pH Meters - Page 60

Manufacturer: OAKTON Instruments Brand: Oakton Model: 1187M47EA

The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 850051

Easy to carry, simple to operate and sufficient for most field pH tests. Highly stable and accurate readings with a large LCD display. Designed for simple one-hand operation. Automatically calibrates to pH 4, 7, 10 buffers and can be adjusted to recognize non-standard buffers as well. Features hold function, and auto power off with low battery indicator. The case is IP65 waterproof, and will float if accidentally dropped into the water. Comes with 4 button-cell batteries and a built-in electrode kept moist with a protective cap. Dimensions: 6½" × 1½" × 1½" (165 × 38 × 38 mm) Weight: 2.3 oz (65 g) .

Brand: Hanna Instruments

Designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. Water-resistant and features a molded eye which allows installation above the sample area. Accurate measurements can be verified with one or two point calibrations. With a 12 Volt DC power supply included, low battery failures are never an issue. The electrode is interchangeable and the connector is well-protected behind a waterproof sheathing. Meter is supplied with a stainless steel probe, preventing potential grounding problems and ensuring extended electrode life. The gel-filled pH electrode has been specially designed to address the needs of growers. Its design guarantees greater clogging resistance in fertilizer solutions with high concentrations of phosphate, nitrate, etc.

Manufacturer: Milwaukee Instruments Brand: Milwaukee Model: MIMC110

- pH Monitor, Range: 0.0 to 14.0 - 2 Point Manual Calibration, Accuracy of ±0.2 pH - Set Point Range: 3.5 to 7.5 pH - LED Visual Alarm Active when reading is higher or lower (user select) than the set point Supplied with 12V DC Power Adapter, MA911B/2 Double Junction pH Probe, 20 ml pH 7.01 Calibration Solution and screwdriver for calibration. Unit also comes with mounting kit and probe holder.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 1219B74EA

Bench top level analysis in the field. Advanced pH Meter Kit (850056) Advanced pH Meter Kit includes: Advanced pH Meter 850055 in a hard carrying case complete with a detachable temperature compensated pH probe with 3½’ cable, pH buffers 4,7,10 and distilled water. Kit Dimensions: 14" × 9" × 2¾" (356 × 229 × 70 mm) Advanced pH Meter (850055) Reads either pH (in 0.01 resolution) or mV in large digits, with time, date, and temperature (in °C or °F) shown simultaneously on the lower display. Also indicates stable reading, low battery and displays calibration data. Scroll 99 data points with time stamps and min/max readings directly on the backlit LCD. Features hold, up to 5 point calibration, automatic buffer recognition, manual or automatic temperature compensation, and a USB port. Comes with 4 AAA batteries. Will accept any pH or ORP probe with a BNC connector.

Manufacturer: Extech Brand: Extech Model: 341350A-P

Large LCD built into adjustable "flip-up" cover displays measurement and Temperature simultaneously • Microprocessor based with splash proof housing and front panel tactile touch pad to slope and calibrate • Rugged design for handheld or benchtop use; neckstrap for "hands-free" operation • Memory function stores and recalls 25 labeled readings • Low Battery indicator and Auto Shut off after 10 minutes of non-use • Automatic Temperature Compensation for Conductivity/TDS via thermistor built into conductivity cell • Manual Temperature Compensation for pH (0 to 100��C) • Thermistor probe measures from 32 to 194��F (0 to 90.0��C) • Complete with mini pH electrode, sample buffers, polymer conductivity cell for TDS/Conductivity/Salinity, Thermistor probe, 9V battery, neckstrap and carrying case

