Digital Thermometers - Page 10

Manufacturer: Reed Brand: Reed Instruments Model: ST-8839

The Reed ST-8839 infrared thermometer is for measuring temperature in industrial applications such as heating, ventilation, and air conditioning installations. The infrared sensor takes measurements from a distance for applications involving hard-to-reach, moving, hot, or electrified equipment. It measures temperature from -50 to 1000 degrees C (-58 to 1832 degrees F) with an accuracy of + or - 2% of the reading. The infrared sensor has a 50:1 distance-to-spot ratio, which means the measurement field measures approximately 50 feet in diameter when the target is 1 foot away. It has an adjustable emissivity setting to help improve measurement accuracy on a range of surface types. A built-in laser pointer helps improve aiming accuracy when taking infrared measurements. The LCD screen can display the current temperature, the highest or lowest temperature reading for the session, the average temperature for the session, and the difference between two temperatures. The operator can choose to display readings in degrees Fahrenheit or Celsius. The hold function keeps a measurement on the display so it can be recorded. The display is backlit for readability in low light. The operator can set high and low temperature alarms to sound when measurements exceed or drop below the preset limits. The thermometer operates on one 9V battery (included). A carrying case is provided for transport and storage.SpecificationsTemperature measurement range-50 to 1000 degrees C (-58 to 1832 degrees F)Accuracy+ or - 2% of readingResolution0.1 degrees C or F at up to 200 degrees C or F; 1 degree at greater than 200 degrees C or FDistance-to-spot ratio50:1Emissivity range0.10 to 1.0, adjustableResponse timeLess than 1 secondPower supply9V battery (one, included)Weight290 g (10.2 oz.)Dimensions*230 x 100 x 56 mm/9 x 2.2 x 3.9 in. (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermomet...

Manufacturer: Sinometer Brand: Sinometer Model: VC97 Color: VC97

The Sinometer VC97 is a True RMS professional fully featured digital multimeter as well as a thermometer. This is an auto raging meter that will give reading when you plug it in at any times. This is a 3 3/4 digits meter that reads 3999, this gives you much higher accuracy than a meter with a reading at 1999 only. The back light on the LCD gives you convenience in a dark, and auto power off saves the battery in a long run. It comes with a pair of test leads and a set of thermocouples, it works on a 9 V battery, a test battery is included. You can use it to measure AC/DC voltage and current, resistance, capacitance, frequency and temperature both in Fahrenheit and Celsius. This meter comes with all the accessories and 1 year manufacturer's warranty. 　 Specifications: DCV:0-400m-4-40-400-(±0.5%)-1kV(±1.0%) ACV:0--400mV(±1.5%)-4-40-400V(±0.8%)-750V±1.5% DCA:0-400uA-4000uA-40m(±1.2%)-10A(±2.0%) ACA(True RMS):0-400uA-4000uA-40mA-400mA(±1.5%)-10A(±2.0%) Resistance: :0-400-4k-40k-400k-4M(±0.8%)-40M(±1.2%)ohm CAP:0-20nF-100nF-10uF-100uF(±3.5%)1mF/10mF/100mF (±5.0%) Frequency: 0-100Hz-1000Hz-10KHz-1MHz-30MHz(±0.5%) Temperature: C: -40 ºC - 1000ºC Transistor and Diode test Audible continuity:< 70 ohm Accessories: *A pair of test leads * 9V battery         *K-Type Thermo probe and a Capacitance adapter          *User manual ( Details see the manual book)

Manufacturer: General Tools & Instruments Brand: General Tools Model: DT62

General Tools & Instruments DT62 Dual-Channel Digital Thermocouple Thermometer is ideal for measuring temperature in an industrial, commercial or laboratory environment. It features minimum, maximum and average memory, data hold button and adjustable auto power off trigger that is adjustable from 5 minutes to 1 hour and can be disabled. Accepts Type K, J, T or E probes. Displays difference between thermocouple readings T1-T2. Has 2.4-inch LCD with dual temperature readouts and relative time clock readout. Adjustable relative time clock enables resetting measurement timeline. Basic accuracy is +/-0.5 percent. Choice of three temperature units - degrees Celsius, degrees Fahrenheit and Kelvin. Manual temperature compensation (offset) for thermocouples. Includes 2 K type bead thermocouple probes, user's manual and 1 Year Limited Warranty. Powered by 9V battery, not included.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Manufacturer: Test Products International, Inc Brand: TPI Model: 370

The TPI 370 infrared thermometer is for measuring temperature in automotive repair, manufacturing, and heating, ventilation, and air conditioning applications. It measures temperature from -10 to 260 degrees C (14 to 500 degrees F) with an accuracy of + or - 2% of reading or 3.5 degrees F, whichever is greater. The infrared sensor takes measurements from a distance for applications involving hard-to-reach, moving, hot, or electrified equipment. The thermometer has an 8:1 distance-to-spot ratio, which means the measurement field measures approximately 8 feet in diameter when the target is 1 foot away. The LCD screen displays the current measured temperature, and the operator can choose to display readings in degrees C or F. The backlit display is readable in low light. A hold feature keeps a reading on the display so it can be recorded, and the trigger lock allows continuous measurements. The thermometer operates on one 9V battery (included) and it automatically turns off after 10 seconds of non-use to conserve battery life. It comes with a soft carrying case for transport and storage.SpecificationsTemperature measurement range-10 to 260 degrees C (14 to 500 degrees F)Resolution0.1 degree C or FAccuracy, at 23 degrees C and 0.95 emissivity+ or - 2% of reading or 3.5 degrees F, whichever is greaterDistance-to-spot ratio8:1Emissivity0.95, fixedResponse time1 secondOperating temperature0 to 50 degrees C (32 to 120 degrees F)Power supply9V (one, included)Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industr...

