Digital Thermometers - Page 61

Manufacturer: Test Products International, Inc Brand: TPI Model: 315C

The TPI 315C auto field-calibrated, water resistant, stem-style digital thermometer with penetration tip is for monitoring temperature in food service, electrical testing, and heating, ventilation, and air conditioning applications. It measures temperature from -50 to 150 degrees C (-58 to 300 degrees F) with an accuracy of + or - 1 degree C (2 degrees F). The thermometer can be calibrated in an ice bath to preserve the accuracy of readings. The LCD screen shows the current temperature. The operator can choose to display readings in degrees Fahrenheit or Celsius. The stem-style probe is 2.8" long and has a penetration tip for taking measurements while immersed in liquid or air. The tapered stem measures 0.115" (2.9 mm) in diameter and can fit into a Pete's plug. A hold function keeps a reading on display so it can be recorded. The body is made from reinforced plastic, which resists impact and wear. It has an ingress protection rating of IP67, meaning it is protected against dust and the effects of immersion up to 39" (1 m). It can withstand drops of up to 10 feet. A magnetic clip slides onto the body of the thermometer to provide hands free use for applications such as duct repair. The thermometer runs on one LR44 button battery (included). The thermometer automatically turns off after a period of non-use to conserve battery life, and a low battery indicator signals when the battery needs to be replaced.SpecificationsTemperature measurement range-50 to 150 degrees C (-58 to 300 degrees F)Accuracy+ or - 1 degree C (2 degrees F)Resolution0.1 degree C or FSample rate1.5 secondsStem length71 mm/2.8 in.Tip diameter at sensor2.9 mm/0.115 in.Ingress protection ratingIP67Power supplyLR44 battery (one, included) Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricit...

Manufacturer: Test Products International, Inc Brand: TPI Model: 312C

The TPI 312C auto field-calibrated, water resistant, stem-style digital thermometer with penetration tip is for monitoring temperature in food service, electrical testing, and heating, ventilation, and air conditioning applications. It measures temperature from -50 to 150 degrees C (-58 to 300 degrees F) with an accuracy of + or - 1 degree C (2 degrees F). The thermometer can be calibrated in an ice bath to preserve the accuracy of readings. The LCD screen shows the current temperature. The operator can choose to display readings in degrees Fahrenheit or Celsius. The stem-style probe is 5" long and has a penetration tip for taking measurements while immersed in liquid and air. The tapered stem measures 0.12" (3.1 mm) in diameter and can fit into a Pete's plug. A hold function keeps a reading on display so it can be recorded. The body is made from reinforced plastic, which resists impact and wear. It has an ingress protection rating of IP67, meaning it is protected against dust and the effects of immersion up to 39" (1 m). It comes with a sheath that helps protect the stem from damage during transport and storage. The sheath has a clip that can be secured to a pocket for carrying when not in use. The thermometer runs on one LR44 button battery (included). The thermometer automatically turns off after a period of non-use to conserve battery life, and a low battery indicator signals when the battery needs to be replaced.SpecificationsTemperature measurement range-50 to 150 degrees C (-58 to 300 degrees F)Accuracy+ or - 1 degree C (2 degrees F)Resolution0.1 degree C or FSample rate1.5 secondsStem length127 mm/5 in.Tip diameter at sensor3.8 mm/0.15 in.Ingress protection ratingIP67Power supplyLR44 battery (one, included) Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduc...

