pH Meters - Page 28

Manufacturer: Bluelab Corporation Limited - Import (NZ) Brand: Bluelab Model: CAREKITPHCON Color: clear

The Blue lab Probe Care Kit contains everything you need to clean, hydrate and calibrate pH probes as well as clean and test conductivity (ppm) probes. Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe. The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it's dirty you can't see out! If the probe face is dirty, it cannot read the solution or soil accurately. A tip. If the conductivity reads low, the probe needs cleaning. pH probes specifically, should be kept wet at all times for optimal performance and life.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35634-10

The Oakton 35634-10 pH Testr 10 is a handheld, waterproof and dustproof meter that floats, if dropped in liquid, and features a replaceable double-junction electrode within its reusable tester body. A portable meter is commonly used to measure the pH of substance such as food, beer, or wine, and is also used to test cleaning water, rinse water, and wastewater, in lab, industrial and food applications. This microprocessor-based meter has Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures, and three-point, push-button calibration with auto-buffer recognition of US and National Institute of Standards and Technology (NIST) standards for a wide range of results. The meter’s waterproof and dustproof housing has an Ingress Protection (IP) 67-rating for protection against solid objects or liquids. It has a large, upright, dual-line LCD screen for ease of viewing, error messages, a hold function which freezes readings for recording, and an auto shut-off that turns the meter off after 8.5 minutes of nonuse to extend the life of the batteries. It has a protective cap to reduce contamination and a double silicone O-ring for ease of electrode module replacement. The 35634-10 tester has an operating temperature from 0 to 50 degrees C (32 to 122 degrees F). pH range - 1.0 to 15.0, resolution 0.1, accuracy + or - 0.1, calibration up to three points with US or NIST buffers at 4.0, 6.86/7.0, or 9.18/10.0. Its dimensions are 6.5 (h) inches x 1.5 (w) (16.8 x 3.8 cm) and it weighs 3.25 ounces. The tester works with four 1.5 V alkaline batteries (not included) for up to 500 hours of continuous use (Eveready A76 or LR44 equivalent replacements). pH testers measure the acidity or alkalinity of a substance. They are commonly used for water testing, and for biological sample analysis in hydroponics, aquaculture and agriculture. Oakton Instruments manufactures an array of scientific instruments for research, industrial, and educational uses. Since 1991, Oakton has distributed a wide variety...

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35634-30

The Oakton 35634-30 pH Testr 30 is a handheld, waterproof and dustproof meter that floats, if dropped in liquid, and features a replaceable double-junction electrode within its reusable tester body. A portable meter is commonly used to measure the pH of substance such as food, beer or wine, and is also used to test cleaning water, rinse water, and wastewater, in chemical, industrial and food applications. This microprocessor-based meter has Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures, and three-point, push-button calibration with auto-buffer recognition of US and National Institute of Standards and Technology (NIST) standards for a wide range of results. The meter’s waterproof and dustproof housing has an Ingress Protection (IP) 67-rating for protection against solid objects or liquids. It has a large, upright, dual-line LCD screen for ease of viewing, error messages, a hold function which freezes readings for recording, and an auto shut-off that turns the meter off after 8.5 minutes of nonuse to extend the life of the batteries. It has a protective cap to reduce contamination and a double silicone O-ring for ease of electrode module replacement. The 35634-30 tester has temperature display from 0 to 50 degrees C (32 to 122 degrees F), and operating temperature of 0 to 50 degrees C (32 to 122 degrees F). pH range -1.00 to 15.00, resolution 0.01, accuracy + or - 0.01, calibration up to three points with US or NIST buffers at 4.0, 6.86/7.0, or 9.18/10.0. It can be used with Tris buffers. Its dimensions are 6.5 (h) x 1.5 (w) inches (16.8 x 3.8 cm) and it weighs 3.25 ounces. The tester works with four 1.5 V alkaline batteries (not included) for up to 500 hours of continuous use (Eveready A76 or LR44 equivalent replacements). pH testers measure the acidity or alkalinity of a substance. They are commonly used for water testing, and for biological sample analysis in hydroponics, aquaculture and agriculture. Oakton Instruments manufactures an array of scientific inst...

Manufacturer: COLE-PARMER Brand: Cole-Parmer

science-lab-ph-meters

Manufacturer: COLE-PARMER Brand: Cole-Parmer

All-in-One" electrodes offer versatility and customization. These electrodes combine the pH reference, pH half-cell, and temperature sensor in one 12mm-diameter electrode body. The seven designs allow you to select between low-maintenance, sealed electrodes or clog-resistant refillable electrodes. Tuff-Tip electrodes feature a semi-domed tip which protects the pH bulb and ensures a quick response in harsh and dirty samples. PBR-style electrodes provide predictable, reliable, and quick responses-no matter what the sample temperature. This design virtually eliminates drift, accuracy problems, and premature performance losses due to temperature. All electrodes include 3-ft cable and connector for pH, except where noted. Save money without giving up temperature compensation! Electrodes designed to work with meters you already have Seven different designs available-find the design that works best for your application without losing automatic temperature compensation

Manufacturer: Extech Brand: Extech Model: PH155

Extech PH155 Replacement module for PH150-C

Manufacturer: PERFECTLY HEALTHY Brand: Perfectly Healthy

pH Plus, 120 cap ( Multi-Pack)

Manufacturer: Scientific Chemical Technologies Brand: ScichemTech Model: LILLIPUT-4

TDS ( Total Dissolved Solids) Tester 0 - 1000 ppm low range, Digital LCD Readout, Water Proof (IP 67), Strongest & Smartest Tester, Elegant & Pleasant, Pocket type, With replaceable Electrode, Accurate & Precise results, Easy calibration, 710 Hours Battery operation(approx), Light in weight 91 gms/ 3.20 oz, Packed in a protective case, Suitable for all the Water related, Educational, Industrial & field applications, Packed with Colourful Attractive Packing, supplied with proper instruction manual

Manufacturer: TrippNT Brand: TrippNT Model: 50006

TrippNT's Small pH Meter Supplies Organizer stores and protects supplies and gives your lab a clean appearance. The two-shelf design has a one inch safety lip that keeps supplies secure. It also has a built in wiper dispenser. Sits on the benchtop and promotes a clean and safe work area. Made of strong PVC material. Measures 12" width by 12" height by 5" depth. 3 pounds.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Cole-Parmer high-performance electrodes are available in a full range of materials, junctions, and sizes to suit your application requirements. New formulation provides additional stability and superior reproducibility over entire pH range. What's Included: 3.3-ft (1-m) cable with a BNC connector. Affordable, high-accuracy pH electrodes for every application The ideal 5-point calibration pH electrode Delivers superior reproducibility in aqueous samples