Thermometers - Page 261

Manufacturer: Troemner Brand: Talboys

Holds glass tubes and thermometers 114mm (4.49") from support rod. Clamp features safety adjust spring plate jaws that adjust to any angle with locking wing nut. Built-in holder grips rods up to 19mm (0.75") in diameter. Lightweight, rust, and corrosion-resistant. Nickel-plated construction.

Manufacturer: Extech Brand: Extech Model: 42529

FEATURES Two models with choice of range and resolution Model EH42530: Wide range temperature measurements from 58 to 1000 °F, 0.1 ° resolution Model EH42529 : Basic model measures temperature from 0 to 600 °F, 1 ° resolution Built-in laser pointer identifies target area Backlighting Audible and visible overrange indicators Automatic Data Hold when trigger released Fixed 0.95 Emissivity covers 90% of surface applications Auto Power Off Complete with 9V battery

Manufacturer: Industrial Grade Brand: Industrial Grade

Panel Mount Thermometer, Remote Vapor Tension, Analog Display, Temp. Range -40 to 60 F, Temp. Range -40 to 15 C, Front Flange Mounting, Dial Size 2 In, Accuracy +/-2%, Line Length 48 In, Line Length 4 Ft, Sensor Dimension 2.2 X 0.312 In, Case Material Stainless Steel, Tube Material Nickel/Tin Plated, Lens Material Polycarbonate, NSF Certified

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-39642-00

The Oakton WD-39642-00 Mini TempTestr IR infrared thermometer measures surface temperature from a safe distance for use in food preparation, field measurements, and mechanical maintenance and troubleshooting. The thermometer measures temperature from - 33 to 220 degrees C (- 27 to 428 degrees), with an accuracy of + or - 2% of the measurement or 2 degrees C/4 degrees F, whichever is higher. The thermometer has a 1:1 distance-to-spot measurement ratio. A 95% accurate measurement is available in less than 1 second, allowing rapid measurement of moving parts. The unit's memory stores minimum/maximum measurements and the unit has a hold function and selectable auto-off. The Oakton WD-39642-00 is used to measure the temperature of hot and cold food products, electrical connections, engine parts, and other surfaces.SpecificationsTemperature range-33 to 220 degrees C (-27 to 428 degrees F)Accuracy+ or - 2% or 2 degrees C/4 degrees FResolution1 degree C/1 degree FDistance-to-spot ratio1:1Power supply(1) 3V CR2032 battery (included)Dimensions (H x W x D)2.5 x 1.5 x 0.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industrial equipment.Oakton Instruments manufactures scientific instruments for research, industrial, and educational uses. The company, founded in 1991 and headquartered in Vernon Hills, IL, specializes in meters, electro...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 30025D206G4

WIKA bimetal thermometers are ideal for most rugged industrial temperature measurement applications. The hermetically- sealed case offers protection from weather and dust, and is guaranteed against fogging up. WIKA Type TI.30 thermometers are guaranteed for 7 years. Ranges: -100 degree F to 1000 degree F (and equivalent Celsius). Working range - steady: full scale value and short time: 110 percent of full scale value. Over range: temporary over or under range tolerance of 50 percent of scale up to 500 degree F. (260 degree C). For ranges above 500 degree F, maximum over range is 800 degree F, continous. 1000 degree F intermittent. Connection: Material 304 stainless steel, Center back mount (CBM), 1/2" NPT. Measuring element: bi-metal helix. Pointer: black aluminum. Stem: 304 stainless steel material, stem measures 1/4" diameter by 2-1/2" length, TIG welded at tip and case connection. Case: 304 stainless steel Material, hermetically sealed per ASME B40.3 standard Ingress protection IP 65 external reset slotted hex head on back of case. Dial: anti-parallax, heavy gauge aluminum with white matte finish. Dampening: inert gel to minimize pointer oscillation. Standard scales: single: fahrenheit or celsius, dual: fahrenheit (outer) and celsius (inner). Window gasket: neoprene silicone (-100 degree F and over 550 degree F). Window: flat instrument fully gasketed glass. Movement: viscous inert gel to enhance pointer operation. Hermetic Seal: Per ASME B40.3, IP65, NEMA 4X.

