Beer Brewing - Page 213

Manufacturer: Kegconnection Brand: Kegconnection Color: clear, red, black

Beer Line Cleaning Kit, Gravity Feed Detailed, illustrated , easy to use instructions included! Featuring 8 oz. bag of "Brew Clean" - a safe, and easy powered form cleaner, Made in the USA! Assembled in the USA from Domestic and foreign components. Metal Faucet Wrench, Made in the USA! Bottle is marked in both ounces and ML and is Made in the USA. Ball Lifter for holding check valve ball on beer coupler (also called tap) open so liquid can pass through beer coupler (no need to remove like some cleaning kits!) CMBecker blastic plastic connection for connecting the cleaning line directly to the tower or standard shank High quality faucet brush is included. Info on assistance is included in instructions should you need help with this product. We don't think you will after you see the Instructions!

Manufacturer: The HomeMade Gin Kit Brand: The HomeMade Gin Kit

The Homemade Gin Kit contains everything you need to transform a generic bottle of vodka into a unique and delicious home-blend of your very own gin! Features: 1) Makes 2550ml of homemade gin 2) Two 375ml glass bottles 3) Stainless steel funnel & fine stainless steel strainer 4) Three tins of Juniper Berries 5) One tin of Secret Botanical Blend 6) One tin of Secret Spicy Blend 7) One tin of Secret Smoky Blend A kit so EASY AND FUN, anyone can enjoy making gin!

Manufacturer: Stir-Plate Brand: Stir-Plate Model: TowerCooler Color: White and clear

Our beer kegerator tower cooler is designed to cool the beer tower on your home kegerator, a direct draw type draft beer system. With a direct draw system, the beer keg is stored in a refrigerator or cooler right below the beer tower. The number one complaint about any direct draw home kegerator is your first 1/2 glass of beer is always foamy. The reason for this is simple - the beer faucet & shank inside your beer tower get warm between glasses and cause your foamy beer. And the solution is less than 5 minutes away - just install our Beer Tower Cooler! Our tower cooler works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is the continuous cold keeps faucet mold and bacteria growth inside your beer faucet at an absolute minimum. Our tower cooler ships with everything pictured - completely assembled beer tower cooler, zip tie to tie your tower cooler to your beer lines and high quality 1 Amp 12VDC Energy Star power supply.Air flow is all about your fan rating and the hose diameter you are pushing air through. Our ¾" ID diameter hose flows more air to your beer tower than the competition's "upgraded" ½" diameter hose no matter what they claim their fan's CFM is, plus their ridged air hose offers even more air flow resistance.

Manufacturer: Olmstead Products Corp Brand: Olmstead Products Corp Color: White handle

The D system coupler is without a doubt the most popular Sankey out there, seeing as it's exactly what you need to tap 99% of the beers brewed in North America. Fits Budweiser, Michelob, Busch, Miller Lite, Milwaukee's Best, Coors Light, Killian's, Sam Adams, Pete's Wicked, Molson, Labatt, OV, Moosehead and lots more. *Please Note: Due to the longer lever handle on this keg coupler, it will not fit 1/6 barrel kegs.*. In stock and ready to ship. Specs: Fits D System keg valves.

Brand: Learn To Brew LLC Color: black

Sankey D coupler

Manufacturer: Taprite Brand: Taprite Color: Silver, Black, Red

Same as Coupler above, but set up with MFL tailpieces for switching between Sanke and homebrew setups. This is a "D" American (Sanke) Coupler (Tap), that you would use with the majority of commercial American beers and most Micro Brews. This tap is Low Profile and allows you to tap a keg in tight situation, such as inside of a shorter fridge unit. Because the lines come out to the side this tap sticks up about 2 1/2 inches from the keg vs. about 5" with line on a conventional Coupler. This tab features a quick twist top that makes it easy to use! An excellent tap! Need a complete kit? I can set up what you need for Commercial, homebrew or a combo. From a simple party tap to a Fridge or Tower.

Manufacturer: Kegco Brand: Kegco Model: KC SH316NA-518 Color: Stainless Steel

This shank is 5-1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16" ID beer line connection.

Manufacturer: Learn To Brew Brand: QuickFit Model: QFCOUPD Color: Silver

This keg coupler is D style keg tap. This stands for domestic and fits on just about every American beer keg. This is the most common style of keg coupler. The top port is the beer out and the side port is the gas in. These are easy to use and easy to clean. Plus, this design will not leak as has been reported in the reviews of the kegCO coupler.

Manufacturer: Kegco Brand: Kegco Model: YH-762-2 Color: Chrome

The Kegco 762-2 double gauge two product commercial grade regulator ensures peak performance every time, even in demanding commercial environments like bars and restaurants. Durably constructed for a consistent flow pour after pour, it features a T-Style adjustment valve that makes it easier than ever to adjust the pressure in your kegs. This two product regulator includes a y splitter for applications where two kegs will be dispensed at the same keg pressure, and has two independent shut-off valves. A gauge on the top of the regulator indicates how much CO2 pressure is inside of the keg while a gauge on the side indicates the volume of CO2 gas remaining in the tank. A pressure release valve is conveniently located on the regulator body.

Manufacturer: Measuring and Testing Brand: Happybrew Model: W0194 Color: Black

This refractometer is specifically created for brewing of BEER but it can also be great for:Fruits, vegetables & grasses: monitor and control sugar concentrations in foods, beverages, crops and plants, checking the "ripeness"of fruit in the field and verifying product quality after harvesting and/or controlling concentrations during processing and packaging to ensure product quality Wine or beer: Use Brix readings to get wort sugars and help determine finished alcohol readings (for alcohol reading, best use in conjunction with a hydrometer) Metalworking fluids: helps in maintenance of CNC coolants and water soluble drawing & stamping compounds and commonly used for controlling the concentration of various industrial fluids like cutting lubricants and flux rinsing compounds The need to consult temperature correction charts is eliminated with the built-in 10-30°C ATC. The unit also comes with a manual calibration knob that is secured with a lock nut and has a brighter display than the more narrow range refractometers. Package Included 1x RSG-100ATC Refractometer 1x Pipettes 1x A Mini-screw driver 1x Protective carrying case