|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $38.06
Manufacturer: Cooper-Atkins Corporation
Brand: Cooper
Model: 14235
Manufacturer: Cooper-Atkins Corporation
Brand: Cooper
Model: 14235
Hard Carrying Case with Label and handle. Used for handheld instrumentation storage.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $24.49 13% OFF
Manufacturer: General Tools & Instruments
Brand: General Tools
Model: DT520TH
Manufacturer: General Tools & Instruments
Brand: General Tools
Model: DT520TH
The General Tools and Instruments DT520TH Digital T-Handle Lab Thermometer, 8 Inch Stainless Steel Probe, -58 To 536 Degrees is a T-Handle lab ready thermometer. Device has a Fahrenheit and Celsius toggle switch, on or off switch and data hold. The auto power-off ensures that your battery is preserved. Pocket clip keeps the thermometer in your shirt pocket or pants and always nearby. Powered by one LR44 battery which is included.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $202.96 1% OFF
Manufacturer: Thermo Scientific
Brand: Oakton
Model: WD-35427-00
Manufacturer: Thermo Scientific
Brand: Oakton
Model: WD-35427-00
The Oakton Temp 10 thermocouple thermometer is available in 3 different models; J, K or T input. The Temp 10 thermometers use standard miniconnectors, which allow for the use of a wide variety of probes. Push-button operation and ergonomic design provide for fast, easy, one-handed operation. Temperature units can be displayed in °C or °F. The Oakton Temp 10 thermocouple thermometer displays the minimum and maximum temperature since the meter was last switched on. The Min / Max Hold Mode can be used to continuously update lowest and highest temperature readings. The temperature offset calibration adjustment is a push button adjustment for fine-tuning factory calibration. The Oakton Temp 10 thermocouple thermometer has a hold function which freezes measurements for convenient reading and recording. The auto-off function turns the meter off after 17 minutes of non-use to save the batteries. The sealed keypad and ABS plastic case meet IP54 standards for splash resistance. The optional rubber armor adds protection and features a built-in stand. Temperature Range: -346 to 2192°F (-210 to 1200°C) Temperature Resolution: 0.1° between -199.9° and 999.9°; 1° below -199.9° and above 999.9° Temperature Accuracy: Below -238°F (-150°C): +/- 0.25% of reading +/- 2°F (1°C). Above -235°F (-150°C): +/- 0.1% of reading +/- 0.7°F (0.4°C). Temp 10 thermometers features include a large easy-to-read illuminated 4 digit display, an easy-to-use five-button control panel, Min/Max, Hold, °F / °C switchable, auto shutoff, and low battery indicator. Probes: accepts one (1) Thermocouple Probe type J with miniconnector (not included). Includes: AA batteries (3) and instructions. Oakton #: WD-35427-00
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $24.80 3% OFF
Manufacturer: Taylor Precision Products
Brand: Taylor
Manufacturer: Taylor Precision Products
Brand: Taylor
9847N Features: -Five Star Commercial collection. -Includes 1 - LR44 button cell battery. -Pen style with LCD readout. -On/Off switch and hold button. -One second updates. -Anti-microbial pocket sleeve with lanyard. Product Type: -Digital. Number of Items Included: -2. Food Type: -Meat. Instant Read: -Yes. Commercial Use: -Yes. Dimensions: Stem Length: -5". Overall Product Weight: -0.13 lbs.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $123.00
Manufacturer: Palmer Wahl Instrumentation Group
Brand: Wahl Instruments
Model: DHS125XEL
Manufacturer: Palmer Wahl Instrumentation Group
Brand: Wahl Instruments
Model: DHS125XEL
The Wahl DHS125XEL is a Hybrid handheld infrared thermometer designed for measuring temperatures via contact and non-contact methods, up to 1400°F (760°C). Select between Fahrenheit and Celsius scales. 12:1 Distance to spot ratio makes this unit best for short distances. Resolution is 0.1°F (0.1°C). Emissivity is adjustable from 0.1 to 1.00 - use an external Type K Thermocouple to measure your target, and the built-in software will calculate and automatically set the appropriate emissivity. Repeatability is ±2°F (±1°C). LCD Screen is backlit for viewing in low light conditions. Automatic power off after 6 seconds preserves power to extend battery life. Class II aiming laser is user selectable. Comes with User Manual, 1 - 9V Alkaline Battery, and Carrying Case. Dimensions: 7.09" x 5.12" x 1.57" (180mm x 130mm x 40mm). Weight with battery is 6.7oz (195 grams).
