3.6 out of 5 stars with 28 reviews
Wort Chiller - 25' Copper Immersion Chiller with Brass Fittings
List Price
$54.79
Our Price
$54.79
Savings
0% OFF
* Pricing Information Updated Less Then A Minute Ago
Great for 5 gallon batches! Quickly cool your wort with this 25' copper immersion wort chiller (3/8" outside diameter tubing) Made in the USA. Comes with brass hose connector directly attached, easily connect your garden hose. |
-
25' Length copper
-
3/8" OD copper
-
High quality brass garden hose fittings directly attached - NOT SOLDERED
-
Made in the USA
-
great for 5 gallon batches
Product Information Specifications for Wort Chiller - 25' Copper Immersion Chiller with Brass Fittings Below:
Brand | U.S.A. CHILLER |
Color | Copper |
UPC | 791769311680 |
Units in Package | 1 |
4.8 Stars
27 Reviews
$51.62 (1% Off)
4.0 Stars
27 Reviews
$39.99 (0% Off)
4.5 Stars
26 Reviews
4.9 Stars
25 Reviews
4.6 Stars
25 Reviews
$89.83 (1% Off)
4.3 Stars
24 Reviews
4.4 Stars
23 Reviews
$94.95 (6% Off)
3.8 Stars
23 Reviews
4.8 Stars
22 Reviews
E.C. Kraus Immersion Wort Chiller
Manufacturer: E.C. Kraus
Brand: E.C. Kraus
Color: Multicolor
Cool Your Beer Wort From Boiling To Room Temperature In Just A Few Short Minutes. Cooling Your Wort Down Faster Not Only Saves Time, It Allows Less Time For Your Beer To Become Infected And Oxidized From Excessive Air Exposure. Run Cold Tap Water Through The Copper Tubing While The Wort Chiller Is Submerged In Your Wort. Heat Quickly Transfers From The Wort To The Flowing Water Within The Copper Tubing And Runs Back To Your Sinks Drain. Copper Tubing Is 20 Feet In Length. Perfect Size For Cooling 5 Or 10 Gallons Of Beer. Comes With Two Lengths Of 3/8' Id Vinyl Hose To Reach Back And Forth From The Brew Pot To The Sink. Each Hose Is 3 Feet In Length. Also Has A Brass, Garden Hose Fitting To Thread Onto A Laundry Sink Faucet Or Outside Faucet. See Faucet Adapter Below For Attaching To Most American Kitchen Faucets.
1/4" Copper Wort Chiller
Manufacturer: NY Brew Supply
Brand: NY Brew Supply
Model: W1420-CV
Color: Copper
This immersion chiller is designed for smaller batches up to 5 gallons, and great for those new to home brewing. This wort chiller offers advantages over other economical chillers. Plenty of vinyl tubing is included along with a nylon garden hose adapter and detailed instruction sheet. A stainless steel clamp solidifies the structure of the chiller, and allows for adjustability of the coil spacing and height.* This product is proudly made in the USA. Made from 1/4" OD copper tubing
Legend Angel Marilyn Monroe Raglan 3/4 Sleeve For Men's T-shirt S White/Black
25' Immersion Wort Chiller with Tubing and Garden Hose or Sealed Fittings
Brand: CentralBrewShop
Color: Bronze
An immersion chiller will allow for rapid cooling of hot wort to yeast pitching temperatures. This chiller is 25 feet of 3/8" copper tubing and includes the screw clamps vinyl tubing and garden hose fitting for quick and easy set up. This is a great chiller at a great price! Compression fittings and tubing that is screw clamped in place tend to expand and contract with the drastic temperature fluctuations during the boiling and cooling processes. This expansion and contraction will loosen the compression fittings and cause you to leak unsanitized cooling water into the wort. You just worked hard to make your wort, you don't want to contaminate because of a loose fitting. To insure that your copper coils never contaminate your wort we now offer soldered fittings that are solid and secure. Soldered fittings will never leak. Also with metal garden hose fittings soldered in place to prevent hose bursting and eliminate leaking. The standard listing for this product comes with the vinyl tubing and screw clamps. If ...
