Measuring & Testing - Page 191

Manufacturer: Thermco Brand: THERMCO

Fluoro-Polymer Coated Thermometers, Low Temperature, Partial and Total Immersion, Red Spirit -100 to 50C

Manufacturer: Tel-Tru Manufacturing Company Brand: Tel-Tru Model: 34100662

The Model GT300R is the best 3" dial back connected thermometer for heavy duty applications. The unique stem groove to identify the min. immersion for accurate reading. Glass window that is fully gasketed.

Manufacturer: Extech Brand: Extech Model: PH305

' Electrode, pH/mV/Temperature, For Use With G1570021, G0797291 and G0406402 '

Manufacturer: Miljoco Brand: Miljoco Model: SX93531 Color: Blue organic-filled glass tube

Industrial thermometer, 9" cast aluminum case, acrylic lens, blue spirit-filled liquid in glass, adjustable angle 3.5" aluminum stem with 1-1/4" 18 UNF brass coupling nut, -40 to 110°F / -40 to 40°C temperature range.

Manufacturer: Thermco Brand: THERMCO

Thermco's ACCU-SAFE - Enclosed Chamber Thermometers are precise, reliable and an economical means of measuring critical temperatures in Blood Bank Refrigerators, Ultra-Low Freezers, Freezers, Refrigerators, Incubators, Ambient/Room, Block Heaters and Ovens. All thermometers have their own unique serial number and is supplied with a NIST (National Institute of Standards and Technology) certificate to indicate the traceability of each thermometer and the standard used in the certification testing. ACCU-SAFE Environmentally Friendly Thermometers are Spirit-Filled (Non-Mercury). Mercury model also available. Each thermometer is encapsulated in a PTEF flouropolymer safety-shield which absorbs shock, and will enclose the liquid and splintered glass within the coating should breakage occur. There by keeping contaminants from user and environment. ACCU-SAFE thermometers are housed in a unbreakable plastic bottle filled with a "NON-TOXIC" Bio-Safe insulating liquid. This medium is used to maintain the temperature to insure accurate temperature readings without being affected by opening and closing of chamber door. All Thermometers have thoroughly annealed glass and engraved stems for lasting accuracy in 0.1°C, 0.5°C and 1.0°C divisions to enhance the critical measurements demanded by today's regulatory agencies. Space Saving Magnets are supplied which can be adhered to the bottle allowing the thermometer to be attached to a steel wall or door. Block Heater thermometers are housed in a 1.5ml MICRO centrifuge tube with 1ml of USP white mineral oil.

Manufacturer: Proprietary Brand: Bel-Art Products Model: B60802-0000

For use in solar heating systems, residential and commercial boilers, swimming pool heaters or refrigeration equipment. External adjustment nut allows for simple thermometer recalibration. Choose from brass or steel well and straight or angle form. Includes 1/2” NPT threaded connection and contains red organic liquid against white back glass. Measures 50mmW x 125mmH (2 x 4.9"). DURAC thermometers are hand inspected by our U.S. quality team in our exclusive triple accredited/registered ISO/IEC 9001:2008, ISO/IEC 14001:2004, ISO/IEC 17025:2005 facility and A2LA Accredited Calibration Laboratory; internationally recognized and accepted by the signatory economies of the ILAC/MRA.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

science-lab-ph-meters

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: ACC300DIG

Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end of each conductor, which can be used to determine the temperature. Different alloys are used for different temperature ranges. Thermocouple thermometers are used in applications that require a large temperature range and do not require a high degree of accuracy. These thermometers are used in kilns, turbine exhaust systems, and furnaces.Thermco Products, Inc. manufactures test and measurement equipment such as thermometers, hydrometers, anemometers, and data loggers. The company, founded in 2007 and headquartered in Lafayette, NJ, meets International Organization for Standardization (ISO) and International Electrotechnical Commission standard ISO/IEC 17025:2005.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI769828-0

Non-refillable pH sensor. Includes single junction. To be used with multiparameter meters.

Manufacturer: Bel-Art Brand: SP Scienceware Model: B61891-0400

Available in a variety of models measuring specific gravity of heavy and light liquids in various ranges from 0.650 to 2.000 in accordance with the American Society of Testing Materials (ASTM) E100 standards. Specific gravity hydrometers are the most widely used hydrometer, common in industries such as food and beverage, chemistry, pharmacology, transportation, refrigeration and more. Made of lead free ballast and glass, these plain form hydrometers conform to the accuracy requirements of ASTM hydrometers as listed. Each is individually serialized and has a temperature standardization of 60 degrees F. ASTM Hydrometers are hand inspected by our U.S. quality team in our exclusive triple accredited/registered ISO/IEC 17025:2005 and A2LA Accredited Calibration Laboratory; internationally recognized and accepted by the signatory economies of the ILAC/MRA and located in our ISO 14001:2004 Environmental Management System registered facility. They are packaged with a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy indicating accuracy traceable to NIST. Note: ASTM hydrometers should be stored in a clean, dry, safe place. They should not be subjected to extreme temperatures.