Dixon 14WMV-R400 Stainless Steel 316L Sanitary Fitting, Schedule 5 Pipe Size Short-weld Ferrule, 4" Tube OD

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2KMP-G150

This Dixon B2KMP series 45-degree elbow sanitary fitting is made of stainless steel 304 and clamps onto tubing at both ends. This elbow fitting connects tubes at a 45-degree angle to change the direction of flow between pipes or tubes, providing a non-permanent seal with take-down access. The fitting, made of stainless steel 304 for resistance to corrosion and high temperatures, has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. It meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This 45-degree elbow sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a ra...

Manufacturer: Strange Brew Brand: Strange Brew Color: Silver

All stainless 20 quart stock pot. Great for home brewing!

Manufacturer: Concord Cookware Brand: Concord Cookware Model: S40-100-TB

Sizes Available: 40 Quart Brew Kettle. Size: 13.75" Width x 15" Height (Inner Measurements) 60 Quart Brew Kettle. Size: 15.75" Width x 18" Height (Inner Measurements) 80 Quart Brew Kettle. Size: 17.75" Width x 18.5" Height (Inner Measurements) 100 Quart Brew Kettle. Size: 19.75" Width x 19.50" Height (Inner Measurements)

Manufacturer: Polar Ware

An all stainless steel brew pot. Measures 9 inches tall with a 12 inch diameter.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2WCL-R400P

This Dixon B2WCL series 90-degree polished weld short elbow sanitary fitting is made of stainless steel 316L and welds to tubing on both ends. This elbow fitting, also called an "ell," welds to tubes at a 90-degree angle to change the direction of flow between pipes or tubes. It is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. The lower carbon content of the material minimizes harmful carbide precipitation due to welding. This fitting has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature and meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This 90-degree polished weld short elbow sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittin...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B3214MP-G200150

Clamp eccentric Red Fiberglassucer. Sanitary fitting. Made of stainless steel 304. Size: 2" tube OD x 1-1/2" tube OD. Sanitary fittings. 3" Length.

Manufacturer: Kegco Brand: Kegco Color: Blue

The Kegco KM7GM-2R Grain Mill is a sturdy mill with an aluminum hopper that can hold up to 7 lbs of grains. It features an alloy block frame that houses two steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes it possible to drive the mill clockwise or counter-clockwise. A hand crank is included, but a great feature is that the mill can be easily motorized with a drill. You don't need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of .070". Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws. You will need to supply or build a base to set the mill over a grain bin or 5 gallon bucket.

Manufacturer: Concord Cookware Brand: Concord Cookware Model: WF40-100

Sizes Available: 40 Quart Brew Kettle. Size: 13.75" Width x 15" Height (Inner Measurements) 60 Quart Brew Kettle. Size: 15.75" Width x 18" Height (Inner Measurements) 80 Quart Brew Kettle. Size: 17.75" Width x 18.5" Height (Inner Measurements) 100 Quart Brew Kettle. Size: 19.75" Width x 19.50" Height (Inner Measurements)

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B2CMP-G100

Dixon B2CMP series 90-degree clamp elbow sanitary fitting is made of stainless steel 304 and clamps onto tubing at both ends. This elbow fitting, also called an "ell," connects tubes at a 90-degree angle to change the direction of flow between pipes or tubes, providing a non-permanent seal with take-down access. The fitting, made of stainless steel 304 for resistance to corrosion and high temperatures, has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. It meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621). This 90-degree clamp elbow sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe l...