Beer Brewing - Page 162

Manufacturer: Kegconnection Brand: Kegconnection Model: PigtailSet-PL-Gas-Liq Color: red, clear, black, grey

Single Line replacement for basic pin lock kit. Includes both gas and liquid line. CMBecker Pin Lock disconnects(gas and liquid) Just what you need for fresh, new lines-1 set.i

Brand: The Weekend Brewer Color: White

This CO2 keg charger is great for keeping a 5 gal or mini-keg charged when you are away from home. No need to lug along your large CO2 tank and regulator. This charger attaches to any standard ball lock keg with the included MFL disconnect. The mini-regulator will maintain proper dispensing pressure. This product is intended for maintaining dispensing pressure only, not recommended for initial carbonation of your beer. Note: 5 gallon kegs will require multiple cartridges to fully dispense.

Manufacturer: Home Brew Ohio Brand: Midwest Brewing and Winemaking Supplies Color: Black

The zork wine closure is a combination closure and pull-off capsule which fits on many standard 750 ml wine bottles. Insertion is simple, and does not require a corker. Removal by tear-off strip produces a re-usable t-cork, and does not require a corkscrew.

Manufacturer: Copernicus Toys Brand: Copernicus Toys

It's time to get back to basics and brew your own ginger ale. This kit makes a classic spicy ale using the science of fermentation. Kit includes ginger-ale extract, yeast, a funnel, labels and instructions.From the ManufacturerBrew your own ginger ale with a real bite. It's time to get back to basics and brew your own ginger ale. This kit makes a classic spicy ale using the science of fermentation. Kit includes ginger-ale extract, yeast, a funnel, labels and instructions. Packed in a 4x6" box.

Manufacturer: Happybrew Brand: Happybrew Model: W0190 Color: White

Unlike the cheaper charger kits made from plastic This little charger kit is made of machined anodised aluminium. The Premium Regulated Charger is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little Just use the regulator to set the pressure. Simply screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure. Notice There are 2 kinds of regulator for this charger kit.One is 0-150psi,the another one is 0-60psi. Every coin has 2 sides,0-60psi makes it very easy to get a 10psi setting ,but it wash out easily by the higher psi co2, especially for some new homebrew people,it's a little difficult for them to handle co2 below 60psi, if the co2 over 60psi,this 0-60psi regular will be damaged.That;s why most homebrew people choose 0-150psi just a few professional homebrew people choose 0-60psi.If u want to dial in the PSI perfectly,pls choose 0-60psi. Package Included 1×Preminum Regulated Co2 Charger Kit 1×Gas Disconnect(Ball Lock)

Manufacturer: Deep South Barrels Brand: Deep South Barrels

This barrel is made of American White Oak and was handcrafted to hold approximately one liter. It is held together by pressure with six black steel hoops and comes with a stand, bung and a spigot. The barrel has been given a medium char inside which caramelized the sugars in the oak. The charring of the oak is what allows the barrel to age your alcohol. These barrels are perfect for mellowing and enhancing the flavors of whiskey, bourbon, rum, tequila, scotch, brandy, cognac, red wines and vinegar. Your barrel can be personalized with names, phrases, or logos. We offer laser engraving for the personalization. Check out our Facebook page for a few examples of customized barrels. Personalize Your Barrel Now   Instructions For Using Your BarrelCuring The BarrelCleaning The BarrelMaintaining The BarrelStoring The Barrel

Manufacturer: Happybrew Brand: Happybrew Model: W0190 Color: White

Unlike the cheaper charger kits made from plastic This little charger kit is made of machined anodised aluminium. The Premium Regulated Charger is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little Just use the regulator to set the pressure. Simply screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure. Notice There are 2 kinds of regulator for this charger kit.One is 0-150psi,the another one is 0-60psi. Every coin has 2 sides,0-60psi makes it very easy to get a 10psi setting ,but it wash out easily by the higher psi co2, especially for some new homebrew people,it's a little difficult for them to handle co2 below 60psi, if the co2 over 60psi,this 0-60psi regular will be damaged.That;s why most homebrew people choose 0-150psi just a few professional homebrew people choose 0-60psi.If u want to dial in the PSI perfectly,pls choose 0-60psi. Package Included 1×Preminum Regulated Co2 Charger Kit 1×Gas Disconnect(Ball Lock)

Manufacturer: Taprite Brand: Taprite Model: N2-REG-516BARB Color: Varies

Dual-gauge, high-performance regulator for nitrogen use. Great for straight nitrogen, G-mix or beer mix.

Manufacturer: Vestil Manufacturing Brand: Vestil Model: JUG-S-1

Vestil rectangular jug is for use in industrial and commercial applications. Ideal for storing or transporting a variety of liquids. Tin-plated steel construction with threaded steel closure. Measures 4-1/8-inches length by 6-19/32-inches width by 10-3/8-inches height.

Manufacturer: GiftsForYouNow Brand: GiftsForYouNow Color: Multicolor

Beer bottles come and go, but this custom beer growler is a gift that lasts forever. Our 64 oz. personalized bottle features amber glass, which helps protect your beer from harmful UV rays and prevents it from getting spoiled and "skunked." A metal cap with rubber liner also helps preserve the freshness of your beverage. Refillable and reusable, this amber beer growler is great for the environment and will be personalized with any name and established year at no additional cost.