Digital Thermometers - Page 35

Manufacturer: Testo AG Brand: Testo Model: 0563 2700

The Testo 0563 2700 cooking oil tester is a digital thermometer and TPM sensor for monitoring the temperature and aging of deep-frying oils in restaurant and food service environments. It measures temperature from 104 to 392 degrees F (40 to 200 degrees C) with an accuracy of + or - 2.7 degrees F (+ or - 1.5 degrees C). It has a capacitive sensor in the stem that measures percent total polar materials (TPM) from 0.5 to 40%TPM to indicate whether aged deep-frying oil must be changed to preserve quality. A visible 3-color bar on the LCD and an audible alarm indicate when TPM limit values are being approached or exceeded to help optimize cooking oil use. The sensor is embedded in a metal housing to help protect it from damage. The removable waterproof housing helps protect the internal electronics from grease and water. The dishwasher-safe housing and hand strap can be removed for cleaning. The automatic data hold feature records the %TPM reading for later review and recording. The tester accommodates back-to-back sequential measurements for quick testing of multiple oil containers. The unit operates on two AAA batteries and turns off automatically after a period of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. When the housing is in place, this thermometer is Ingress Protection certified IP65 for dust and penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with a protective housing, hand strap, reference oil for calibration, batteries, storage case, and instructions.SpecificationsTemperature range104 to 392 degrees F (40 to 200 degrees C)Display resolution (temperature)0.5 degrees F (0.5 degrees C)Accuracy+ or - 2.7 degrees F (+ or - 1.5 degrees C)TPM percentage range0.5 to 40%Display resolution (TPM)0.5%Response time (TPM)

Manufacturer: Control Company

Manufacturer: Anaheim Scientific Brand: Anaheim Scientific Model: H240

The Anaheim Scientific H240 four-channel digital thermometer with data logging feature and K-type thermocouple probes is for use in applications requiring a broad range of temperature measurements, including manufacturing, agricultural, laboratory, and heating, ventilation, and air conditioning applications. The thermometer accepts thermocouple K-type probes, which have a broader temperature measurement range than a thermistor sensor but provide lower accuracy, J-type probes, which have a narrower temperature measurement range than a K-type probe but provide higher accuracy, and platinum resistor probes (Pt 100 ohm), which provide more accurate and stable readings than a thermocouple probe but have a narrower temperature measurement range and slower response time. When using a K-type thermocouple, it measures temperature from -199 to 1370 degrees C (-199 to 2498 degrees F). When using a J-type thermocouple, it measures temperature from -199 to 1210 degrees C (-199 to 2210 degrees F). With K- and J-type thermocouples, it has an accuracy of + or - 0.5% of the reading plus 1 degree C (1.8 degrees F). When using a platinum resistor probe, it measure temperature from -199 to 850 degrees C (-199 to 1000 degrees F) with an accuracy of + or - 0.4% of the reading plus 1.2 degrees C (2 degrees F). This four-channel thermometer has four inputs for connecting temperature probes (four K-type thermocouples are included), allowing the operator to measure the temperature of up to four samples at one time. The LCD screen can display the current temperature measurement for an input channel, the highest or lowest temperature reading for a session, and the difference between two channels. The data logging feature allows the operator to manually or automatically record readings for future recall. An RS-232 port on the thermometer allows data to be transferred to a computer for further analysis (cable not included). The operator can choose to display readings in degrees Fahrenheit or Celsius. The hold function keeps a measurement on t...

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: 1197X39EA

The HI145-00 T-Shaped Thermometer is used to monitor temperature in semi-frozen and semi-solid food and liquids. The thermometer measures temperature from -50 to 220 degrees C, with an accuracy of + or - 0.3 degrees C. The 125mm/5" long AISI 316 stainless steel probe has a penetration tip for use in solids. The automatic internal calibration feature increases the accuracy of test readings. The thermometer has a T-shaped handle for use in applications that require force for thermometer insertion. The HI145-00 is used to measure temperature in laboratories, food service, and food storage.SpecificationsPower source(1) AAA batteryTemperature range-50 to 220 degrees CTemperature accuracy+ or - 0.3 degrees C from -20 to 90 C; + or - 0.4% outside this rangeTemperature resolution0.1 degree C (-50 to 199.9 degrees C), 1 degree C outside this rangeWeight65g/2.3oz.Dimensions (H x W x D)165 x 92 x 38mmH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 s...