Manufacturer: Thomas Scientific Brand: Thomas

Each thermometer includes a statement of accuracy indicating accuracy traceable to NIST. Each item is tested and calibrated in an exclusive triple accredited/registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST. Thermometers are also traceable to DKD/PTB and include a multi-language (English, French, German, Italian, Portuguese and Spanish) statement of accuracy. Ideal for field studies, waste water treatment and any "on-the-go" applications. Accurate and safe. Thermometers measure 160mm long and feature of pocket case: Closed metal case. Made in the USA. 2 degree F Division. 0 - 220 degree F Temperature range.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 1051-03-1 Color: Blue

The Glass Stick thermometer features a large bore tempered-glass tube which is filled with a non-toxic liquid. It includes a plastic case with clip.

Manufacturer: Test Products International, Inc Brand: TPI Model: 315C

The TPI 315C auto field-calibrated, water resistant, stem-style digital thermometer with penetration tip is for monitoring temperature in food service, electrical testing, and heating, ventilation, and air conditioning applications. It measures temperature from -50 to 150 degrees C (-58 to 300 degrees F) with an accuracy of + or - 1 degree C (2 degrees F). The thermometer can be calibrated in an ice bath to preserve the accuracy of readings. The LCD screen shows the current temperature. The operator can choose to display readings in degrees Fahrenheit or Celsius. The stem-style probe is 2.8" long and has a penetration tip for taking measurements while immersed in liquid or air. The tapered stem measures 0.115" (2.9 mm) in diameter and can fit into a Pete's plug. A hold function keeps a reading on display so it can be recorded. The body is made from reinforced plastic, which resists impact and wear. It has an ingress protection rating of IP67, meaning it is protected against dust and the effects of immersion up to 39" (1 m). It can withstand drops of up to 10 feet. A magnetic clip slides onto the body of the thermometer to provide hands free use for applications such as duct repair. The thermometer runs on one LR44 button battery (included). The thermometer automatically turns off after a period of non-use to conserve battery life, and a low battery indicator signals when the battery needs to be replaced.SpecificationsTemperature measurement range-50 to 150 degrees C (-58 to 300 degrees F)Accuracy+ or - 1 degree C (2 degrees F)Resolution0.1 degree C or FSample rate1.5 secondsStem length71 mm/2.8 in.Tip diameter at sensor2.9 mm/0.115 in.Ingress protection ratingIP67Power supplyLR44 battery (one, included) Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricit...

Manufacturer: Bel-Art Brand: Enviro-Safe

Enviro-Safe thermometer provides the same accuracy as mercury thermometer without the hazards! Market-leading Enviro-Safe liquid is a unique mixture of biodegradable citrus oil, a hydrocarbon, and green dye. It is 100 percent non-toxic, non-hazardous, and biodegradable. Each unit comes with individual serial numbers and a statement of accuracy indicating accuracy traceable to NIST standards. Fused markings. White-backed, lead-free glass. Total immersion available. Available in 305-millimeters length. Temperature range: -20 degrees to 110 degrees C.

Manufacturer: Ryobi Brand: Ryobi Model: IR002 Color: Green

Factory Warranties will only be honored if this product is purchased through an Authorized Seller. Ask the seller if they are authorized before purchasing. Ryobi introduces the Ryobi IR Thermometer. To start saving on energy costs, use this Ryobi Non-Contact Infrared Thermometer to detect hot and cold spots near doors and windows and check air vents for efficiency. The thermometer's laser guide makes it easy to take temperature readings by clearly identifying the current target. The small hand-held size of the thermometer allows for great portability between jobs, so you can check the energy efficiency of your household and then easily transition to checking the temperatures of engine components. Hand-held size for portability from project to project Batteries are included