NY Brew Supply Stainless Wort Chiller with Garden Hose Fittings, 1/2" x 50', Silver

Manufacturer: NY Brew Supply Brand: NY Brew Supply Model: AZ-W3825-CV Color: Copper

This immersion worth chiller is designed for 5 gallon batches and will cool your worth in minutes! It's made from 25 feet of 3/8 inch OD copper tubing. 3/8 inch copper tubing provides the most efficient water-flow through the chiller.

Brand: U.S.A. CHILLER Color: Copper

Great for 5 gallon batches! Quickly cool your wort with this 25' copper immersion wort chiller (3/8" outside diameter tubing) Made in the USA. Comes with brass hose connector directly attached, easily connect your garden hose.

Manufacturer: E.C. Kraus Brand: E.C. Kraus Color: Multicolor

Cool Your Beer Wort From Boiling To Room Temperature In Just A Few Short Minutes. Cooling Your Wort Down Faster Not Only Saves Time, It Allows Less Time For Your Beer To Become Infected And Oxidized From Excessive Air Exposure. Run Cold Tap Water Through The Copper Tubing While The Wort Chiller Is Submerged In Your Wort. Heat Quickly Transfers From The Wort To The Flowing Water Within The Copper Tubing And Runs Back To Your Sinks Drain. Copper Tubing Is 20 Feet In Length. Perfect Size For Cooling 5 Or 10 Gallons Of Beer. Comes With Two Lengths Of 3/8' Id Vinyl Hose To Reach Back And Forth From The Brew Pot To The Sink. Each Hose Is 3 Feet In Length. Also Has A Brass, Garden Hose Fitting To Thread Onto A Laundry Sink Faucet Or Outside Faucet. See Faucet Adapter Below For Attaching To Most American Kitchen Faucets.

Manufacturer: NY Brew Supply Brand: NY Brew Supply Model: W1420-CV Color: Copper

This immersion chiller is designed for smaller batches up to 5 gallons, and great for those new to home brewing. This wort chiller offers advantages over other economical chillers. Plenty of vinyl tubing is included along with a nylon garden hose adapter and detailed instruction sheet. A stainless steel clamp solidifies the structure of the chiller, and allows for adjustability of the coil spacing and height.* This product is proudly made in the USA. Made from 1/4" OD copper tubing

Brand: Konflic Model: ABBT17WBK-S Color: White/Black

This Legend Angel Marilyn Monroe Raglan 3/4 Sleeve For Men's T-shirt is designed by our brand new arrival. This Raglan-style 3/4 t-shirt will be your daily ordinary causal look. Pair with your favorite jeans and sneakers!  

Brand: CentralBrewShop Color: Bronze

An immersion chiller will allow for rapid cooling of hot wort to yeast pitching temperatures. This chiller is 25 feet of 3/8" copper tubing and includes the screw clamps vinyl tubing and garden hose fitting for quick and easy set up. This is a great chiller at a great price! Compression fittings and tubing that is screw clamped in place tend to expand and contract with the drastic temperature fluctuations during the boiling and cooling processes. This expansion and contraction will loosen the compression fittings and cause you to leak unsanitized cooling water into the wort. You just worked hard to make your wort, you don't want to contaminate because of a loose fitting. To insure that your copper coils never contaminate your wort we now offer soldered fittings that are solid and secure. Soldered fittings will never leak. Also with metal garden hose fittings soldered in place to prevent hose bursting and eliminate leaking. The standard listing for this product comes with the vinyl tubing and screw clamps. If ...

Brand: Coldbreak Brewing Color: Copper

This wort chiller is composed of a 50ft x 3/8in OD copper tube for cooling up to 5 gallons in about 10 minutes or 10 gallons in about 20 minutes. It includes 6 feet of vinyl tubing on both ends, hardware and clamps to connect to a standard garden hose thread (3/4in GHT). A kitchen sink faucet adapter is also available in our store. Benefits Of Using A Wort Chiller: - Minimize the time the wort is exposed to contaminating organisms- Reduce oxidation which is accelerated at higher temperatures- Prevent off-flavors from developing- Preserve the delicate aromas and flavors of the beer - Prevent finishing hops or herbs from being overcooked Dimensions: Overall Height: 13.9in (35.2cm) Overall Width: 9in (22.9cm) Coil Height: 8.0 in (20.3cm) Coil Tubing Length: 50ft (15.2m) Coil Tubing Diameter: 0.38in or 3/8in OD (9.5mm) Vinyl Tubing Inner Diameter (both): 0.38in or 3/8in ID (9.6mm) Vinyl Tubing Length: 6ft (1.8m) Faucet Coupling Thread: 3/4 GHT (U.S. Garden Hose Thread) Actual Garden Hose Fitting Insid...

Manufacturer: Duda Diesel

"Dimensions L: 7.5"" W: 2.9"" Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate) Thickness of plates 0.3 mm (.0118"") Max Flow Rate 66.6 L/min (17.6 gpm) Channel Capacities 0.018L/channel (.004756 gal/channel) Design pressure 1.0 Mpa (145 psi) Test Pressure 2.0 Mpa (290 psi) Design Temperature -195°C to +220°C (-319°F to 430°F) Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour) Flow direction F1-F3 and F2-F4 (see diag above) Welding Material 99.9% Copper Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water. Manufacture Material Stainless Steel 304 Appl...

Manufacturer: Brazetek Brand: Brazetek Color: stainless

Compact Brazed Plate Heat Exchanger - great for Solar heating, SVO / WVO oil-preheating applications for trucks, cars and boats, Beer and Wort Chilling, and many other heating and cooling applications. Unit Dimensions: 3"x8" - 16 plates - 316L Stainless Steel - Copper Brazed - 3/4" MNPT Ports - Flow Rate: 15 GPM max - Design pressure 435 psi