Dixon B3214MP-G200150 Stainless Steel 304 Sanitary Fitting, Clamp Eccentric Red Fiberglassucer, 2" Tube OD x 1-1/2" Tube OD

Manufacturer: Kegco Brand: Kegco Color: Blue

The Kegco KM7GM-2R Grain Mill is a sturdy mill with an aluminum hopper that can hold up to 7 lbs of grains. It features an alloy block frame that houses two steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes it possible to drive the mill clockwise or counter-clockwise. A hand crank is included, but a great feature is that the mill can be easily motorized with a drill. You don't need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of .070". Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws. You will need to supply or build a base to set the mill over a grain bin or 5 gallon bucket.

Manufacturer: Concord Cookware Brand: Concord Cookware Model: WF40-100

Sizes Available: 40 Quart Brew Kettle. Size: 13.75" Width x 15" Height (Inner Measurements) 60 Quart Brew Kettle. Size: 15.75" Width x 18" Height (Inner Measurements) 80 Quart Brew Kettle. Size: 17.75" Width x 18.5" Height (Inner Measurements) 100 Quart Brew Kettle. Size: 19.75" Width x 19.50" Height (Inner Measurements)

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2CMP-G100

Dixon B2CMP series 90-degree clamp elbow sanitary fitting is made of stainless steel 304 and clamps onto tubing at both ends. This elbow fitting, also called an "ell," connects tubes at a 90-degree angle to change the direction of flow between pipes or tubes, providing a non-permanent seal with take-down access. The fitting, made of stainless steel 304 for resistance to corrosion and high temperatures, has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. It meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This 90-degree clamp elbow sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe l...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B31W-R300250P

This Dixon B31W series polished weld concentric reducer sanitary fitting is made of stainless steel 316L and welds to tubing on both ends. This concentric reducer fitting welds to two pipes or tubes of different diameters that are along the same pipe axis. It is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. The lower carbon content of the material minimizes harmful carbide precipitation due to welding. This fitting has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature and meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This polished weld concentric reducer sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2WCL-G250U

This Dixon B2WCL-G series 90-degree unpolished weld elbow sanitary fitting is made of stainless steel 304 and welds to tubing on both ends. This elbow fitting, also called an "ell," welds to tubes at a 90-degree angle to change the direction of flow between pipes or tubes. It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 90-degree unpolished weld elbow sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes. When purchasing fittings, consider the application, as this ...

Manufacturer: Home Brew Stuff Brand: Midwest Homebrewing and Winemaking Supplies Model: BK-25P Color: Stainless Steel

Heavy duty 1.2 mm thick stainless steel commercial stock pot with triclad bottom, great for use with chugger inline pumps and stainless steel construction.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B7MP-R150

This Dixon B7MP series clamp tee sanitary fitting is made of stainless steel 316L and clamps to tubing on all three ends. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. “A" and “B" indicate the main run on the fitting, and “C" indicates the branch. This fitting has clamped connections for a non-permanent seal, providing take down access. It is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature and meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This clamp tee sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for co...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B7MPS-R200

Short outlet clamp tee. Made of stainless steel 316L. Size: 2" tube OD x 2" tube OD x 2" tube OD. 7.000" Length. Pack of 1.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: 22MP-G150200

This Dixon 22MP-G series clamp adapter sanitary fitting is made of stainless steel 304 and has a tube connection and a female NPT threaded connection. This adapter fitting connects pipes or fittings with different end types. It clamps onto a tube on one end and has female National Pipe Taper (NPT) threads on the other for connecting to male threaded pipe. The clamp end creates a non-permanent seal, providing access to lines, and the NPT threads create a tighter seal than straight threads. It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This clamp adapter sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical,...