Hydrometers - Page 36

Manufacturer: Bel-Art Brand: SP Scienceware Model: B61800-0500

Made from optical quality polycarbonate plastic material, these plain form hydrometers are durable and shatterproof, and perfect for field work where breakage could be a concern. They are used for measuring sodium chloride saturation of salt brines in various industries including food, fishing, and transportation. At 300mm (12”) long, they contain lead free ballast and are available in models to measure various levels of salt content from 0% to 100%. Easy to read black scale on yellow back helps avoid eye fatigue. Each is individually serialized and has a temperature standardization of 60 degrees F (15 degrees C). DURAC Polycarbonate Hydrometers are made and hand inspected by our U.S. quality team in our exclusive triple accredited/registered ISO/IEC 17025:2005 and A2LA Accredited Calibration Laboratory; internationally recognized and accepted by the signatory economies of the ILAC/MRA and located in our ISO 14001:2004 Environmental Management System registered facility. They are packaged with a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy indicating accuracy traceable to NIST. Made in USA. Note: Polycarbonate hydrometers are not recommended for use with petroleum-based liquids or other corrosives that would potentially affect the plastic material. They should be stored in a clean, dry, safe place and should not be subjected to extreme temperatures.

Manufacturer: Bel-Art Brand: SP Scienceware Model: B61891-3100

These hydrometers are used to determine the specific gravity of soil in the range of 0.995 to 1.038, or -5 to 60 g/L (using a weight by volume scale). Made of lead free ballast and glass, these 280mm (11”) long hydrometers conform to the accuracy requirements of ASTM hydrometers. Each is individually serialized and has a temperature standardization of 68 degrees F/68 degrees F. DURAC Soil Analysis ASTM Hydrometers are hand inspected by our U.S. quality team in our exclusive triple accredited/registered ISO/IEC 17025:2005 and A2LA Accredited Calibration Laboratory; internationally recognized and accepted by the signatory economies of the ILAC /MRA and located in our ISO 14001:2004 Environmental Management System registered facility. They are packaged with a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy indicating accuracy traceable to NIST. Note: Soil analysis hydrometers should be stored in a clean, dry, safe place, and should not be subjected to extreme temperatures.

Manufacturer: Home Brew Ohio Brand: Home-Brew.com Model: TY-95MM-2SU8 Color: Multi

Handy Test Kit for wine making and moonshine.

Manufacturer: Vee Gee Brand: VeeGee Model: 6603DS-1

Specific Gravity, also known as relative density, is the ratio of the mass of a solid or liquid to the mass of an equal volume of distilled water. The standard temperature of calibration in the U.S. is 60°F/60°F. All Bellwether Specific Gravity Hydrometers listed are calibrated at 60°F/60°F. 1.000-1.220 Specific Gravity Range, 0-26° Heavy Baume Range. 0.002/2° Subdivision. Dual Scale

Manufacturer: Bel-Art Brand: SP Scienceware Model: B61891-0300

Available in a variety of models measuring specific gravity of heavy and light liquids in various ranges from 0.650 to 2.000 in accordance with the American Society of Testing Materials (ASTM) E100 standards. Specific gravity hydrometers are the most widely used hydrometer, common in industries such as food and beverage, chemistry, pharmacology, transportation, refrigeration and more. Made of lead free ballast and glass, these plain form hydrometers conform to the accuracy requirements of ASTM hydrometers as listed. Each is individually serialized and has a temperature standardization of 60 degrees F. ASTM Hydrometers are hand inspected by our U.S. quality team in our exclusive triple accredited/registered ISO/IEC 17025:2005 and A2LA Accredited Calibration Laboratory; internationally recognized and accepted by the signatory economies of the ILAC/MRA and located in our ISO 14001:2004 Environmental Management System registered facility. They are packaged with a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy indicating accuracy traceable to NIST. Note: ASTM hydrometers should be stored in a clean, dry, safe place. They should not be subjected to extreme temperatures.

