Kegs & Kegging - Page 56

Manufacturer: Spoetzl Brewery Brand: Spoetzl Brewery Color: Yellow

Measures 11 inches tall. Rams head figure on top. Features the Shiner Bock logo. Gold colored ferrule. Same design all three sides.

Brand: Dos Equis Lager Especial Color: Green Gold

Measures 11.75 inches tall. Features the Dos Equis XXX logo. Resin construction. Reads Dos Equis down each side. New.

Manufacturer: Spoetzl Brewery Color: Yellow

Manufacturer: Oetiker Brand: Oetiker Color: Silver

The Oetiker Clamp is the best size Clamp for attaching hoses. The entire inner circumference of clamp is completely free of any steps, gaps or bridges for no-leak seals

Manufacturer: Kegco Brand: Kegco Model: KC KT2410W-M Color: Brass

The Kegco KT1104W-A German Slider A System Keg Coupler is compatible with beer kegs such as Warsteiner, Hacker Pschorr and Paulaner. It has a stainless steel probe that is resistant to chemicals and won't chip like chrome. It's ergonomic lever handle easily clicks up and down to engage the keg, making it more convenient than the conventional lever style keg couplers that need to be pulled out before being pushed down. It also features a 55-psi pressure release valve to prevent over pressurizing the keg.

Manufacturer: Kegco Brand: Kegco Model: A-JTCVS-EC02-5 Color: Silver

The Beverage Factory offers only brand new aluminum Co2 Tanks. We do not sell reconditioned steel tanks. Every Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators.

Manufacturer: Home Brew Stuff Brand: Home Brew Stuff Model: C325-630SSTH Color: Stainless Steel

This shank is 3 1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange, compression ring and forged Brass lock nut. 3/16" ID beer line connection.

Manufacturer: ACU Precision Sheet Metal Brand: ACU Precision Sheet Metal Model: DT-24 Color: Silver

The SM (surface mount) Style drip tray is designed to sit on the top of any suitable surface. Our drip trays are made of 18 GA. Stainless steel in #4 finish brushed finish. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for Safety and appearances. Each tray comes with a standard 20 GA. Louvered screen.

Manufacturer: ACU Precision Sheet Metal Brand: ACU Precision Sheet Metal Model: 0150-24

The SMD (Surface Mount with Drain) style drip trays are designed to mount to the top of any suitable surface with a drain hole drilled through. Trays are secured to surface using supplied hardware. Drip Trays are made of 18 ga. Stainless Steel in #4 brushed. The corners and seams are welded and ground to a brushed finish. All exposed edges are deburred smooth for safety and appearances. Each tray comes with a standard 20 ga. louvered screen. Drain tubes are 5/8-18 x 3" brass and secured to welded female drain fitting.

Manufacturer: StribCo Brand: StribCo Model: ZombieHand Color: Handpainted Green

If you're serving a premium brew on tap, this Zombie Hand beer tap handle is a must-have! Made from solid resin, a tap handle like this is sure to bring a fun-loving vibe to any bar. It fits easily atop any standard US draft beer faucet so you can be confident that it will work with your specific draft system. Don't settle for a boring black plastic beer tap when you can put this Awesome Zombie Hand to work pouring your brew! In stock and ready to ship. Features: Made of hand painted solid resin. Specs: Dimensions: about 11" high.