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $36.11
Manufacturer: Thomas Scientific
Brand: Thomas Scientific
Model: 4142
Manufacturer: Thomas Scientific
Brand: Thomas Scientific
Model: 4142
Large, 1-1/8-inch-high digits can be viewed from across the lab. Unique Four-Alert Thermometer provides user with precise monitoring of the slightest change in temperature. Temperature range is -58.0 to 158.0 degree F or -50.0 to 70.0 degree C, resolution is 0.1 degree, and accuracy is +/-1 degree C. Front panel controls are easy to set. Unit displays both probe and ambient temperature. Alarm will activate at a temperature above a setting, below a setting, between two settings, or outside two settings. Green/red lights blink and an alarm sounds when an out-of-range condition is detected. Continuous alarm sounds every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off. To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with self-adhesive wall mount and a flip-open lab bench stand. Sensor dimensions are 0.2-inch diameter by 2/3-inch length. Supplied with an accessory place-anywhere sensor-holding suction cup. Cable length is 3-1/2 feet. ABS plastic shock-resistant and chemical-resistant case is 4" length by 4" width by 5/8" thick. Weight is 4-1/4 ounces.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $29.95 19% OFF
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4143
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4143
Large, 1-1/8" high digits can be viewed from across the lab. Unique four-alert thermometer provides user with precise monitoring of the slightest change in temperature. Temperature range is -58 to 158 degree F. Resolution is 0.1 degree and accuracy is +/-1 1degree C. Front panel controls are easy to set. Unit displays both probe and ambient temperature. Alarm will activate at a temperature above a setting, below a setting, between two settings, or outside two settings. Green/red lights blink and an alarm sounds when an out-of-range condition is detected. Continuous alarm sounds every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with self-adhesive wall mount and a flip-open lab bench stand. Sensor dimensions are 3/16" diameter by 2/3" length. Supplied with an accessory place-anywhere sensor-holding suction cup. Cable length is 3.5'. ABS plastic shock-resistant and chemical-resistant case. Measures 4" width by 4" height by 5/8" thick. Weight is 4.25 ounces.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $143.45
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4134
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4134
Recorder jack provides a millivolt signal output. This enables thermometer to be used with any chart recorder, strip recorder, or computer that accepts millivolt signals. Output results on demand: Monitor conditions in chambers, clean rooms, food processing, scientific labs, and all temperature-sensitive manufacturing operations. Recorder output provides a hard copy for today’s stringent QC documentation requirements. Output specifications are 1 mV output per degree in 0.1 degree display mode and 0.1 mV output per degree in the 1 degree display mode. Range is -50 to 1999 degree F and -50 to 1300 degree C, with a meter only accuracy of +/-0.3percent of the reading plus 1degree C. Resolution is 0.1 degree from -50 to 199.9 degree and is 1 degree for other readings. Stores highest readings reached: Maximum button captures the highest reading achieved. HOLD button freezes display to capture current reading. Uses all Type-K thermocouples. Large, bright, 1/2" high, four-digit LCD can be read from 10 feet away. Handheld unit is completely portable and designed for years of dependable and reliable service. Traceable to NIST for accuracy: To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Comes ready to use with fast-response, Type-K beaded probe with 4 foot cable length, 9-volt battery, recorder output jack, and Traceable Certificate. Size is 2-3/4" width by 5-1/4" height by 1-1/4" thick and weight is 5-1/2 ounces.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $149.75
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4003
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4003
The Thomas Traceable Waterproof Type K Thermometer is used in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. The thermometer measures temperature from -200 to 1300 degrees C (-328 to 2372 degrees F), with an accuracy of + or - 0.3 percent plus 1 degree C. The Type K thermocouple probe has a 4 ft. cable. The LCD display has 5/8"-high digits that are visible from up to 10 ft. and has a backlight for low-light situations. The thermometer has a hold feature to freeze the display and capture the current reading. The unit is waterproof and includes a "boot" that fits over the thermocouple to keep water from seeping in around the thermocouple attachment. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure temperature in industrial furnaces, kilns, and freezers.SpecificationsPower source(1) 9V batteryTemperature range-200 to 1300 degrees C (-328 to 2372 degrees F)Temperature accuracy (-50 to 1000 C)+ or - 0.3 percent plus 1 degree CTemperature accuracy (all other measurements)+ or - 0.5 percent plus 1 degree CTemperature resolution0.1 degreeStandard metInternational Organization for Standardization (ISO) 17025Weight8 oz.Dimensions (H x W x D)7 x 2.33 x 1.25 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $112.40
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4015
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4015
The Thomas Traceable Total-Range Thermometer is used in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. The thermometer measures temperature from -200 to 1370 degrees C (-328 to 2498 degrees F), with an accuracy of + or -0.2 degrees C. The Type-K thermocouple probe is attached to the base with a four-foot cable. The thermometer has a minimum/maximum temperature memory and a 24-hour countdown timer for long-term monitoring and a hold feature to freeze the display and capture the current reading. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure temperature in industrial furnaces, kilns, and freezers SpecificationsPower source(3) AAA batteryTemperature range0 to 50 degrees C (22 to 122 degrees F)Temperature accuracy (-50 to 1000 C)+ or - 2 degrees CTemperature resolution0.1 degree C (-50 to 1000 degrees C), 1 degree outside this rangeStandard metInternational Organization for Standardization (ISO) 17025Weight8oz.Dimensions (H x W x D)7 x 3.25 x 1.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end of each conductor, which can be used to determine the temperature. Different alloys are used for different temperature ranges. Thermocouple thermometers are used in applications that require a large temper...
|
|