Manufacturer: Thermco Brand: THERMCO

Thermco's Petroleum Gold Brand Hydrometers are a superior brand of high precision hydrometers calibrated to the highest standard that exceeds the exacting ASTM standards. Made from the finest materials available; the glass is free from imperfections, has the suitable thermal properties for the entire temperature range that would be subjected and resists any reactions from chemical agents. Each hydrometer has been calibrated against NIST standards and furnished with a NIST traceable certificate. All hydrometers conform to or exceed all specifications set forth in the ASTM "Annual Book of ASTM Standards", Section 14, Volume 14.03, Designation E 100-05.

Manufacturer: Vee Gee Brand: VeeGee Model: 6613-H

The Hydrometer is an instrument which is constructed on the Archimedes principle that a solid body displaces its own weight of the liquid in which it floats. Hydrometers can be divided into two general classes; namely for liquids heavier than water and for liquids lighter than water. The base hydrometer scale is Specific Gravity, in which distilled water equals 1.000 as the initial point. Liquids lighter than water are scaled below 1.000 specific gravity and liquids heavier than water are scaled above 1.000 specific gravity. Hydrometers are usually calibrated at 60°F/60°F. To determine the density of a liquid, the liquid should be at 60°F. If the temperature varies, the liquid will either contract or expand, depending upon the temperature. Where there is a variation from the standard 60°F, corrections must be applied to the hydrometer reading. To assure proper corrections, a separate accurate thermometer should be used, or a hydrometer in combination with a thermometer, which is sometimes referred to as a "thermohydrometer." Internal Revenue Size H Alcohol Hydrometer. 40-60% Proof Range, 0.2% Subdivision, ±0.4% Tolerance, 305mm Length

Manufacturer: Vee Gee Brand: VeeGee Model: 6613-Q

The Hydrometer is an instrument which is constructed on the Archimedes principle that a solid body displaces its own weight of the liquid in which it floats. Hydrometers can be divided into two general classes; namely for liquids heavier than water and for liquids lighter than water. The base hydrometer scale is Specific Gravity, in which distilled water equals 1.000 as the initial point. Liquids lighter than water are scaled below 1.000 specific gravity and liquids heavier than water are scaled above 1.000 specific gravity. Hydrometers are usually calibrated at 60°F/60°F. To determine the density of a liquid, the liquid should be at 60°F. If the temperature varies, the liquid will either contract or expand, depending upon the temperature. Where there is a variation from the standard 60°F, corrections must be applied to the hydrometer reading. To assure proper corrections, a separate accurate thermometer should be used, or a hydrometer in combination with a thermometer, which is sometimes referred to as a "thermohydrometer." Internal Revenue Size Q Alcohol Hydrometer. 165-185% Proof Range, 0.2% Subdivision, ±0.2% Tolerance, 305mm Length

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: GW074H

These are high precision hydrometers calibrated to the highest standard that exceeds the exacting ASTM standards. Made from the finest materials available; the glass is free from imperfections, has the suitable thermal properties for the entire temperature range that would be subjected and resists any reactions from chemical agents. Each hydrometer has been calibrated against NIST standards and furnished with a NIST traceable certificate.

Manufacturer: Vee Gee Brand: VeeGee Model: 6613-G

The Hydrometer is an instrument which is constructed on the Archimedes principle that a solid body displaces its own weight of the liquid in which it floats. Hydrometers can be divided into two general classes; namely for liquids heavier than water and for liquids lighter than water. The base hydrometer scale is Specific Gravity, in which distilled water equals 1.000 as the initial point. Liquids lighter than water are scaled below 1.000 specific gravity and liquids heavier than water are scaled above 1.000 specific gravity. Hydrometers are usually calibrated at 60°F/60°F. To determine the density of a liquid, the liquid should be at 60°F. If the temperature varies, the liquid will either contract or expand, depending upon the temperature. Where there is a variation from the standard 60°F, corrections must be applied to the hydrometer reading. To assure proper corrections, a separate accurate thermometer should be used, or a hydrometer in combination with a thermometer, which is sometimes referred to as a "thermohydrometer." Internal Revenue Size G Alcohol Hydrometer. 20-40% Proof Range, 0.2% Subdivision, ±0.4% Tolerance, 305mm Length