Digital Thermometers - Page 42

Manufacturer: Testo AG Brand: Testo Model: 0602 2292

Manufacturer: Control Company Brand: Control Company

Control Company A/C Adaptor for 4000 - CONTR

Manufacturer: Ideal Industries Brand: Ideal Industries Model: 61-685

The Ideal 61-685 infrared thermometer features point-and-shoot temperature measurements and a laser pointer indicates the center of the measurement area. The thermometer features a 12:1 field of view and selectable emissivity for the highest accuracy. Also features programmable high and low alarms and supports K-type thermocouples. Ideal Industries was started in 1916 by J. Walter Becker. His belief that every product should be worth more than the price paid for it has been the core IDEAL business principle for over 90 years. Today, the many loyal distributors and customers that make IDEAL successful are a testament to Becker's original philosophy.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4426

Accurately monitor temperatures in freezers, refrigerators, incubators, and environmental chambers with this temperature-buffered sensor. Bottle and solution insulate sensor from rapid changes, as an example, when a refrigerator door is opened. Solution mimics exact temperature of samples. Stainless-steel sensor/probe assures long product life. Entire unit is waterproof. Easy-to-read digital display shows high, low, and current temperatures. MIN/MAX monitors high/low readings overnight, on weekends, or for any time period-a significant advantage over impossible to read glass thermometers displaying only the current temperature. The entire unit including bottle and display may be placed in any environment within the operating temperature range of -22 to 122 degree F. The resolution is 0.1 degree . Accuracy is +/-1.0 degree C. Ultra model accuracy is +/-0.4 degree C at tested points. Chemical-resistant ABS plastic holder stands on a shelf or holder side affixes to a refrigerator wall or any wall. Supplied with double back tape and Velcro for attaching holder side to any surface. Bottle may be removed from holder. Solid-state probe eliminates the difficulty encountered with mercury thermometer contamination. Probe is sealed in a miniature bottle filled with nontoxic glycol. Solution is GRAS (generally recognized as safe) by the FDA (Food and Drug Administration). It eliminates concerns about incidental contact with food or drinking water. (Also available with glass bead fill.) To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied complete with holder, double back tape, Velcro, and replaceable silver-oxide battery. Unit size is 1-7/8" x 1" x 4-5/8", Holder measures 2.25" length by 2.25" width by 1-1/8" depth. Weight is 3-2/3 ounces.

Manufacturer: Thermco Brand: THERMCO

The Temp-Check thermometer determines the temperature of small bags or containers in seconds. Designed for hospital or laboratory use, it measures the temperature of plasma, red blood cells, cryo precipitate or other materials that are placed on the sensing pad. This non-invasive instrument allows personnel to determine if blood or plasma is at the right temperature for transfusion, or if it is sate to return to stock at the blood bank. The Temp-Check thermometer uses a fast acting Type K thermocouple within an insulated pad to measure a temperature range of 0°C to +40°C with an accuracy of +/-1°C. The unit is extremely simple to operate. Just plug it into any standard 120v electrical outlet and place the item to be checked on the center of the sensing pad. Readout response is rapid, typically within 10 seconds. For easy portability, this unit includes a built-in NiMH battery with a trickle charger. When the battery is fully charged, it will run for about 12 hours. Press the button to the left of the display and the display will stay on for two minutes and then shut off to conserve power. The battery will recharge when the unit is connected to line power.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35626-60

General purpose probe for Temp 6 meter; 316 SS with 3 ft cable. Temp. Range: -58° to 302° F-50° to 150° C Oakton #: WD-35626-60

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 800072

Type K surface magnetic probe for digital thermocouple thermometers.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: MFM300-KIT1

Lighten your load and increase your capabilities by using the MFM300. The MFM300 has te ability to measure, calculate and display the following: Temperature - 3 zones, Delta T, Min, Max and Average; Pressure; Superheat and Sub-cooling; Psychrometrics; Air Flow; Data Logging and is Upgradeable. The MFM300 is designed as a modular, upgradeable and expandable system allowing the user to add as needed; probes; features and capabilities.

Manufacturer: TAYLOR Brand: taylor

' Digital Thermometer, Indoor/Outdoor, Wall, -20 Degrees to 120 Degrees Temp. Range (F), -29 Degrees to 50 Degrees Temp. Range (C), Digit Size 3/4 In., Celsius Switchable Yes, Cord Length 9 ft. 9 In., Battery Type AA, +/-1.8 Degrees Temp. Accuracy (F), +/-1 Degrees Temp. Accuracy (C), Memory Min/Max, Display Type LCD, Height 6-7/8 In., Width 3-3/16 In., Depth 1-1/8 In. '

Manufacturer: Thermco Brand: THERMCO

Thermco's Triple Display Digital Thermometer simultaneously shows the current, minimum, and maximum temperatures and updates continuously. An audible & visual alarm will trigger when the temperatures goes above or below the set temperatures. The minimum/maximum feature monitors critical temperature for any period of time, such as overnight or weekends. To comply with regulatory agencies requirements Thermco's Time-Stamp thermometer provides the date and time when the temperature being monitored exceeds the minimum and maximum settings and in real-time. Also an audible alarm will sound and flashing LED will be visible. Each thermometer is certified, serialized and traceable to NIST in Thermco's ISO17025, (Accreditation No. 69071) Calibration Laboratory and accredited by Ilac-MRA to assure accuracy and compliance with regulatory agencies. The thermometer probe is housed in an unbreakable plastic vial filled with a Bio-Safe buffering media which maintains the thermometer reading while the refrigerator or freezer door is open. Thermometers are supplied with dual magnets and velcro sets to allow attachment to walls or doors. Other features include flip out desk stand and wall mounting key hole in back of unit, and supplied with AAA alkaline batteries.