An immersion chiller will allow for rapid cooling of hot wort to yeast pitching temperatures. This chiller is 25 feet of 3/8" copper tubing and includes the screw clamps vinyl tubing and garden hose fitting for quick and easy set up. This is a great chiller at a great price! Compression fittings and tubing that is screw clamped in place tend to expand and contract with the drastic temperature fluctuations during the boiling and cooling processes. This expansion and contraction will loosen the compression fittings and cause you to leak unsanitized cooling water into the wort. You just worked hard to make your wort, you don't want to contaminate because of a loose fitting. To insure that your copper coils never contaminate your wort we now offer soldered fittings that are solid and secure. Soldered fittings will never leak. Also with metal garden hose fittings soldered in place to prevent hose bursting and eliminate leaking. The standard listing for this product comes with the vinyl tubing and screw clamps. If you wish to upgrade to the soldered fittings, please make sure to inform CentralBrewShop in the order form & we'll upgrade you free of charge. Approximate dimensions: 15" h x 9" w. This product is made in the USA!
25' Immersion Wort Chiller
Made From 100% Copper
Made In The USA
3/8" Copper Tubings
Indicate In the Order Form Whether You Want Sealed or Garden Hose Fittings
Product Information Specifications for 25' Immersion Wort Chiller with Tubing and Garden Hose or Sealed Fittings Below:
This wort chiller is composed of a 50ft x 3/8in OD copper tube for cooling up to 5 gallons in about 10 minutes or 10 gallons in about 20 minutes. It includes 6 feet of vinyl tubing on both ends, hardware and clamps to connect to a standard garden hose thread (3/4in GHT). A kitchen sink faucet adapter is also available in our store. Benefits Of Using A Wort Chiller: - Minimize the time the wort is exposed to contaminating organisms- Reduce oxidation which is accelerated at higher temperatures- Prevent off-flavors from developing- Preserve the delicate aromas and flavors of the beer - Prevent finishing hops or herbs from being overcooked Dimensions: Overall Height: 13.9in (35.2cm) Overall Width: 9in (22.9cm) Coil Height: 8.0 in (20.3cm) Coil Tubing Length: 50ft (15.2m) Coil Tubing Diameter: 0.38in or 3/8in OD (9.5mm) Vinyl Tubing Inner Diameter (both): 0.38in or 3/8in ID (9.6mm) Vinyl Tubing Length: 6ft (1.8m) Faucet Coupling Thread: 3/4 GHT (U.S. Garden Hose Thread) Actual Garden Hose Fitting Insid...
"Dimensions L: 7.5"" W: 2.9"" Heat Transfer Area/Plate 0.012 mÂ²/plate (.14 ftÂ²/plate) Thickness of plates 0.3 mm (.0118"") Max Flow Rate 66.6 L/min (17.6 gpm) Channel Capacities 0.018L/channel (.004756 gal/channel) Design pressure 1.0 Mpa (145 psi) Test Pressure 2.0 Mpa (290 psi) Design Temperature -195Â°C to +220Â°C (-319Â°F to 430Â°F) Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour) Flow direction F1-F3 and F2-F4 (see diag above) Welding Material 99.9% Copper Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water. Manufacture Material Stainless Steel 304 Appl...
Compact Brazed Plate Heat Exchanger - great for Solar heating, SVO / WVO oil-preheating applications for trucks, cars and boats, Beer and Wort Chilling, and many other heating and cooling applications. Unit Dimensions: 3"x8" - 16 plates - 316L Stainless Steel - Copper Brazed - 3/4" MNPT Ports - Flow Rate: 15 GPM max - Design pressure 435 psi
HomeBrewStuff Chill Out Copper 8" X 20 Plate Beer Wort Chiller and Back flush Cleaning Attachment (Extra Valve and Thermometer Upgrade)
Manufacturer: Home Brew Stuff
Brand: Home Brew Stuff
Homebrew Stuff Chill Out Copper Plate Chiller This compact and economical plate chiller is very effective at rapidly reducing worth to pitching temperatures. Plate chillers are more efficient than both immersion chillers and other counter-flow designs. Save water and time while chilling your worth. Reach pitching temp in record time and reduce the chance of contamination or oxidation in your home brew. Made of 30 - 304 stainless steel plates that have been brazed together with 99.9% pure copper in an oxygen-free furnace. Lowers dimethyl levels. Greatly reduces bacteria. While this chiller can be gravity fed, a pump, like our Line of Chugger pumps, can help control flow rates through the chiller and allow for more mounting options. It is strongly recommend purchasing the optional back flush assembly for use in cleaning this chiller, We have included a back flush attachment!!!Easy to use, just attach a garden hose directly to the chiller and reverse flush the worth out. Worth Inlet/Outlet: 1/2" MPT Water ...
