Digital Thermometers - Page 16

Manufacturer: Testo Brand: Testo Model: 0563 1080

Testo 108, Food Service Thermometer With Standard Immersion/Penetration Probe, Type K Thermocouple, Soft Case, Probe And Instrument Protection Class Ip 67 including Batteries

Manufacturer: Thomas Scientific Brand: Thomas

Use this thermometer anywhere. Constructed of shock-resistant ABS plastic. Water-resistant case is sealed with an O-ring gasket to stop dirt, dust, fumes, and water. Perfect for use in lab or plant’s worst environment. Splash-proof soft pouch (with shoulder strap) protects unit and provides handy storage for probe. Reads both degree F and degree C on a jumbo, 3/4" high LCD. Range is -58 to 500 degree F and -50 to 260 degree C. Resolution is 0.1 degree and accuracy is +/-1.0 degree C or 1 percent of reading. Thermometer monitors temperature continuously for 3 years and features a selectable display update rate of 1 second or 10 seconds. A high and low alarm may be programmed in 1 degree increments. When temperature rises above or falls below the set points, a 1-minute audible alarm signals an out-of-range condition, and a symbol flashes on the LCD. The alarm mode may be switched off for use as a non-alarm thermometer. At the touch of a button, memory recalls highest and lowest temperature readings over any time period. Countdown timer: Countdown timer function may be programmed in 1-minute increments from 99 hours 59 minutes (display shows hours, minutes, and seconds remaining). Unit sounds alarm when zero is reached. Accuracy is 0.01 percent. Traceable to NIST for accuracy: To assure accuracy individually serial-numbered Traceable Certificates for time and temperature are provided from our ISO 17025 calibration laboratory accredited by A2LA. They indicate traceability to standards provided by NIST (National Institute of Standards and Technology). Total package: Supplied with Traceable Certificates, probe, soft pouch, and two AAA alkaline batteries. Triple-purpose, stainless-steel probe (liquids, air/gas, and semisolids) dimensions: 0.14" diameter, 4-1/4" stem length, 8" overall length. Cable length is 4 feet. Unit measures 2-1/2" width by 6-1/2" height by 1" thick and weight is 8 ounces.

Manufacturer: Thermo Manufacturing Brand: Thermo Manufacturing Model: 44008

PRODUCT DESCRIPTION: Thermo-Thimbles - The pro way to run A/C line sets, electrical and thermostat wires through walls! Add a professional look to through-the-wall installations! -- OTHER PRODUCT FEATURES: Flange pre-marked for nails or screws; Unit offers custom, professional look; No snagged line sets

Manufacturer: Bside Brand: BSIDE

It is a portable digital thermometer.It has stable performance, high precision,low power consumption, novel structure. safe and reliable, it's an ideal measuring instrument for the majority of users. Features: Can match any standard type K sensor. Fitted with standard K probe socket. LCD display allows clear read out even at bright places. LCD display provides low power consumption. LSI-circuit use provides high reliability and durability. High accuracy and wide measurement range. Compact, lightweight, and excellent operation. Circuit used high quality multi turns VR for keeping high accuracy and reliability. Specifications: Measurement Range: -50° C to 750° C; -58° F to 1382° F Sensor Type: K type thermocouple Resolution: 0.1° C/1° C or 1° F Accuracy: ±1(% of reading + 2° C) How to use this thermometer: 1. K type thermocouple is inserted into the thermocouple jack 2.The sliding switch sliding to ° C or ° F 3.The thermocouple probe in contact with the measured object 4.Then read the results from the display 5.If the display value is less than 200, you can choose to display the 0.1 range resolution by pressing the "range" key

Manufacturer: Taylor Instruments Brand: Taylor Instruments

Taylor Dishwasher Thermometer Test Strip - 24 per pack. These Taylor Precision 8750 single-use, adhesive thermometer test strips are used to test the temperature of your dishwasher. FDA approved and meets the 180 degrees Fahrenheit minimum required temperature for washed dishes and are accurate to +/-2 degrees Fahrenheit. Theyre easy to use, respond quickly with high color contrast change to verify that proper sanitizing temperature is reached.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-TI-SBP

FLUKE FLK-TI-SBP ISI THERMAL IMAGER

Manufacturer: RPI, Corp. Brand: RPI

High accuracy dual channel thermometers feature 0.01°: high resolution with accuracy of ±:0.30°:C. Individual channels provide simultaneous monitoring of temperatures in separate locations. Display exact time and date when a min/max reading occurred and alarm sounded. Min/Max temperatures are programmable in 0.1°:C increments over entire range of -50°: up to +70°:C. Temperature buffered solution probes contain a non-hazardous glycol mixture that eliminates rapid temperature changes when opening refrigerator or freezer door. Available with two miniature size sensors that are chemical resistance and waterproof for use in water baths, incubators or dry block heaters. Supplied with Traceable Calibration Certificate (NIST), stand, mounting strips and battery.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4483

The Thomas 4483 infrared thermometer with built-in laser pointer is for measuring surface temperature in a range of commercial and industrial applications. The thermometer measures temperature from -50 to 1000 degrees C (-58 to 1832 degrees F), with an accuracy of + or - 1.5 degree C. The infrared sensor measures surface temperature at a distance for applications involving hard-to-reach, moving, hot, or electrified equipment. It has a 50:1 distance-to-spot ratio, which means the measurement field measures approximately 50 feet in diameter when the target is 1 foot away. A built-in laser pointer helps improve aiming accuracy when taking infrared measurements. The operator can choose to display readings in degrees Fahrenheit or Celsius. The backlit LCD screen is readable in low light. As long as the trigger is held down, the thermometer will continue to take temperature readings. When the trigger is released, the most current reading stays on the screen for seven seconds. The thermometer operates on one 9V battery (included). An individually numbered certificate indicating traceability to standards provided by the National Institute of Standards and Technology (NIST) is included from an International Standards Organization (ISO) 17025 accredited calibration laboratory.SpecificationsTemperature measurement range-50 to 1000 degrees C (-58 to 1832 degrees F)Accuracy+ or - 1.5 degree CResolution0.1 degree C from -9.99 to 199.9 degrees C, 1 degree C otherwiseDistance-to-spot ratio50:1Emissivity0.95, fixedPower supply9V battery (one, included)Weight10 oz.Dimensions*9 x 4 x 2.25 in. (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called...

Manufacturer: O.E.M. Brand: Unknown

KITCHEN THERMOMETERS

Manufacturer: Hubert Brand: Hubert

This waterproof digital thermometer comes with an anti-microbial case and sleeve to prevent bacteria. The Hubert® device is 7" overall with an easy to clean 3" stainless steel stem. This waterproof digital thermometer reads the temperature in less than five seconds with an accuracy of ±0.5°F. The Hubert® device includes a battery. This waterproof digital thermometer displays temperatures in a range of -40° to 450°F (-40° to 230°)