pH Meters - Page 27

Manufacturer: AMERICAN MARINE INC Brand: American Marine

PINPOINT pH Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot cable with a high interference suppression jacket and Ag-AgCl reference. American Marine PINPOINT pH Replacement Probe 10 foot cord Ag-Ag/Cl reference Extended life High supression cable jacket

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The Hanna Instruments HI 981402-02 is a water-resistant meter for continuous measurement of pH in water treatment applications with manual two-point calibration, a single-line LCD screen, a combination plastic body pH electrode with double junction, and an outer casing with molded eye to hang the meter. A pH meter is commonly used to measure the pH of substances such as water, food, beer, or wine in lab, industrial and food applications. The single line LCD screen of this meter shows the current measurement and has an LED alarm that flashes red when the reading differs from the selected setpoint by more than + or - 0.5 pH. The alarm setpoint range is adjustable from 3 to 11 pH. Front trimmers allow manual calibration at two points. Electrical circuitry is sealed inside the water-resistant housing. The meter has a flat back to prevent rolling when placed on a table and can be wall mounted using the molded eye. The meter is supplied with the HI 1286 double-junction, plastic-body, gel-filled combination pH electrode with a flexible 2m (6.6') cable. The clog-resistant polytetrafluoroethylene (PTFE) junction prolongs probe life and improves accuracy. The Bayonet Neill-Concelman (BNC) connector is protected by a waterproof sleeve. The input impedance is 10 E 12 Ohm and the power supply is 230VAC. The meter also comes with a calibration screwdriver, 12VDC adapter, and instructions SpecificationspH range0.0 to 14.0pH resolution0.1 pHpH accuracy+ or – 0.2Operating temperature0 to 50 degrees C (32 to 122 degrees F)Operating relative humidity100 percentDimensions86 x 110 x 43mm/3.4 x 4.3 x 1.7 inches (H x W x D)Weight150g/5.3oz.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some test...

Manufacturer: American Marine Pinpoint Monitors Brand: American Marine

American Marine is proud to introduce the PINPOINTTM Nitrate Monitor. The only truly affordable and accurate digital Nitrate measurement instrument engineered for marine saltwater. The PINPOINTTM Nitrate Monitor has been designed as a precision spot-testing instrument. There are 2 independent measurement ranges: Low Range is 1-10 ppm nitrate and High Range is 10-100 ppm nitrate. Resolution is 1 ppm in either scale. Accuracy is 1 ppm after calibration. The PINPOINT Nitrate Monitor is sold complete with meter, probe and all calibration fluids (9 volt battery not included). *Please Note: For use with saltwater only.

Manufacturer: YSI Brand: YSI Model: Pro10 Color: Grey

Rugged and reliable, the YSI Pro10 provides everything you need in a handheld instrument for the measurement of either pH or ORP along with temperature. User-replaceable sensors and cables along with convenient calibration routine feature makes it extremely user friendly. Mil-spec (military spec) connectors, IP67 waterproof and rubber over molded case, and 1-meter drop tests ensure the instrument remains in your hands to provide years of sampling even in the harshest field conditions. The feature set of the Pro10 results in a low total cost of ownership over the life of the product and proves that it is smarter, tougher, and more versatile. When ordering the Pro10 you must order the instrument, cable, and pH or ORP sensor separately, allowing you to choose the system that best fits your application. Temperature is part of the cable you order and included in the cable purchase.

Manufacturer: OAKTON Instruments Brand: Oakton Model: 1196L59EA

The pH/RDO 450 meter uses optical measurement technology offering fast response times and long-term stability with minimal maintenance. Plus the automatic temperature compensation (ATC), barometric pressure compensation, and salinity correction further ensure measurement accuracy. The large, backlit LCD lets you view pH, ISE, mV, % saturation, or mg/L (ppm) simultaneously with temperature. Rugged, IP67-rated waterproof housing makes the meter ideal for plant or field testing. Additional features include ready (stability) indicator, smart averaging, hold function, calibration alarm, and battery-life indicator. Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cable for USB and RS-232 connectivity. Meter Kit includes Meter, "All-in-One" pH probe 35808-71, RDO probe 35640-53, sensor cap, RDO weight, calibration tube, calibration solutions, two AA batteries, and hard carrying case.

Manufacturer: HM Digital Brand: HM Digital

A handheld and portable pH tester that is perfect for both consumer or commercial use.Ideal for all pH testing, water purification applications, wastewater regulation, aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment, wine, coffee, agriculture and more.SPECIFICATIONS:* pH Range: 0 - 14* Temperature Range: 0-80 °C; 32-176 °F* Resolution: 0.01 pH; Temperature resolution is 0.1 °C/F* Accuracy: +/- 0.02 pH* Calibration: Digital calibration by push button* Electrode: Replaceable glass sensor and reference tube electrodes* Housing: Waterproof (submersible; floats)* Power source: 3 x 1.5V button cell batteries (included)* Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)* Weight without case: 96.4 g (3.4 oz)Includes a cap, batteries, and lanyard

Manufacturer: The Hillman Group Brand: The Hillman Group Model: 560671

These self-drilling screws are used in wood, fiberglass and metal and they possess a drill point enabling it to drill in its own hole in thin gauge steel. The sharp threads create their own mating thread when drilled into the material. No pre-drilled pilot holes necessary.

Manufacturer: COLE-PARMER Brand: Oakton

What's included: All-in-One single-junction pH/ATC electrode 35808-71, Grip-Clip electrode holder, and two AA batteries. Rugged, accurate, reliable - Best value for an IP67-rated waterproof meter! Intuitive, user-friendly icons-electrode status displays pH slope Grip-ClipTM holder quickly and easily secures the electrode to your beaker or container Expanded data logging for up to 150 data sets mV offset for calibration of ORP standards, zeroing mV value, and pH diagnostics 700 hours battery-life or optional universal power adapter Built-in stand and wall mount option allow for easy benchtop measurement or storage

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Standard models are available with a 10- or 25-ft cable with BNC connections. Preamplified models put an end to problems associated with high impedance signals-ideal for environments with high electrical noise or high humidity. Order replacement batteries for preamplified models separately. Connect these electrodes to standard pH or ORP meters to send a signal up to 1000 ft without an external power supply. Order industrial housings seperately. High-pH, double-junction electrodes are well suited for pH levels above 13 or high sodium ion concentrations. Double-junction reference protects against contamination from heavy metals, organics, and sulfides. Maximum pressure is 150 psi at 25°>C. Note: 100Ω RTD ATC elements are platinum and conform to DIN curve 43760. ATC connector is miniature audio plug. Connector for the 1 kΩ RTD and the 3 kΩ Balco ATC elements is a spade lug. Connector for 100 kΩ thermistor ATC elements is a standard 1/4" phone plug. Use for many applications in a variety of housings Preamplified version allows for long cable runs

Manufacturer: Bluelab Corporation Limited - Import (NZ) Brand: Bluelab Model: PROBPH

The Blue lab pH Probe is a replacement pH probe suitable for use with Blue lab products that test the pH value of a solution. Unfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life. The Blue lab pH Probe has a Double Junction Reference which provides a longer life than many other pH probes and is a gel filled non-refillable probe, so apart from cleaning is maintenance free. Replace only the pH probe, not the whole meter.