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: HT200

The HT200 is a Heat Stress WGBT Meter which enables accurate measurements for Wet Bulb Globe Temperature (WGBT), Black Globe Temperature (TG), Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW). Heat Stress Index measures how hot it feels when humidity is combined with temperature, air movement and radiant heat. Stores up to 50 readings. Comes with 9V battery, carrying case and AC adapter.

Manufacturer: Thermco Brand: THERMCO

Thermco's Ultra Low Freezers Digital Thermometer is able to monitor temperatures down to -100°C. Thermometer is NIST Traceable. The probe is housed in a 60ml PETG plastic bottle, filled with USP sand which insulates the sensitive section of the probe to maintain temperature during the opening and closing of the door.

Manufacturer: Industrial Grade Brand: Industrial Grade

Remote Mount Thermometer, Vapor Actuated, Display Analog, Temp. Range 30 to 240 F, Mounting Bracket, Dial Size 3.5 In., Accuracy +/-1 Scale Division, Line Length 60 In., Line Length 5 Ft., Sensor Dimension 7/16 In., Power Source Vapor, Case Material Stainless Steel, Tube Material Bronzed Braided Copper, Lens Material Polycarbonate

Manufacturer: XZB Brand: XZB

FEATURES Quickly and conveniently take accurate humidity and temperature readings. It is an ideal humidity&temperature meter instrument with scores of pratical applications for laboratorial,industrial, engineer and professional use. SPECIFICATIONS Temperature Measuring Range: -10?~50? Humidity Measuring Range: 5%RH~98%RH Accuracy of Temperature: ±1.5? Accuracy of Humidity: ±5%RH(5~40%)±3%(41%~80%) ?/?Selection :YES Auto /Manual Power Off :YES Battery Indication :YES Temp. Resolution: 0.1?/0.1%RH Humidity Resolution: 0.1%RH Max/Min Measurement :YES K-type Thermocouple Measuring --- Sampling Frequency: 2.5 times/sec PACKING INFORMATION Power: 9V battery Product Net Weight: 145g Product Size: 224*66*33mm Packing :Gift Box Standard Quantity Per Carton: 20pcs Product Size: 45*32*55cm Standard Carton Gross Weigh:t 13.4kg

Manufacturer: OAKTON Instruments Brand: Oakton Model: 1190Q48EA

These thermometers are ideal for laboratory, field, and process measurements. Use to quickly verify temperature. Typical response time is 30 seconds for 99% of new reading. Thermometers have a 304 stainless steel penetration stem. All models include a protective case with pocket clip and a battery. Thermometer features a sealed case—ideal for use with liquids. It has °F/°C switchable ranges, a MIN/MAX button, and a one-second display update. Use ON/OFF button to conserve battery life.

Manufacturer: Test Products International, Inc Brand: TPI Model: 320C

The TPI 320C auto field-calibrated, water resistant, stem-style digital thermometer with needle penetration tip is for monitoring temperature in food service, electrical testing, and heating, ventilation, and air conditioning applications. It measures temperature from -50 to 150 degrees C (-58 to 300 degrees F) with an accuracy of + or - 1 degree C (2 degrees F). The thermometer can be calibrated in an ice bath to preserve the accuracy of readings. The LCD screen shows the current temperature. The operator can choose to display readings in degrees Fahrenheit or Celsius. The stem-style probe is 2.8" (71 mm) long and has a needle penetration tip for taking immersion and air temperature measurements in tight spaces. A hold function keeps a reading on display so it can be recorded. The body is made from reinforced plastic, which resists impact and wear. It has an ingress protection rating of IP67, meaning it is protected against dust and the effects of immersion up to 39" (1 m). It comes with a sheath that helps protect the stem from damage during transport and storage. The sheath has a clip that can be secured to a pocket for carrying when not in use. The thermometer runs on one LR44 button battery (included). The thermometer automatically turns off after a period of non-use to conserve battery life, and a low battery indicator signals when the battery needs to be replaced.SpecificationsTemperature measurement range-50 to 150 degrees C (-58 to 300 degrees F)Accuracy+ or - 0.5 degrees C at 0 to 70 degrees C; 1 degree C at less than 0 or greater than 70 degrees C (+ or - 1 degree F at 32 to 158 degrees F; + or - 2 degrees F at less than 32 or greater than 158 degrees F)Resolution0.1 degree C or FSample rate1.5 secondsStem length71 mm/2.8 in.Tip diameter at sensor1.6 mm/0.06 in.Ingress protection ratingIP67Power supplyLR44 battery (one, included) Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both....