DwyerÂ® MagnehelicÂ® Differential Pressure Gage, 2015-LT, 0-15" w.c. with Low Temperature Option
Manufacturer: Dwyer Instruments, Inc.
The Original DwyerÂ® MagnehelicÂ® gage for high accuracy - guaranteed within 2% of full scale - and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless MagnehelicÂ® gage movement, it quickly indicates low air or non-corrosive gas pressures - either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The MagnehelicÂ® gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment. (Standard model shown in picture.)
120v Electric Brew Pot / Electric Still Boil Controller
Our controller can be used by itself to boil up to 5 - 6 gallons of wort but time to boil will be about 55 minutes. A much better use would be to use this controller & an electric heating element together with your electric stove top or a second 120V element plugged into another 20 Amp circuit to bring from 5 to 12 gallons to a boil. Features: Designed to control your rate of boil - no temperature feedback. 6', 14 Gauge, 3 wire heavy duty power cord. Water resistant housing. Full linear control. Low cost compared to other solutions. Controls up to a 2250 Watt electric heating element Simple, easy to use design - just plug in and use.
Strange Brew Fast Ferment Plastic Wall Mount Conical Fermenter(Stand Not Included), 7.9 gallon
The fast ferment is the only conical fermenter with a collection capsule at the base. With the collection capsule, you will be able to take sediment or trub from the bottom -- no more racking. If you're making wine, you can either bottle or filter directly from the unit. If you're making beer, you can prime the beer through the opening on the top, open the valve and bottle. Or just open the valve and run the line into your keg. Capacity is 7.9 gallons. Please note that this Fast Ferment is a wall-mounted unit and needs to be installed on a concrete wall or anchored into wooden (not metal) studs. Wall mount is included. Does not include floor stand.
This kit comes complete with:
1 - 6' 3 wire 30 amp power cord with 3 prong twist lock plug end and equipment end pre-terminated with the correct ring terminals. 1 - 5500 watt CAMCO style folded over style ultra low watt density water heater element. 1 - Soft silicone water heater element gasket - works better than O-ring or the original style neoprene gasket. 1 - Metal box suitable for wet locations, with hole pre-drilled in the back for your electric heating element. 1 - Metal box lid with gasket and screws, suitable for wet locations. 1 - Water resistant fitting to hold the power cord in place. 1 - 1 inch pipe size stainless steel nut to hold your water heater element in from the inside
Dwyer Differential Pressure Transmitter, 616KD-02, DIN Mount, 0-3" w.c.
Manufacturer: Dwyer Instruments, Inc.
The Series 616KD Differential Pressure Transmitters with One-TouchÂ® technology are designed for simplicity making them the ideal choice for installers and maintenance professionals. The One-TouchÂ® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional transmitters which require time to annually remove the product from service plus the additional time to actually perform a complete full-span calibration.
120v Electric Brew Pot / Still Pot Kit with all Stainless Steel 1650 Watt Element
This kit comes complete with:
1 - 8' 14X3 16 amp power cord with molded on plug end and equipment end pre-terminated with the correct ring terminals. 1 - 1650 Watt 304 stainless steel with threaded 304 stainless base, folded over style low watt density water heater element. 1 - pliable silicone type AG-1 style water heater element gasket - works better than O-ring. 1 - Metal box suitable for wet locations, with hole pre-drilled in the back for your electric heating element. 1 - Metal box lid with gasket and screws, suitable for wet locations. 1 - Water resistant fitting to hold the power cord in place. 1 - 1 inch pipe size stainless steel nut to hold your water heater element in from the inside
' Pressure Transmitter, Pressure Range (In. WC) 0-5, Output 4-20mA, Power Required 16 to 35 VDC, Connection Barbed, Dual Size to Fit 1/8 In. and 3/16 In. (3 mm & 5 mm) ID Rubber or Vinyl Tubing, Loop Resistance DC at 1000 Ohms Max, AC at 1200 Ohms Max, Output Accuracy +/-2 Percent FS, Includes Instruction Manual '
Manufacturer: Home Brew Ohio
Brand: Home Brew Ohio
Sturdy yet lightweight glass makes this the perfect for fermenting your favorite beer or wine. This can also be used for brewing iced coffee, tea or lemonade and the jar will keep it cold and delicious. The 4" wide mouth is great for reaching deep inside and also for cleaning.Constructed of USDA certified food grade glass to avoid absorption of flavors and leaching of chemicals, dishwasher safe. Dimensions: 10" tall, 4" wide opening. The lids are made of plastic so it will not corrode like metal lids. Lids are solid, not drilled.
The Skitterbot - a perfect synthesis between an Alien and a Cockroach! These little remote controlled robots will reach a maximum speed of about 30 cm/sec. and can be easily recharged over a USB-Port. By using the included remote control, the normal functions (forward, backwards, left, right, stop) can be operated. The Skitterbots come in 4 different colours (delivered according to the random principle), which are controlled by different frequencies, so e. g. challenging battles between multiple mini-robots are possible. Technical Information: Dimensions: Skitterbot: 8 x 7 x 3cm, remote contoll: 8 x 3 x 1cm Power Supply: Skitterbot: integrated Lithium-Polymer-Accumulator, recharged by USB (charging cable included), remote control: 3 Lithium button cells (included); charge for 10 minutes, play for 15 minutes.