re not there-overnight, weekends. Range is -50 to 70 degree C. Resolution is 1 degree and accuracy is +/-1 degree C. Sensor and 10-foot cable may be placed under water, in refrigerator, or freezer. Small cable diameter (1/16") allows refrigerator doors to close on it with no effect. Unplugging the cable activates a sensor inside the unit for monitoring ambient room temperature. Simple, one-button operation resets the minimum/maximum memories. Probe’s wire-mounting bracket permits easy sensor placement. Low battery is signaled on the display. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Unit’s high-impact ABS plastic case has a flip-open stand, wall hanging hook, magnet and Velcro mounting tape. Measures 2.5" width by 2-5/8" height by 0.75" thick and weight is 1-7/8 ounces. Unit runs continuously for 1 year on the supplied battery.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4522

Triple display constantly shows minimum/maximum, and current temperatures. Instantly view if freezer, water bath, or incubator is within temperature spec. Monitor temperature of any experiment when you’re not there-overnight, weekends. Range is -58 to 158 degree C. Resolution is 1 degree and accuracy is +/-1 degree C. Sensor and 10-foot cable may be placed under water, in refrigerator, or freezer. Small cable diameter (1/16") allows refrigerator doors to close on it with no effect. Unplugging the cable activates a sensor inside the unit for monitoring ambient room temperature. Simple, one-button operation resets the minimum/maximum memories. Probe’s wire-mounting bracket permits easy sensor placement. Low battery is signaled on the display. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Unit’s high-impact ABS plastic case has a flip-open stand, wall hanging hook, magnet and Velcro mounting tape. Measures 2.5" width by 2-5/8" height by 0.75" thick and weight is 1-7/8 ounces. Unit runs continuously for 1 year on the supplied battery.

Manufacturer: Winters Brand: Winters Instruments Model: TBM32025B8

A general purpose, versatile stainless steel 304 thermometer. Bi-metallic sensing element for reliable readings. Adjustable angle connection. Anti-parallax dial that reduces operator reading errors. 5 Year warranty. Welded stem. Application: industrial process, heating and air conditioning, ventilation and wastewater. Dial 3" aluminum with black markings, dish-shaped. Case: stainless steel 304 AISI. Recalibrator: standard. Ring: stainless steel 304 AISI. Sensing element: bi-metallic coil. Pointer: aluminum, painted black. Maximum operating pressure: 125 psi (861 kPa). Operating temperature: 75 percent of full scale value (recommended maximum). Ambient temperature: -58/248 degree fahrenheit. +/- 1 Percent accuracy. Enclosure rating IP68. Lens: Glass standard, hermetically sealed. Re-zero adjustment screws are standard on the 3" dial. Connection: 1/2" NPT standard. Temperature ranges: 0 degree F to 250 degree F and -20 degree C to 120 degree C. RoHS Compliant.

Manufacturer: ETA hand2mind Brand: ETA hand2mind Model: 75016

These Celsius thermometers have a plastic backing with a recessed glass tube. Tube liquid filling is mercury free. The high range thermometers show only Celsius temperatures ranging from -30° to 120° in 1-degree increments. The thermometers are 7" long and about 1" wide and come as a pack of 10. Science education products incorporate applied math and science principles into classroom and homeschool-based projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.

Manufacturer: Testo AG Brand: Testo Model: 0560 9055 Color: Multicolored

The Testo 0560 9055 Pocket Line penetration digital thermometer is a dual-range Type K thermocouple thermometer for use in monitoring short temperature measurements of electrical, mechanical, and HVAC equipment. It measures temperature from -50 to +350 degrees C (-58 to +660 degrees F), and short-term up to 500 degrees C (930 degrees F), with an accuracy of + or - 1 degree C (1.8 degrees F) from -50 to +99.9 degrees C (-58 to +212 degrees F) and + or - 1% of the reading outside this range. This thermometer has a 7.9" stem with a Type K thermocouple sensor in the tip for taking accurate measurements. The head swivels in all directions for visibility when reading temperatures at any angle. The unit operates on three AAA batteries and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with batteries, a belt clip, and instructions.SpecificationsTemperature range-50 to +350 degrees C (-58 to +660 degrees F) and short-term up to 500 degrees C (930 degrees F)Display resolution0.1 degree F (0.1 degree C)Accuracy+ or - 1 degree C (1.8 degrees F) from -50 to +99.9 degrees C (-58 to +212 degrees F) and + or - 1% of the reading outside this rangeResponse time10 secondsStandards metCE markPower supply(3) AAA batteriesWeight2.8oz.Dimensions10 x 1.5 x 1.4 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-503

The Dwyer A-503 bi-metal dial thermometer measures temperature from 200 to 1000 degrees F (100 to 540 degrees C). Its 4.5" stainless-steel stem-style probe is attached to the back of the dial case. The dial face measures 2" in diameter.Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. The company, founded in 1931, is headquartered in Michigan City, IN.

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: ACC550DIG

THERMCO Thermometer, Digital, -50 to 300°C and -58 to 572°F Range, 0.1°C Resolution, ±1°C Accuracy, with Probe, 4.5 x 2.5 x 0.5 in Pocket Size, Minimum/Maximum Memory, High/Low Alarm, Data Hold/Test Function, °C/°F Switchable, Attached Bench Stand, NIST Compliant, Certificate Included -TRMC

Manufacturer: CONTROL COMPANY Brand: CONTROL COMPANY Model: 6425

Additional Bottle Remote Module, for refrigerator/freezer applications - 6425 - EACH

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: TRH158-0-8

Measure both temperature and humidity with the TRH158. It is wall or desk mountable and is F/C selectable.

Manufacturer: Bel-Art Products Brand: SP Scienceware Model: B61315-0000

This 69mm (2 ¾") long, durable bi-metal thermometer measures temperature in the range of -20/150°C (0/300°F) with a dial size of 81mm (3 ³⁄₁₆"). It has a red maximum registering pointer that is moved up by the black temperature measuring pointer to indicate the highest temperature achieved, and remains there until manually reset. Threaded 1/4" NPT connection screws directly into in-line processes, or can be used to mount thermometer on included stand. Constructed from durable 304 stainless steel with a glass lens, this waterproof, mercury free thermometer withstands pressure, autoclave cycles, high temperatures and rust. It has a removable protective silicone sleeve to prevent moisture from making contact with the dial. Includes multi-language (English, French, German, Italian, Portuguese and Spanish) instructions and Statement of Test and Calibration traceable to NIST. Also available with individual calibration report (calibration point 121°C), traceable to NIST.