Digital Thermometers - Page 4

Manufacturer: Thermco Brand: THERMCO

Thermco's CT375DIG & CT376DIG are a very accurate temperature measuring systems. With the accuracy of 0.1 °C and resolution of 0.01°C, it will ful?ll the most critical measuring requirement. The unit is equipped with stand and large backlight LCD that makes this unit perfect to setup a test station on the site.

Manufacturer: Thermco Brand: THERMCO

For Incubators, -50 to 70C, Certified at +37C

Manufacturer: Cole-Parmer Brand: Digi-Sense Model: AO-90000-37

This thermometer has two temperature sensors-a built-in air sensor and an independent external probe sensor with 3 1/2 foot cable. The external probe can be used to monitor temperatures of liquids, air/gas, and semisolids. Alarm configurations can be set up for four conditions: temperature above a setting, below a setting, between two settings, or outside two settings. A green or red light will Blink and an audible alarm will sound when one of these conditions is detected. The alarm will sound every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off. What's included: mounting tape, probe suction cup, built-in flip open Bench stand, one AAA battery, and nist-traceable calibration report supplied by the manufacturer. Four different alarm configurations Jumbo digital display is easy to read from a distance remote, heat-resistant probe

Manufacturer: Thomas Scientific Brand: Thomas Model: 4121

Triple display constantly shows minimum/maximum, and current temperatures. Instantly view if freezer, water bath, or incubator is within temperature spec. Monitor temperature of any experiment when you’re not there-overnight, weekends. Range is -50 to 70 degree C. Resolution is 1 degree and accuracy is +/-1 degree C. Sensor and 10-foot cable may be placed under water, in refrigerator, or freezer. Small cable diameter (1/16") allows refrigerator doors to close on it with no effect. Unplugging the cable activates a sensor inside the unit for monitoring ambient room temperature. Simple, one-button operation resets the minimum/maximum memories. Probe’s wire-mounting bracket permits easy sensor placement. Low battery is signaled on the display. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Unit’s high-impact ABS plastic case has a flip-open stand, wall hanging hook, magnet and Velcro mounting tape. Measures 2-1/2" width by 2-5/8" height by 3/4" thick and weight is 1-7/8 ounces. Unit runs continuously for 1 year on the supplied battery.

Manufacturer: Taylor Instruments Brand: Taylor Instruments

Taylor Dishwasher Temperature Test Strip - 25 per pack -- 12 packs per case. Single-use, disposable strips. Date and time can be written directly on strip.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: D010601WI

WIKA's TI.D01 solar industrial thermometer offers fast, accurate, and easy-to-read temperature indications. This thermometer features a totally adjustable case to permit viewing at any angle, and its bulb and socket are completely interchangeable with standard industrial glass thermometers. The solar industrial thermometer is switchable between Fahrenheit and Celsius, and offers a sensing range of -50 to 300 degree F and -50 to 150 degree C, resolved in tenths of a degree, with accuracy to within +/-1 percent of reading. Resolution: 1/10 degree between -19.9/199.9 degree F (-28/93 degree C). Lux rating: 10 Lux (one foot candle). 10 seconds Update. Ambient operating temperature: -30/140 degree F (-35/60 degree C). Humidity: 100 percent maximum. High-impact ABS Case. 3/8" Display; LCD Digits, wide ambient temperature range. Sensor: glass passivated thermistor. Stem material: aluminum. Available with brass thermowell. Limited one year warranty.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 9364

The Cooper-Atkins 9364 i-Button reader cable works with the Cooper-Atkins TransTrak 10188-NIST data logger kit to monitor and transmit storage temperatures during the transportation of blood, specimens, medication, food, reagents, and other perishables. The i-Button reader is compatible with the Cooper-Atkins 10188-NIST TransTalk NIST-traceable data logger kit. Cooper-Atkins manufactures time, temperature, and humidity instruments for industrial, HVAC/R, health care, and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.

Manufacturer: TECHNE INCORPORATED Brand: Techne Model: SMP1/1

It offers the flexibility of two RTD input channels, along with direct temperature readout in degrees °F, °C and ohms. Combine the Tecal Accu-Temp with one of our PRT's for a high accuracy temperature measurement system.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 9015

This high quality 50' extension cable will accurately send temperature readings to your display. Cooper recommends that cable lengths do not exceed 1000 ft due to inaccurate readings. Can be used with any thermistor units

Manufacturer: Industrial Grade Brand: Industrial Grade

Remote Mount Thermometer, Vapor Actuated, Display Analog, Temp. Range 0 to 100 F, Mounting Surface With Back Outlet, Dial Size 3.5 In., Accuracy +/-1 Scale Division, Line Length 60 In., Line Length 5 Ft., Sensor Dimension 7/16 In., Power Source Vapor, Case Material Stainless Steel, Tube Material Bronzed Braided Copper, Lens Material Polycarbonate