Digital Thermometers - Page 63

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 80060D1G4

The WIKA TI.80 solar-powered digital thermometer is used for monitoring temperature in biotechnical and chemical processing, composting, aviation, and power generation applications. It measures temperature from -50 to +300 degrees F or -50 to +150 degrees C with an accuracy of + or - 1% the scale. The back-mounted stem is available in lengths from 2-1/2" to 24" long and has a thermistor sensor in the tip for taking measurements. The stainless steel 304 body and stem are corrosion resistant and withstand high temperatures. The thermometer provides temperature updates every 15 seconds for monitoring. It is powered by a 3V solar cell that operates on 35 lux of light.SpecificationsTemperature range-50 to +300 degrees F or -50 to +150 degrees CTemperature Accuracy+ or - 1% the scalePower supply3V solar cellStem diameter0.25"Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.WIKA Instruments manufactures pressure, temperature, and level measurement instrumentation. Founded in 1946, the company has its US headquarters in Lawrenceville, GA, and meets International Organization for Standardization (ISO) standard 9001.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4048

The Thomas Memory Monitoring Thermometer is a digital thermometer used for monitoring the temperatures in liquids, gases, water baths, freezers, and refrigerators. The thermometer measures temperature from -50 to 70 degrees C (-58 to 158 degrees F), with an accuracy of + or -1 degree C. The 0.75" probe has a 10 ft. micro cable, which can be shut in a refrigerator door without creating a gap. The thermometer memory stores minimum/maximum values and has a temperature alarm that can be programmed to indicate audibly when the temperature exceeds a maximum or minimum value. The alarm will continue to sound even when the temperature returns to the set range, until it is turned off. This thermometer is traceable to National Institute of Standards and Technology, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. The Thomas Memory Monitor Thermometer is used in food storage, scientific laboratories, and other industries that require temperature monitoring.SpecificationsTemperature range-50 to 70 degrees C (-58 to 158 degrees F)Accuracy+ or - 1 degree CResolution0.1 degree C/0.1 degree FProbe length0.75"Probe diameter0.31"Cable length10 ft.Standard metInternational Organization for Standardization (ISO) 17025Weight4 oz.Dimensions (H x W x D)4.25 x 2.75 x 0.75 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital ther...

Manufacturer: Thomas Scientific Brand: Thomas Model: 4354

The Thomas Traceable extra-long stem digital thermometer is used for measuring the temperature of liquids in cuvettes, test tubes, flasks, and beakers. The thermometer measures temperature from -50 to 300 degrees C (-58 to 572 degrees F), with an accuracy of + or - 0.5 degrees C. The stainless-steel stem of the thermometer is 11.4" long and has a diameter of 0.13". The handle of the thermometer is 3" long with a diameter of 0.5", with an LCD display with 0.4"-high digits for increased visibility. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. The Thomas extra-long stem thermometer is used in tissue culturing, chemical experiments, and other scientific functions.SpecificationsPower source(1) Silver-oxide batteryTemperature range-50 to 300 degrees C (-58 to 572 degrees F)Accuracy+ or - 0.5 degree CStandard metInternational Organization for Standardization (ISO) 17025Stem length11.4"Stem diameter0.13"Weight0.15lb.Overall length14.4"Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Thomas Scientific manufactures lab supplies, equipment, chemicals, and instruments for scientific research. It is a registered contractor for the United States Federal Government. The company was founded in 1899 and is headquartered in Philadelphia, PA.What’s ...

Manufacturer: Perfect Prime Brand: Perfect-Prime Model: 9815 Color: Gray

Item Includes:1 x 4-Channel K-Type Digital Thermometer Thermocouple Sensor1 x user manual4 x Probe sensor (length ~ 95cm each)Product Specifications- Measurement Temperature range : - 200°C ~ 1372°C (-328°F ~ 2501°F)- (May require appropriate Thermocouple probes)Accuracy :> - 100°C (-148°F) : ± 1°C (± 1.8°F) - Typ.< - 100°C (-148°F) : ± 2°C (± 3.6°F) - Typ.K Type Temperature resolution :< 1000°C : 0.1°C/°F / K> 1000°C : 1°C/°F / KSize : 200 X 85 X 38 mmWeight : 230g (Without battery / probes)Operating PreparationPut in a 9V battery by opening the battery compartment cover using a screwdriver. The instrument requires Thermocouple probes to be inserted to measure temperatures.There are 4 probe sockets on the top and corresponding to T1 to T4 respectively. (The probe has + and - terminal and they need to be inserted into sockets with correct polarity) This instrument can't function with probe disconnected. This instrument is simple to use and please refer to below section for each key's function.

Manufacturer: Dickson Unigage Inc. Brand: Dickson

The MM125 is a simple, cost effective temperature monitoring tool. It does not track detailed temperature history but the min/max display does inform you of temperature highs and lows.

Manufacturer: Dickson Unigage Inc. Brand: Dickson

The MM120 is a simple, cost effective temperature monitoring tool. It does not track detailed temperature history but the min/max display does inform you of temperature highs and lows.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4233

Shockproof, pocket size thermometer is ideal for lab, plant and field use. New microchip design provides ultra low cost unit. Wide-range, fast-response, and one-switch operation make it the perfect routine thermometer. It is compatible with all Type-K probes. Range -50 to 750 degree C, with a resolution of 1 degree and meter accuracy of +/-(1 degree C + 0.75 percent) between 0 to 500 degree C and +/-(1 degree C + 1 percent) 500 to 750 degree C. Below 0 accuracies are: -20 degree C +/- 2 degree C, -40 degree C +/- 4 degree C, and -50 degree C +/- 5 degree C. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Comes ready to use with a fast-response, Type-K probe with beaded sensor, nylon carrying case, and 9-volt battery (150 to 200 continuous hours). Measures 2.75" width by 4.25" height by 7/8" thick and weight is 4 ounces.

Manufacturer: Extech Brand: Extech Model: 42530 Color: GREEN

FEATURES Two models with choice of range and resolution Model EH42530: Wide range temperature measurements from 58 to 1000 °F, 0.1 ° resolution Model EH42529 : Basic model measures temperature from 0 to 600 °F, 1 ° resolution Built-in laser pointer identifies target area Backlighting Audible and visible overrange indicators Automatic Data Hold when trigger released Fixed 0.95 Emissivity covers 90% of surface applications Auto Power Off Complete with 9V battery

Manufacturer: Thomas Scientific Brand: Thomas Model: 4047

The Thomas Traceable Monitoring Thermometer measures temperature in freezers, refrigerators, ovens, and water baths. The thermometer measures temperature from -50 to 70 degrees C (-58 to 158 degrees F), with an accuracy of + or - 1 degree C. The 0.8" temperature probe is attached to the base by a 10-foot cable. The 0.75" LCD display shows either ambient temperature or probe temperature with the push of a button. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure air temperature and humidity in food service, scientific laboratories, and industrial settings.SpecificationsPower source(1) AAA batteryTemperature range-50 to 70 degrees C (-58 to 158 degrees F)Accuracy+ or - 1 degree CResolution0.1 degree CStandard metInternational Organization for Standardization (ISO) 17025Weight2.5oz.Dimensions (H x W x D)3.25 x 2.25 x 0.63 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Thomas Scientific manufactures lab supplies, equipment, chemicals, and instruments for scientific research. It is a registered contractor for the United Stat...

Manufacturer: Extech Instruments Brand: Extech Model: 42530-NIST

8:1 Infrared Thermometer with laser pointer that features a built-in laser pointer and is Degree/Degree switchable. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).