Brew Pots, Kettles & Accessories - Page 45

Manufacturer: HomeBrewStuff Brand: Home Brew Stuff Model: HB-IT Color: Stainless Steel

This In-line Thermometer allows real time temperature monitoring. Use this handy gadget on the outlet of your counterblow or plate chilling system, to monitor exact temperature, of the flowing liquid. The large 3" dial thermometer gives an accurate real-time reading. Our Homebrew Stuff thermometer is designed to be an effective instrument in the beer brewing process. You may notice that the temperature range has been reduced from a typical 0 degree - 250 degree to a reduced range of 50 degree - 220 degree, this reduced temperature range makes the thermometer more accurate, and the temperatures easier to read. There is a calibration screw on the back so that the thermometer can be boil calibrated for the most accurate mashing temps.

Manufacturer: Home Brew Stuff Brand: Home Brew Stuff Model: SS-V3TC

The Homebrew Stuff Deluxe 3 piece 1/2" Stainless Steel full port ball valveSanitary hose connections just like the professional breweries use. 2" diameter disc on two fittings are clamped together with a high temp silicone gasket in between, providing a clean efficient connection for valves, hoses, etc. Fittings are all 304 Stainless steel. 1 1/2" Sanitary Clamp (this is the actual clamp that holds fittings together) Please check our other Homebrew Stuff listings for more accessory parts.

Manufacturer: Concord Cookware Brand: Concord Cookware Model: WP40-100-TRI-MT

Sizes Available: 40 Quart Brew Kettle. Size: 13.75" Width x 15" Height (Inner Measurements) 60 Quart Brew Kettle. Size: 15.75" Width x 18" Height (Inner Measurements) 80 Quart Brew Kettle. Size: 17.75" Width x 18.5" Height (Inner Measurements) 100 Quart Brew Kettle. Size: 19.75" Width x 19.50" Height (Inner Measurements)

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2WCL-R150P Color: Stainless-Steel

This Dixon B2WCL series 90-degree polished weld short elbow sanitary fitting is made of stainless steel 316L and welds to tubing on both ends. This elbow fitting, also called an "ell," welds to tubes at a 90-degree angle to change the direction of flow between pipes or tubes. It is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. The lower carbon content of the material minimizes harmful carbide precipitation due to welding. This fitting has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature and meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This 90-degree polished weld short elbow sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: L14AM7V-R400

Schedule 5 long weld ferrule. Made of stainless steel 316L. 4" Tube OD. 1.125 Length. Pack of 1.

Manufacturer: Northern Brewer Brand: NorthernBrewer Color: Stainless Steel

The 8-gallon MegaPot 1.2 is ideal for performing a full wort boil on any 5 gallon batch. A full boil helps to improve hop utilization and avoid caramelizing the malt extract. This homebrew kettle is a great upgrade for any extract brewer, but will work for 5 gallon All-Grain boils as well. While it can work as an All-Grain mash tun using the Universal False Bottom, the smaller size will limit your grain bill to lower gravity beers. Ideal for: boiling no more than 5-6 gallons of wort. Smaller partial mash or Brew-In-A-Bag systems. MegaPot 1.2 is a stainless steel masterpiece, not just another stainless steel stock pot. Every detail has been thought through to enhance the homebrewing experience. The heart of the kettle is a 4mm thick Tri-Clad bottom- made specifically for even heat distribution. Graduated volume markings inside the kettle allow for easy volume measurements during the boil. The 1.2 proportion of MegaPot has been scientifically designed to promote a vigorous boil and reduce off-flavors making it the ultimate home brew kettle.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2S-G100P

This Dixon B2S series 90-degree polished weld long elbow with tangent sanitary fitting is made of stainless steel 304 and welds to tubing on both ends. This elbow fitting, also called an "ell," welds to tubes at a 90-degree angle to change the direction of flow between pipes or tubes. This fitting has tangents, or straight ends, to provide aligned welding and is made of stainless steel 304 for resistance to corrosion and high temperatures. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 90-degree polished weld long elbow with tangent sanitary fitting meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621) and is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: 14WI-G400

This Dixon 14WI series male I-line short weld ferrule sanitary fitting is made of stainless steel 304 and seals a tube or hose fitting. This ferrule interlocks with a female I-line ferrule fitting to help provide a leak-resistant seal on a tube or hose. It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This male I-line short weld ferrule sanitary fitting meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621) and is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes, and shapes. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in Chestertown, MD.

Manufacturer: Ilsa Brand: Ilsa Model: 008 003 Color: stainless steel

Historically it is the oldest coffee maker. It exploits the concept of the fall of boiling water on the coffee powder. People still appreciate this type of coffee for both tradition and also for the actual particular flavour of the coffee, light and suitable for the evening. The traditional model is now being produced in the stainless steel version.

Manufacturer: BSG Brand: BSG Color: Stainless Steel

Full Port weldless ball valve for thick walled coolers. Threaded nipple is 2 1/8" long male NPT.