|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $36.11
Manufacturer: Thomas Scientific
Brand: Thomas Scientific
Model: 4142
Manufacturer: Thomas Scientific
Brand: Thomas Scientific
Model: 4142
Large, 1-1/8-inch-high digits can be viewed from across the lab. Unique Four-Alert Thermometer provides user with precise monitoring of the slightest change in temperature. Temperature range is -58.0 to 158.0 degree F or -50.0 to 70.0 degree C, resolution is 0.1 degree, and accuracy is +/-1 degree C. Front panel controls are easy to set. Unit displays both probe and ambient temperature. Alarm will activate at a temperature above a setting, below a setting, between two settings, or outside two settings. Green/red lights blink and an alarm sounds when an out-of-range condition is detected. Continuous alarm sounds every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off. To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with self-adhesive wall mount and a flip-open lab bench stand. Sensor dimensions are 0.2-inch diameter by 2/3-inch length. Supplied with an accessory place-anywhere sensor-holding suction cup. Cable length is 3-1/2 feet. ABS plastic shock-resistant and chemical-resistant case is 4" length by 4" width by 5/8" thick. Weight is 4-1/4 ounces.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $53.78 7% OFF
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 8601
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 8601
The Thomas 8601 temperature alarm is used for monitoring the temperature in liquids, semisolids, and gases. The thermometer measures temperature from -50 to 70 degrees C (-58 to 158 degrees F), with an accuracy of + or -1 degree C. The thermometer reads temperature through either an internal or a submersible external probe with a 10-foot cable. The thermometer memory stores minimum/maximum values and has a temperature alarm that can be programmed to indicate audibly when the temperature exceeds a maximum or minimum value. The alarm continues to sound for up to 12 hours, even if the temperature returns to non-alarm range. The LCD display has 0.5" high digits for visibility from up to 10 ft. away. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. The Thomas 8601 is used in food storage, scientific laboratories, and other industries that require temperature monitoring.SpecificationsPower source(1) AA batteryTemperature range-50 to 70 degrees C (-58 to 158 degrees F)Accuracy+ or - 1 degree CResolution1.1 degree C/1.1 degree FStandard metInternational Organization for Standardization (ISO) 17025Cable length10 ft.Weight0.3lb.Dimensions (H x W x D)4.25 x 2.75 x 0.75 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermo...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $50.55 4% OFF
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4378
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4378
New heads-up Lollipop Traceable waterproof/shockproof thermometer replaces hazardous mercury units. Stainless-steel probe is resistant to most laboratory chemicals. Wide range covers 99 percent of the lab’s routine temperature measurements: -58 to 572 degree F. Resolution is 0.1 degree from -20 to 200 degree; 1 degree outside this range. Ultra model accuracy is +/-0.4 degree C at tested points. Reading updates every second. At the touch of a button, memory recalls highest and lowest temperature readings over any time period. Reading is updated every second. Solid-state construction eliminates dangers inherent in breakable glass and toxic mercury thermometers. Operates without fail in any lab condition-outdoors too. Waterproof construction is ideal for wet labs, wash-down areas, and virtually all field applications. Engineered to be shockproof in drop tests up to 5 feet. Bright 1/4" high display is easy to view. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied complete with stainless-steel probe, probe cover, and silver-oxide battery (runs continuously for one year). Stem measures 1/8" diameter by 8" length. Unit measures 10.25" length by 1.75" width by 1/2" depth. Weight is 7/8 ounce.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $29.95 19% OFF
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4143
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4143
Large, 1-1/8" high digits can be viewed from across the lab. Unique four-alert thermometer provides user with precise monitoring of the slightest change in temperature. Temperature range is -58 to 158 degree F. Resolution is 0.1 degree and accuracy is +/-1 1degree C. Front panel controls are easy to set. Unit displays both probe and ambient temperature. Alarm will activate at a temperature above a setting, below a setting, between two settings, or outside two settings. Green/red lights blink and an alarm sounds when an out-of-range condition is detected. Continuous alarm sounds every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with self-adhesive wall mount and a flip-open lab bench stand. Sensor dimensions are 3/16" diameter by 2/3" length. Supplied with an accessory place-anywhere sensor-holding suction cup. Cable length is 3.5'. ABS plastic shock-resistant and chemical-resistant case. Measures 4" width by 4" height by 5/8" thick. Weight is 4.25 ounces.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $60.32
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4349
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4349
The Thomas Traceable Ultra Robo Thermometer measures temperature in reagents, water baths, foods, air, and semisolids. The thermometer measures temperature from -50 to 280 degrees C (-58 to 536 degrees F), with an accuracy of + or - 0.4 degrees C. Its 8" stainless-steel stem is long enough to take measurements in deep laboratory vessels and is resistant to most laboratory chemicals. The LCD display has 1/4" high digits and rotates 180 degrees for viewing at any angle. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to monitor temperature in liquids and semisolids in laboratories and industrial settings.SpecificationsTemperature range-50 to 280 degrees C (-58 to 536 degrees F)Temperature accuracy+ or - 0.4 degree CTemperature resolution0.1 degree C (-20 to 200 degrees C)Standard metInternational Organization for Standardization (ISO) 17025Stem length8"Overall length9.25"Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Thomas Scientific manufactures lab supplies, equipment, chemicals, and instruments for scientific research. It is a registered contractor for the United States Federal Government. The company was founded in 1899 and is headquartered in Philadelphia, PA.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $51.76
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4252
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4252