Manufacturer: UCTRONICS Brand: UCTRONICS

Name: Blue LED -30-800 Degrees digital thermometer Features: Dimension:48x29x23mm Cutting size: 45.5x26mm Display size: 35x18mm Test temperature rang:-30-800 degree Temperature accuracy : +/- 0.3degree Supply voltage: DC12 +/- 2V Power supply interface: DC12 +/- 2V Display color: blue Case color:black Refresh rate:about 500ms/time Operating temperature:-20 degree to 50 degree Resolution:less than 100 degree is 0.1 degree, more than 100 degree is 1 degree Reverse polarity protection Self power consumption:

Manufacturer: Sper Scientific Brand: Sper Scientific

Pen-size meter that measures Humidity, Temperature & Dew Point| Min/Max. Technicians in HVAC, labs, industry and environmental studies can carry this sturdy metal pen anywhere for quick spot checks of RH (Relative Humidity), ambient temperature and dew point. Simultaneously displays RH and temperature in ºC or ºF on a backlit LCD. The pen stands upright on its base, enabling unobstructed airflow around the sensor. Also features hold, auto power off option, and min/max. Comes with a standard AA battery and instructions. N.I.S.T. traceable certificate of compliance available.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI145-30

The HI145-20 T-Shaped Thermometer is used to monitor temperature in semi-frozen and semi-solid food and liquids. The thermometer measures temperature from -50 to 220 degrees C, with an accuracy of + or - 0.3 degrees C. The 300mm/12" long AISI 316 stainless steel probe has a penetration tip for use in solids. The automatic internal calibration feature increases the accuracy of test readings. The thermometer has a T-shaped handle for use in applications that require force for thermometer insertion. The HI145-20 is used to measure temperature in laboratories, food service, and food storage.SpecificationsPower source(1) AAA batteryTemperature range-50 to 220 degrees CTemperature accuracy+ or - 0.3 degrees C from -20 to 90 C; + or - 0.4% outside this rangeTemperature resolution0.1 degree C (-50 to 199.9 degrees C), 1 degree C outside this rangeWeight65g/2.3oz.Dimensions (H x W x D)165 x 92 x 38mmH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 ...

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 32311-K

The Cooper-Atkins EconoTemp 32311-K dual-range digital Type K thermocouple thermometer is used for monitoring temperatures of food products. It measures temperature from -40 to +500 degrees F (-40 to +260 degrees C), with an accuracy of + or - 2 degrees F (1 degree C) at ambient temperatures 68 to 86 degrees F (20 to 30 degrees C). This thermometer accepts standard Type K thermocouple probes (sold separately). It has a molded rubber casing for impact and water resistance. The unit operates on a three AAA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and the NSF (formerly National Sanitation Foundation) listing indicates compliance with applicable safety standards. It is compliant with Waste Electrical and Electronic Equipment (WEEE) and Restriction of Hazardous Substances (RoHS) standards. It comes with a protective rubber casing, a lanyard, and instructions.SpecificationsTemperature measurement range-40 to +500 degrees F (-40 to +260 degrees C)Resolution1 degreeAccuracy+ or - 2 degrees F (1 degree C) at ambient temperatures 68 to 86 degrees F (20 to 30 degrees C)LCD height0.4" (10.2mm)Standards metCE, NSF, RoHS, WEEEPower supply(3) AAA batteriesWeight0.4lb./181g (including batteries and casing)Dimensions with casing6.75 x 2.6 x 1 inches (171 x 66 x 25mm) (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the o...

Manufacturer: Amprobe Brand: Amprobe Model: TMD-51

The Amprobe TMD-51 dual-input thermometer with built-in memory accepts two K- or J-type thermocouples, and is designed to measure two temperatures simultaneously in a variety HVAC, electrical, industrial, and automotive maintenance applications. The thermocouples support superheat and subcool applications, and cut-out and cut-in temperature measurements. The meter has an offset mode that can be used to compensate for thermocouple error. Dual-scale temperature readings range from -328 to 2,498 degrees F (-200 to 1,370 degrees C). Built-in memory saves up to 125 sample reading for later viewing. The meter has a back-lit LCD screen with data hold to save readings for later viewing, and displays minimum and maximum temperature with elapsed time, and average and relative temperature calculations. The device operates on one 9V battery (included), which provides approximately 200 hours of use. The auto-power-off feature turns the meter off after approximately 15 minutes, and can be disabled. A low battery indicator helps prevent false readings. The meter includes two K-type thermocouples, a carrying case, one 9V battery, and instructions. Specifications Display resolution 0.1 degree F/C Accuracy + or - 0.05 percent of reading + 1.4 degrees F (0.7 degrees C) K-type thermocouple temperature range -328 to 2498 degrees F (-200 to 1370 degrees C) J- type thermocouple temperature range -328 to 1922 degrees F (-200 to 1050 degrees C) Measurement rate 2.5 times/second Operating temperature 32 to 122 degrees F (0 to 50 degrees C), at less than 80 percent relative humidity Operating environment Indoors at altitudes below 2000 meters Storage temperature -4 to 140 degrees F (-20 to 60 degrees C), at less than 80 percent relative humidity Dimensions Approximately 6.3 x 3.3 x 1.5 inches (160 x 83 x 38 mm) (H x W x D) Weight Approximately 0.6 lb. (270g), with batteries installed H is height, the vertical distance from lowest to highest point; W is width, the horizontal...