This 25' stainless steel immersion wort chiller makes cooling your beer wort fast and easy. Just connect one line to your hose and place the other line in a drain. Then place the serpent style immersion wort chiller in your beer wort. Now you're ready to turn on your cold water. Wort is cooled by running cold water through the coils. The 3/8" OD of the stainless steel tubing allows for a high flow rate, cooling your wort fast and efficiently. Food Grade 304ss is a more stable material than copper and does not corrode or contaminate your wort. 304ss is also easier to clean and maintain than copper. This kit contains all the parts you need to get started immediately. The serpent style immersion wort chiller is much simpler to operate than a counterflow wort chiller. Includes: 3/8" 25' stainless steel serpent style coil, cut-to-fit vinyl tubing, three house clamps, and garden hose adapter.
Manufacturer: NY Brew Supply
Brand: NY Brew Supply
This super efficient immersion chiller is recommended for 5 to 15 gallon batches, and is made from 50 feet of 3/8 inch O.D. copper tubing that will easily cool your wort in minutes! With twice the copper of our standard 3/8 inch chiller, this unit provides faster cooling for larger batches. Vinyl Tubing and Garden Hose Adapter Included 12 feet of vinyl tubing allows you to chill your wort directly from the stove! This tubing comes shipped in one continuous piece allowing you to cut it to the desired length for your input & output hoses. High quality brass hose adapter are also included.
Manufacturer: Duda Energy
Brand: Duda Energy
Copper Brazed Stainless Steel Plate Beer Wort Chillers The Most Efficient Wort Chillers by Duda Energy Plate heat exchangers are the most efficient and economical heat exchangers in the market. When used with wort chilling, you will save the most in time and water. To clean them, simply back flush with clean water and then bake in an oven to evaporate out all of the water for storage between brews. If you are looking for an economical chiller, choose one of the B3-12A models. The B3-23A models have twice the length of the economical chillers and are the preferred models by most home brewers. If you need performance, we highly recommend using the B3-36A models. Remember that the length of the unit is most important for efficient heat transfer while adding plates is generally to relieve pressure drop through the channels (with some added heat transfer). It's usually better to buy a longer unit than to get one with more plates for the sake of performance. Note: Our beer wort chillers have garden hose fittings fo...
Beer Chiller Sticks By IOINA [Pack of 2] Single Bottle Beverage Cooler is Perfect Beer Gift, Beer Accessories for Husband Boyfriend Birthday Father's Day Pool Party Beach BBQ Family Fun
Now enjoy the occasion more without the worry of getting your beer warm. - How do you feel if your friends are over at your place and you forgot to put the beers in the fridge? - Tired of messy ice bucket and after mess they create? - Looking for easy solution to make your beverage taste great? Best Birthday Gifts for him Perfect for any Beer Lovers in your life. Can't beat that. People love to have these as a Birthday Gift, Father's day, Graduation day Valentine's day. boyfriend gift ideas Highlights Of The Product. - The beer chiller stick keeping beers cold from the first sip to the last. - The beer chiller stick can be kept in the freezer all the time, like any ice tray and are dishwasher safe. - These fit to most of the long neck bottles, so perfect for beer, wine, water, soda etc. - The 2 LARGE vents provides smooth flow of the beverage. - The silicone grip creates prefect seal with the bottle, so no spills over. Instruction to use it. - 1. Freeze the Beer chiller sticks for an hour - 2. T...
Set of 2 Stainless Steel Beer Bottle Chiller Chill Sticks, Stainless Steel Bottle Wine Beverage Cooler Cooling Sticks for Birthday, Holiday, Fathers day, Retirement, Christmas party
CHILLER PILLER - INSTANT BEER CHILLING STICK - 2pk CHILLER PILLER Cools Beer/Wine/other beverage INSTANTLY. In-bottle and Drink through system. Cool your beer and drink at the same time Fits any standard neck 12 oz or 16 oz beer bottle and many others Effective, easy and time saving tool Air tight seal at the top Slip-proof Silicone air tight seal FDA approved food grade Stainless Steel structure Stainless Steel durability and strength Easy to clean. Dishwasher safe We recommend storing clean CHILLER PILLER in freezer whenever not in use. So you can have one ready at any time. If you don't have one ready in the freezer, just keep it in freezer for 45 minutes before use. Place firmly on top of your bottle and enjoy your drink. CHILLER PILLER is that simple to use. NO NEED need to watch video or read ebook or memorize instruction sent to learn how to use the CHILLER PILLER.