Dixon B7MPS-R200 Stainless Steel 316L Sanitary Fitting, Short Outlet Clamp Tee, 2" Tube OD

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: 22MP-G150200

This Dixon 22MP-G series clamp adapter sanitary fitting is made of stainless steel 304 and has a tube connection and a female NPT threaded connection. This adapter fitting connects pipes or fittings with different end types. It clamps onto a tube on one end and has female National Pipe Taper (NPT) threads on the other for connecting to male threaded pipe. The clamp end creates a non-permanent seal, providing access to lines, and the NPT threads create a tighter seal than straight threads. It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This clamp adapter sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical,...

Manufacturer: HomeBrewStuff Brand: Home Brew Stuff Color: Black and Stainless Steel

HomeBrewStuff Weldless Kettle Wort Whirlpool Return for home brewers Brewers That use a immersion chiller, plate chiller, counter flow chiller,or a pump (and dont most of us?) should know that recirculating the wort back into the kettle to whirlpool the wort makes for much faster cooling with an immersion chiller and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom, Keeping it out of those impossible to reach areas of the pump, plate chiller, or counter flow. This whirlpool return should be installed higher than your wort level in the kettle, so that it can extend down the side wall of the kettle before curving to the side to force the recirculated liquid towards the sidewall and around in a circle. This return is also slightly curved to fully circle around the kettle. And full weldless installation hardware is included. Dip tube measures 11.5 inches, with elbow and weldless fitting it is 14 total inches tall. Tall enough to fit most kettles.Includes: 1 Stainless...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B3114MP-R300150

This Dixon B3114MP series concentric reducer sanitary fitting is made of stainless steel 316L and clamps to tubing on both ends. This concentric reducer fitting clamps to two pipes or tubes of different diameters that are along the same pipe axis, providing a non-permanent seal with take-down access. It is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature and meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This concentric reducer sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries t...

Manufacturer: AMCYL Brand: AMCYL Model: KETTLE-A10 Color: Stainless Steel

Professional stainless steel 10 gallon brew kettle with all the features you need to brew your best. High-quality construction, weldless fittings, and ready for add-on accessories.

Manufacturer: Northern Brewer Brand: NorthernBrewer Color: Stainless Steel

The 10-gallon MegaPot 1.2TM is a brew kettle for the long haul. The 10 Gallon size will easily boil a 5-7 gallon batch with plenty of room to avoid a boil over. It is also ideal for the Brew-In-A-Bag method. The optional false bottom allows this kettle to serve as a mash tun for 5 gallon All-Grain systems and has enough space for most beer recipes. If you eventually expand to 10 gallon batches, this kettle can serve as a Hot Liquor Tank when paired with a larger mash tun and boil kettle. Ideal for: 5 to 7 gallon batches, but with plenty of space for Brew-In-A-Bag methods as well. Mash Tun on 5 gallon All-Grain systems or as a HLT on a 10 gallon system. MegaPot 1.2TM is a stainless steel masterpiece, not just another stainless steel stock pot. Every detail has been thought through to enhance the homebrewing experience. The heart of the kettle is a 4mm thick Tri-Clad bottom- made specifically for even heat distribution. Graduated volume markings inside the kettle allow; one at each gallon. Includes a we...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2KMP-G400

This Dixon B2KMP series 45-degree elbow sanitary fitting is made of stainless steel 304 and clamps onto tubing at both ends. This elbow fitting connects tubes at a 45-degree angle to change the direction of flow between pipes or tubes, providing a non-permanent seal with take-down access. The fitting, made of stainless steel 304 for resistance to corrosion and high temperatures, has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. It meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This 45-degree elbow sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a ra...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B7WWW-G400P

This Dixon B7WWW series polished weld short tee sanitary fitting is made of stainless steel 304 and has tube connections. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. “A" and “B" indicate the main run on the fitting, and “C" indicates the branch. It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This polished weld short tee sanitary fitting meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621) and is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are...

Manufacturer: Bialetti Brand: Bialetti Model: BIALETTI1108 Color: Silver

Built in the 30s, it is the symbol of Italian coffee makers. Its birth has changed the way of making coffee, creating a tradition that has confirmed itself nowadays. Its design has remained unchanged over time; it is made of pure polished aluminium and still represents "The Good Italian Coffee".