The Thomas Traceable Ultra Full-Scale Thermometer measures temperature in water baths, incubators, freezers, and other laboratory equipment. The thermometer measures temperature from -50 to 250 degrees C (-58 to 500 degrees F), with an accuracy of + or - 0.5 degrees C between -20 and 100 degrees C. Its 5.75" stainless-steel probe is resistant to most laboratory chemicals. The probe is attached to the base by a 10-foot cable. The LCD display has 3/8" high digits. The base has a magnetic back for mounting on a metal surface, a flip-open stand, and a spring fastener for clipping on any edge. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to monitor temperature in liquids and semisolids in laboratories and industrial settings.SpecificationsPower source(1) 1.5V silver-oxide batteryTemperature range-50 to 250 degrees C (-58 to 500 degrees F)Temperature accuracy+ or - 0.5 degree C between -20 and 100 degrees CTemperature resolution0.1 degree (-20 to 200 degrees C), 1 degree outside this rangeStandard metInternational Organization for Standardization (ISO) 17025Dimensions, probe (length x diameter)5.75 x 0.14 inchesCable length10 ft.Dimensions, base (diameter x D)2.1 x 0.563 inchesD is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory setti...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $143.45
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4134
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4134
Recorder jack provides a millivolt signal output. This enables thermometer to be used with any chart recorder, strip recorder, or computer that accepts millivolt signals. Output results on demand: Monitor conditions in chambers, clean rooms, food processing, scientific labs, and all temperature-sensitive manufacturing operations. Recorder output provides a hard copy for today’s stringent QC documentation requirements. Output specifications are 1 mV output per degree in 0.1 degree display mode and 0.1 mV output per degree in the 1 degree display mode. Range is -50 to 1999 degree F and -50 to 1300 degree C, with a meter only accuracy of +/-0.3percent of the reading plus 1degree C. Resolution is 0.1 degree from -50 to 199.9 degree and is 1 degree for other readings. Stores highest readings reached: Maximum button captures the highest reading achieved. HOLD button freezes display to capture current reading. Uses all Type-K thermocouples. Large, bright, 1/2" high, four-digit LCD can be read from 10 feet away. Handheld unit is completely portable and designed for years of dependable and reliable service. Traceable to NIST for accuracy: To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Comes ready to use with fast-response, Type-K beaded probe with 4 foot cable length, 9-volt battery, recorder output jack, and Traceable Certificate. Size is 2-3/4" width by 5-1/4" height by 1-1/4" thick and weight is 5-1/2 ounces.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $149.75
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4003
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4003
The Thomas Traceable Waterproof Type K Thermometer is used in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. The thermometer measures temperature from -200 to 1300 degrees C (-328 to 2372 degrees F), with an accuracy of + or - 0.3 percent plus 1 degree C. The Type K thermocouple probe has a 4 ft. cable. The LCD display has 5/8"-high digits that are visible from up to 10 ft. and has a backlight for low-light situations. The thermometer has a hold feature to freeze the display and capture the current reading. The unit is waterproof and includes a "boot" that fits over the thermocouple to keep water from seeping in around the thermocouple attachment. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure temperature in industrial furnaces, kilns, and freezers.SpecificationsPower source(1) 9V batteryTemperature range-200 to 1300 degrees C (-328 to 2372 degrees F)Temperature accuracy (-50 to 1000 C)+ or - 0.3 percent plus 1 degree CTemperature accuracy (all other measurements)+ or - 0.5 percent plus 1 degree CTemperature resolution0.1 degreeStandard metInternational Organization for Standardization (ISO) 17025Weight8 oz.Dimensions (H x W x D)7 x 2.33 x 1.25 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $112.40
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4015
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4015
The Thomas Traceable Total-Range Thermometer is used in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. The thermometer measures temperature from -200 to 1370 degrees C (-328 to 2498 degrees F), with an accuracy of + or -0.2 degrees C. The Type-K thermocouple probe is attached to the base with a four-foot cable. The thermometer has a minimum/maximum temperature memory and a 24-hour countdown timer for long-term monitoring and a hold feature to freeze the display and capture the current reading. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure temperature in industrial furnaces, kilns, and freezers SpecificationsPower source(3) AAA batteryTemperature range0 to 50 degrees C (22 to 122 degrees F)Temperature accuracy (-50 to 1000 C)+ or - 2 degrees CTemperature resolution0.1 degree C (-50 to 1000 degrees C), 1 degree outside this rangeStandard metInternational Organization for Standardization (ISO) 17025Weight8oz.Dimensions (H x W x D)7 x 3.25 x 1.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end of each conductor, which can be used to determine the temperature. Different alloys are used for different temperature ranges. Thermocouple thermometers are used in applications that require a large temper...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $49.99
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI147-00
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI147-00
The HI147-00 Checkfridge C Remote Sensor Thermometer is used to monitor temperature in freezers, incubators, and refrigerators. The thermometer measures temperature from -50 to 150 degrees C, with an accuracy of + or - 0.3 degrees C. The 40mm/1.6" long probe is made of food-grade stainless steel and is attached to the thermometer by a 1m/3.3ft. cable. The internal calibration feature is activated by flipping a switch and increases the accuracy of test readings. The thermometer has magnetic backing for mounting on metal surfaces. The HI147-00 is used to measure temperature in laboratories, food service, and food storage.SpecificationsPower source(1) AAA batteryTemperature range-50 to 150 degrees CTemperature accuracy+ or -0.3 degrees CTemperature resolution0.1 degree CWeight60g/2.1oz.Dimensions (H x W x D)93 x 39 x 31mm/3.7 x 1.5 x 1.2 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 standards.What’s in the Box?Hanna Instrument...
|
|