Manufacturer: Thomas Scientific Brand: Thomas Model: 4372

The Thomas Traceable Flip-Stick Thermometer measures temperature in liquids and semisolids in laboratories, industrial settings, and food service. The thermometer measures temperature from -50 to 300 degrees C (-58 to 572 degrees F), with an accuracy of + or - 1 degree C between -20 and 100 degrees C. Its 4.5" stainless-steel probe is resistant to most laboratory chemicals. The probe flips out from the base and can be aligned at any angle. The LCD display has 3/4" high digits. The thermometer has minimum/maximum temperature memory for monitoring the consistency of temperatures. A hold function allows measurements to be kept on the screen for viewing. The thermometer is drop-proof from up to 5 ft. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to monitor temperature in liquids and semisolids in laboratories, food service, and industrial settings.SpecificationsPower source(1) AAA batteryTemperature range-50 to 300 degrees C (-58 to 572 degrees F)Temperature accuracy+ or - 1 degree C between -20 and 100 degrees CTemperature resolution0.1 degree (-20 to 200 degrees C), 1 degree outside this rangeStandard metInternational Organization for Standardization (ISO) 17025Weight2.375 oz.Dimensions, probe (length x diameter)4.5 x 0.14 inchesDimensions, base (H x W x D)11 x 1.5 x 0.625 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A micro...

Manufacturer: Thomas Scientific Brand: Thomas Model: 3133

Counter-Pen is a combination marker and digital counter designed for the lab and plant. Each time a black mark is made with the felt-tipped pen, it automatically sounds a beep, and LCD displays the counts. Use it to count cell growth on petri dishes, inventory parts, and tally samples received. Touch, sound, and count occur simultaneously. Impossible to make an error, even when interrupted marks hold your place and counter holds your total. Durable ABS plastic unit provides audio/visual counts to 99999 with reset button, on/off switch, and pen cap. Size is 6" length by 2/3" diameter and weight is 1 ounce.

Manufacturer: MDF Instruments USA Brand: MDF Instruments Model: MDFNT13-29 Color: NavyBlue/White (Abyss/BlaBlanc)

Temperature measurement does not need to be intrusive and upsetting to patients. With the MDF® Febris® Touch-Free Infrared Thermometer Touch-Free Technology, simply point towards the forehead and you'll get an instant and accurate reading. So say goodbye to the old fashioned methods (rectal, oral, ear, and auxiliary) that can often be inaccurate and distressing to feverish patients, especially fussy babies.With Touch-Free Technology there is no contact with the patient, so it is perfectly hygienic and eliminates cross-contamination. And since there is no need for probe covers, there is no more waste, so it's better for our environment.Display: Illuminated, backlit display is easy to read in low-light conditions. Features a fever indicator to quickly identify high measurements. Can also be used for objects and liquids, and switches easily between Fahrenheit and Celsius.Distance Sensor: Confirm accurate measurements and eliminate guesswork with the built-in distance sensor.Grip: A removable grip offers increased control.Memory Recall: Track measurements over time with 10 stored readings.