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The Hanna Instruments HI 98160 is a waterproof portable pH, oxygen reduction potential (ORP)/mV, and temperature meter with five-point calibration, calibration alerts, a multilevel LCD screen with onscreen tutorial, a polyetherimide (PEI) body pH electrode, a separate stainless steel temperature probe, and stores up to 500 records. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The multilevel backlit LCD screen simultaneously displays the measurement reading, temperature, and tutorial messages. An auto-end mode ensures readings are taken only when they are stable. A good laboratory practice (GLP) key provides access to comprehensive GLP data and log-on-demand holds up to 500 records. Data can be transferred to a computer with the HI 92000 software (not included) using the USB port (cable not included).This meter has up to five-point calibration with eight memorized pH buffers and two custom pH buffers to provide precise calibration range adjustment. An electrode condition graph alerts about electrode status. The unit warns with a graphic signal if readings are outside the calibration range, and can provide a reminder of when calibration is due. The pH electrode has a Bayonet Neill-Concelman (BNC) connector and a 1m (3.3') cable. The separate stainless steel temperature probe also has a 1m (3.3') cable. The meter measures ORP/mV when an ORP sensor (not included) is attached in place of the pH electrode. The meter works with three 1.5V AAA batteries (included) for up to 200 hours of continuous operation without backlighting or up to 50 hours when backlit. An adjustable auto power-off feature turns the meter off after five, ten, 20, or 60 minutes of inactivity to extend battery life and can be disabled for readings that require more time. The HI 98160 portable meter also comes with buffer solution sachets and instructions.Specifications pH range-4.00 to 20.00 pHORP range+ or – 699.9 to + or - 2000mVTemperature ran...

Manufacturer: PCE Instruments Brand: PCE Instruments Model: PCE-PH20S

The PCE-PH20S pH-Meter for soil has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this pH-Meter, it is possible to quickly and accurately measure the pH value of soil or a sample taken from the soil. To do this, simply insert the electrode into loose soil and reed the pH value on the digital display. Please, take into account that the first measurement requires that there is humidity in the soil. The device is always pre- calibrated by the manufacturer. The pH Meter can be constantly recalibrated using the calibration solutions that come with the device. Calibration data remains stored in the device even when the batteries have been changed. Technical Spezification Measurement range: 0.00 to 14.00pH Resolution: 0.01pH Accuracy : ±0.07pH (between 5 and 9pH) ±0.1pH (from 4 to 4.9 and 9.1 to 10pH) ±0.2pH (from 1 to 3.9 and 10 to 13pH) Calibration: automatic, depending on the calibration solution pH value of 4, 7 or 10 Electrode : pH electrode to penetrate the ground surface Power: 4 AAA batteries Operating conditions: 0 to 60ºC /

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Dwyer® Series WPH2 pH Testing Pen accurately monitors pH and temperature levels in a variety of applications. This pocket-sized tester is ideal for pH level measurements in lab environments, industrial plants, or field enviornmental testing. It features an easy to replace electrode and automatically recognizes up to 3 calibration buffer solution ranges. Both pH and temperature, in both English and Metric units, appear on the large dual display. Both the electrode and battery compartment caps are sealed to provide an IP65 weatherproof rating.

Manufacturer: LuckyStone Brand: LuckyStone Model: 88012802

Note:Calibration Solution (pH 4.003 & pH 6.864) are not included &All meter testing qualified befor be shipped.It can directly use, no calibration needs. PH-010 is a high accuracy foldable pH tester for you to test pH level and Temperature of liquids in various industries and applications such as Hydroponics, Aquariums, Swimming Pools, Spas and Food processing etc. PH-010 can also measure Relative Humidity level in the environment. Since pH value varies with temperature, this pH meter is equipped with Automatic Temperature Compensation (ATC), so you don't need to worry about the effect of temperature change on pH level. pH value will be automatically adjusted in temperature between 0 - 50 °C (32 - 122 °F). Specifications * Measuring range: o pH : 0.00 ~ 14.00 pH o Temperature : -5 ~ 50 °C o Relative Humidity : 10% ~ 99% RH * Resolution: o pH : 0.01 pH o Temperature : 0.1 °C o Relative Humidity : 1% RH * Accuracy: o pH : ±0.1 pH o Temperature : ±1 °C o Relative Humidity : ±5% RH * Automatic Temperature Compensation : 0 ~ 50 °C (32 ~ 122 °F) * Operating Temperature : 0 ~ 50 °C (32 ~ 122 °F) * Power: 2 x 1.5 V (AG-13) Button Cell Batteries (included) * Dimensions : approx. 19.5*9.5*4.7cm * Weight : approx. 9.45oz