Thermometers - Page 141

Manufacturer: Raytek Brand: Raytek

Manufacturer: VWR Brand: VWR

Precision-grade for accurate work. In compliance with accuracy requirements of ANSI/SAMA Z236.1-1983. Each instrument is individually calibrated against equipment whose calibration is traceable to the National Institute of Standards and Technology and Deutscher Kalibrierdienst. Meet ISO 9001:2000 and Guide 17025 criteria. All thermometers are spirit-filled, with white back glass and permanently fused markings.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 800043

Infrared, RTD and thermocouple capabilities in a single unit. This unique thermometer combines Infrared, RTD and thermocouple capabilities in a single unit. With Ultimate Thermometer you’re certain to have a solution for every temperature measurement application you encounter. For general purpose applications use any standard type K, J, R, E, or T thermocouple probe. Need a very precise temperature reading? Use the PT100 RTD probe included. Want to measure the temperature inside a furnace? Just point the built-in IR thermometer which features a laser guide and adjustable emissivity. Other sophisticated features include RS232 computer interface, C & F selection, min/max memory, relative temperature, auto power off, and hold. Has a tripod back and an easy to read back lit display with large ½” high digits. Come in a hard carrying case and a 9V battery. N.I.S.T. traceable certificate of compliance available.

Manufacturer: China Brand: MASTECH -60¡ãC~500¡ãC Handheld Non-Contact Dig Model: MASTECH -60¡ãC~500¡ãC Handheld

MASTECH -60C~500C Handheld Non-Contact Digital IR Infrared Thermometer

Manufacturer: Reed Brand: Reed Instruments Model: C-370

The Reed C-370 RTD digital thermometer with platinum resistor puncture probe is for use in applications requiring precise and stable temperature measurements. It measures temperature -100 to 500 degrees C (-148 to 572 degrees F) with an accuracy of + or - 0.1% of the reading plus 0.4 degrees C (0.8 degrees F). The platinum resistor sensor provides more accurate and stable readings than a thermistor sensor but has a narrower temperature measurement range and slower response time. The LCD screen shows the current temperature, the highest or lowest temperature reading for the session, the average reading for the session, or the difference between two readings. The operator can choose to display readings in degrees Fahrenheit or Celsius. The backlit display is readable in low light. The hold function keeps a measurement on the display so it can be recorded. A platinum resistor puncture probe is included. The thermometer operates on three AAA batteries (included). A low-battery indicator alerts the operator when the batteries need to be changed, and the thermometer automatically turns off after a period of non-use to conserve battery life. A waterproof casing helps protect against damage from splashes and spills.SpecificationsTemperature measurement range-100 to 500 degrees C (-148 to 572 degrees F)Resolution0.1 degree C or FAccuracy+ or - 0.1% of the reading plus 0.4 degrees C (0.8 degrees F)Temperature co-efficient0.01% of reading plus 0.03 degrees C at less than 18 degrees C or greater than 28 degrees CPower supplyAAA batteries (three, included)Weight175 g (6.17 oz.)Dimensions*150 x 66 x 31 mm/5.9 x 2.6 x 1.22 in. (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermisto...

Manufacturer: Taylor Brand: taylor

Dial Pocket Thermometer, Temp. Range (F) -40 to 160 Degrees FStem Length 5 In., Accuracy +/-2 Percent at Scale Ends, Standards NSF CertifiedDegree Divisions 2 Degrees Dial Size 1 In., Lens Material PolycarbonateStem Material 304 Stainless Steel, Case Material 304 Stainless Steel, Features Single Point Calibration, Glow in the Dark DialIncludes Pocket Clip/Sheath RestrictionsCalifornia Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Pocket Analog ThermometersCalibration nut and storage sleeve included.Accuracy: 2% Stainless steel construction NSF Certified

Manufacturer: Winters Brand: Winters Instruments Model: TSW174-SW

An economical and accurate way to measure air or water temperatures. Separable thermowell. Dual scale. 1/2" NPT process connection. 5 Year warranty. Dial type. Applications: hot water lines, boilers and hydronic heating. Dial: 2-1/2" aluminum dial, painted white with black and red markings. Case: aluminum. Lens: glass. Ring: steel, chrome plated. Thermowell: brass (HPB59-1), 3/4" NPT standard, separable, Sweatwell. Stem: brass. Sensing element: bi-metallic element. Pointer: aluminum, painted black. Recalibrator: standard. Accuracy: +/-1 percent. Temperature range: 30 to 250 degree F and 0 to 120 degree C.

Manufacturer: Thermco Brand: THERMCO

ASTM Saybolt Viscosity S18F non- mercury thermometer, blue spirit filled ASTM Saybolt Viscosity S18F non- mercury thermometer, blue spirit filled, immersion total, length 280mm, Range : +94 to 108degree F, Divisions: 0.2degree F. This listing is for Each

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 1246-02C-2

The 1246-02C Bi-Metal Pocket Test features a red protective sheath with anti-microbial additive, adjustment tool and pocket clip. NSF certified.

Manufacturer: Thermco Brand: THERMCO

"ACCUSAFE" BIODEGRADEABLE BLUE-SPIRIT LABORATORY THERMOMETER - PARTIAL IMMERSION-1/51C x 0.2C