Copper Immersion Wort Chiller, 50ft x 3/8in
Brand: Coldbreak Brewing
Color: Copper
This wort chiller is composed of a 50ft x 3/8in OD copper tube for cooling up to 5 gallons in about 10 minutes or 10 gallons in about 20 minutes. It includes 6 feet of vinyl tubing on both ends, hardware and clamps to connect to a standard garden hose thread (3/4in GHT). A kitchen sink faucet adapter is also available in our store. Benefits Of Using A Wort Chiller: - Minimize the time the wort is exposed to contaminating organisms- Reduce oxidation which is accelerated at higher temperatures- Prevent off-flavors from developing- Preserve the delicate aromas and flavors of the beer - Prevent finishing hops or herbs from being overcooked Dimensions: Overall Height: 13.9in (35.2cm) Overall Width: 9in (22.9cm) Coil Height: 8.0 in (20.3cm) Coil Tubing Length: 50ft (15.2m) Coil Tubing Diameter: 0.38in or 3/8in OD (9.5mm) Vinyl Tubing Inner Diameter (both): 0.38in or 3/8in ID (9.6mm) Vinyl Tubing Length: 6ft (1.8m) Faucet Coupling Thread: 3/4 GHT (U.S. Garden Hose Thread) Actual Garden Hose Fitting Insid...
B3-12A 30 Plate Beer Wort Chiller 3/4" MPT x 1/2" MPT Homebrew
Manufacturer: Duda Diesel
"Dimensions L: 7.5"" W: 2.9"" Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate) Thickness of plates 0.3 mm (.0118"") Max Flow Rate 66.6 L/min (17.6 gpm) Channel Capacities 0.018L/channel (.004756 gal/channel) Design pressure 1.0 Mpa (145 psi) Test Pressure 2.0 Mpa (290 psi) Design Temperature -195°C to +220°C (-319°F to 430°F) Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour) Flow direction F1-F3 and F2-F4 (see diag above) Welding Material 99.9% Copper Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water. Manufacture Material Stainless Steel 304 Appl...
16-plate Brazed Heat Exchanger - 3/4" MNPT ports
Manufacturer: Brazetek
Brand: Brazetek
Color: stainless
Compact Brazed Plate Heat Exchanger - great for Solar heating, SVO / WVO oil-preheating applications for trucks, cars and boats, Beer and Wort Chilling, and many other heating and cooling applications. Unit Dimensions: 3"x8" - 16 plates - 316L Stainless Steel - Copper Brazed - 3/4" MNPT Ports - Flow Rate: 15 GPM max - Design pressure 435 psi
HomeBrewStuff Chill Out Copper 8" X 20 Plate Beer Wort Chiller and Back flush Cleaning Attachment (Extra Valve and Thermometer Upgrade)
Manufacturer: Home Brew Stuff
Brand: Home Brew Stuff
Model: B3-12A-20-2
Homebrew Stuff Chill Out Copper Plate Chiller This compact and economical plate chiller is very effective at rapidly reducing worth to pitching temperatures. Plate chillers are more efficient than both immersion chillers and other counter-flow designs. Save water and time while chilling your worth. Reach pitching temp in record time and reduce the chance of contamination or oxidation in your home brew. Made of 30 - 304 stainless steel plates that have been brazed together with 99.9% pure copper in an oxygen-free furnace. Lowers dimethyl levels. Greatly reduces bacteria. While this chiller can be gravity fed, a pump, like our Line of Chugger pumps, can help control flow rates through the chiller and allow for more mounting options. It is strongly recommend purchasing the optional back flush assembly for use in cleaning this chiller, We have included a back flush attachment!!!Easy to use, just attach a garden hose directly to the chiller and reverse flush the worth out. Worth Inlet/Outlet: 1/2" MPT Water ...
25 Foot Stainless Steel Immersion Wort Chiller with No-leak Fittings and Accessories
Manufacturer: JockeyBox.com
Brand: JockeyBox.com
Model: WC-25SS38
Color: Silver
This 25' stainless steel immersion wort chiller makes cooling your beer wort fast and easy. Just connect one line to your hose and place the other line in a drain. Then place the serpent style immersion wort chiller in your beer wort. Now you're ready to turn on your cold water. Wort is cooled by running cold water through the coils. The 3/8" OD of the stainless steel tubing allows for a high flow rate, cooling your wort fast and efficiently. Food Grade 304ss is a more stable material than copper and does not corrode or contaminate your wort. 304ss is also easier to clean and maintain than copper. This kit contains all the parts you need to get started immediately. The serpent style immersion wort chiller is much simpler to operate than a counterflow wort chiller. Includes: 3/8" 25' stainless steel serpent style coil, cut-to-fit vinyl tubing, three house clamps, and garden hose adapter.
Top Level Categories for Wort Chiller - 25' Copper Immersion Chiller with Brass Fittings.
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!