Manufacturer: Sinometer Brand: Sinometer Model: VC97 Color: VC97

The Sinometer VC97 is a True RMS professional fully featured digital multimeter as well as a thermometer. This is an auto raging meter that will give reading when you plug it in at any times. This is a 3 3/4 digits meter that reads 3999, this gives you much higher accuracy than a meter with a reading at 1999 only. The back light on the LCD gives you convenience in a dark, and auto power off saves the battery in a long run. It comes with a pair of test leads and a set of thermocouples, it works on a 9 V battery, a test battery is included. You can use it to measure AC/DC voltage and current, resistance, capacitance, frequency and temperature both in Fahrenheit and Celsius. This meter comes with all the accessories and 1 year manufacturer's warranty. 　 Specifications: DCV:0-400m-4-40-400-(±0.5%)-1kV(±1.0%) ACV:0--400mV(±1.5%)-4-40-400V(±0.8%)-750V±1.5% DCA:0-400uA-4000uA-40m(±1.2%)-10A(±2.0%) ACA(True RMS):0-400uA-4000uA-40mA-400mA(±1.5%)-10A(±2.0%) Resistance: :0-400-4k-40k-400k-4M(±0.8%)-40M(±1.2%)ohm CAP:0-20nF-100nF-10uF-100uF(±3.5%)1mF/10mF/100mF (±5.0%) Frequency: 0-100Hz-1000Hz-10KHz-1MHz-30MHz(±0.5%) Temperature: C: -40 ºC - 1000ºC Transistor and Diode test Audible continuity:< 70 ohm Accessories: *A pair of test leads * 9V battery         *K-Type Thermo probe and a Capacitance adapter          *User manual ( Details see the manual book)

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: ACC330DIG

Thermco's digital thermometer product line offers instruments of the highest accuracy with resolution of 0.001° to digital thermometers for general purposes. Each thermometer is manufactured to exacting standards, calibrated, and are provided with a certificate traceable to N.I.S.T.

Manufacturer: Miljoco Corporation Brand: Miljoco Model: CD2066

The Miljoco CD20668403-48 digital thermometer with solar-powered display U-clamp connection installs in a panel for monitoring temperature in applications involving refrigeration equipment, chilled systems, spas, and control panels. It measures temperature from -50 to 70 degrees C (-58 to 158 degrees F), with an accuracy of + or - 1 degree C (2 degrees F). The LCD screen is powered by solar energy in light levels greater than 100 lux and switches to battery power when light levels drop below 100 lux. The operator can choose to display readings in degrees Fahrenheit or Celsius. The sensor is made from nickel-plated brass and measures 0.225" in diameter, and it has a 48" flexible black polyvinyl chloride (PVC)-covered lead for accessing hard-to-reach areas. The thermometer body is made from stainless steel, which resists wear, and it has a threaded acrylic lens. It is designed for use with panels with a maximum thickness of 0.31".SpecificationsTemperature measurement range-50 to 70 degrees C (-58 to 158 degrees F)Accuracy+ or - 1 degree C (2 degrees F)Resolution0.1 degree C or FUpdate rate10 secondsOperating temperature measurement range-40 to 60 degrees C (-10 to 140 degrees F)Dimensions*2.17 x 1.05 in. (OD x D)*OD is the outside diameter, or the distance around the circumference of a circle; D is depth, the horizontal distance from front to back. Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices a...

Manufacturer: Mastech Brand: Mastech Model: MS6520B

Features:Distance to spot: 10:1Built-in laser pointer to target spotEmissivity: 0.950.1 Degree Fahrenhei/Centigrade MAX resolutionBack light and low battery indicatorPls note that battery is not included in the packagePackage includes:1 * MS6520B Infrared Thermometer1 * User manual

Manufacturer: Bel-Art Brand: SP Scienceware Model: B61000-0400

The H-B Instrument Frio-Temp Supreme verification thermometer is used for verifying temperatures in freezers, refrigerators, and incubators in laboratories and food service systems. The thermometer measures temperature from -50 to 70 degrees C (-58 to 158 degrees F) with the included bottle probe and 0 to 50 degrees C (32 to 122 degrees F) without the probe. The measurement accuracy is + or - 1 degree C. The 10mL plastic bottle probe is attached to the unit by a 3m/9.8 feet waterproof cable. The unit has a minimum/maximum temperature memory for monitoring consistency of measurements and a user-selectable audible alarm. This thermometer is traceable to National Institute of Standards and Technology, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. The Frio-Temp Ace thermometer is used by scientists and food-service workers. Specifications Power supply (1) AAA battery Temperature range with probe -50 to 70 degree C (-58 to 158 degrees F) Temperature range without probe 0 to 50 degrees C (32 to 122 degrees F) Accuracy + or - 1 degree C Standard met International Organization for Standardization (ISO) 17025 Probe size 10mL plastic Cable length 3m/5.8 ft. Dimensions, base unit (H x W) 64 x 95mm/2.5 x 3.7 inches Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals. H-B Instrument Company manufactures time, temperature, density, and weather...

Manufacturer: Industrial Grade Brand: Industrial Grade

Remote Mount Thermometer, Vapor Actuated, Display Analog, Temp. Range 30 to 240 F, Mounting Front Flanged With Back Outlet, Dial Size 3.5 In., Accuracy +/-1 Scale Division, Line Length 60 In., Line Length 5 Ft., Sensor Dimension 7/16 In., Power Source Vapor, Case Material Stainless Steel, Tube Material Bronzed Braided Copper, Lens Material Acrylic