(WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.)
One gauge tells you the pressure to the keg and the other shows how much air is left in your air tank. Nonadjustable \"shut down\" blows off at 55-65 psi. Has a convenient air shut off switch. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: 0-60 gauge measure pressure to each keg. 0-2000 gauge measures CO2 in tank. Has air shut off switch for CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Includes: Includes double gauge regulator. . .
AT PRESENT WE DO NOT SHIP TO CALIFORNIA.
Product Information Specifications for Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet Below:
These premium quality faucets feature a forged brass body with a highly polished chome finish. These faucets have brass shaft assemblies and levers with Teflon ball washers which ensure smooth operation. The brass levers have standard threading that is compatible with most branded tap handles. Comes 1 faucet, shank, and 1 tap handle in a set. 1 Chrome Beer Faucet with Brass Lever and Faucet Knob Included The brass levers have standard threading that is compatible with most branded tap handles 4-1/8" Length (Measured from the end of the threading to the end where the faucet attaches) Made to last KegWorks is the only authorized seller for this product. In stock and ready to ship.
Manufacturer: Turbo Tap
Brand: Turbo Tap Reduce Foam Beer Tap
Color: stainless steel
Reduce Beer Foam
This is a retrofit draft beer-dispensing device made from high-grade stainless steel that slips over the end of a standard beer faucet. Due to its advanced design it uses fluid dynamics principles to modify the natural flow of beer coming out of the faucet in such a way that flow turbulence is minimized and, in conjunction with the bottom-of-the-glass fill method, the foam collar is consistently a perfect Â½ to 1 inch thick.
Brand new, never used. Easy slides on to the beer faucet and clamps down with a screw and allen wrench (included). Instructions come with if needed.
Cut your spillage and pump up your sales, this thing will help your business for sure. Or use on your home kegerator to complete your home brew set. Save 10-15 percent on your keg yield. As seen on the TV show Bar Rescue, try it for yourself.
The correct model/size to order is solely determined by your available clearance. Clearance is determined by measuring the open space between the top rim of your tallest glass or pitch...
This Jockey Box Conversion kit offers the perfect portable solution for dispensing ice cold keg beer anytime, anywhere! Make the Jockey Box you want with one, two or more faucets by purchasing one or more of these conversion kits. This is a DIY conversion kit, you will need your own cooler, 1" hole saw, and wrenches to assemble a complete Jockey Box. After constructing your Jockey Box, just connect a keg of warm beer and a CO2 tank to the back of the Jockey Box. Then fill the Jockey Box with ice. Finally, warm beer flows from the keg through 50' of stainless steel coil and arrives deliciously chilled at the faucet. The stainless steel coil features a 3/8" outside diameter and is made with food grade 304ss material. A 3/8" outside diameter allows you to tap beer at a lower pressure for a perfect pour. Coils with smaller diameters (such as 5/16" or 1/4") require higher tap pressure, resulting in foamy inconsistent pours. Stainless steel coils are preferable over cold plates because the coils are longer allowing...
PHILADELPHIA FLYERS HOCKEY BEER TAP HANDLE KEGERATOR
Manufacturer: Tap That Handles
WELCOME SPORTS FANS!!! *****CUSTOM NHL HOCKEY BEER TAP HANDLE***** This Tap Looks Great in any Sports Bar or at any Home Party!!!!! DIMENSIONS: Approximately 12" Tall / 3" at widest point COMPOSITION: Expertly Crafted Product with ALL of Your Favorite NHL Teams!!!! CONDITION: NEW!!!!! NO DAMAGE OF ANY KIND!!!! You Are Viewing a Unique Sports Inspired Collectible Beer Tap Handle!!!!! ALL OF OUR PRODUCTS HAVE:****NO DAMAGE****NO CHIPS****NO SCRATCHES****NO SCUFFS****NO CUTS****NO SCRAPES THIS IS A RARE ITEM THAT IS HARD TO FIND!!!! DO YOU HAVE A BAR OR A RECREATIONAL ROOM??? DECORATE IT IN STYLE WITH THIS BEAUTIFUL TAP
This surface mount drip tray is constructed of 100% stainless steel. This drip tray comes with a detachable grill for easy cleaning. This drip tray comes with a threaded drain nipple that connects to a 1/2" drain line (drain line not included). This tray is ideal for applications where you can run a line from the drip tray to the nearest drain receptacle so you don't have to dump out the drip tray when it fills up.
This double gauge nitrogen regulator is used for dispensing draft beers like, Guinness Stout, Murphy's Stout and Boddingtons. Similar in appearance to a CO2 regulator, the notable difference is the nitrogen tank compatible threading. With two gauges this kegerator regulator can display the pressure going into the keg and also tell you how much nitrogen is left in your air tank. This nitrogen regulator provides distribution for one keg and is equipped with a nonadjustable "shut down" that blows off excess gas at 55-65 PSI. There's also a convenient air shut off switch for when the gas tank isn't in use. * Specs - Mixed Gas Primary Regulator - Nitrogen tanks, 0-60 PSI RHT, 0-3000 PSI LHT, 1 Pressure - 1 Product, and 3/8" Outside Diameter with shut-off.
The Kegco KTP-8D3 is an 8" Metal American D System Keg Pump with a durable Lever Handle that is designed for use with commercial Sankey beer kegs. 8" pumps get more pressure into the keg with each pump so you don't have to pump it as much to dispense beer. This is a hand pump tap, so your beer will go flat overnight. This is designed for parties where you plan on drinking the whole keg that same day or night.
Color: Stainless Steel
This stainless beer faucet is made of cold, hard steel and designed for years of reliable pouring. Unlike some of the draft beer faucets out there, it's spring loaded to ensure a quick, complete close every time. Say goodbye to the messy drips and dribbles! Once you attach it to your system, all you'll need is a faucet tap handle. Features: Made of stainless steel. All stainless steel components inside. Spring loaded for quick, easy, dependable closing. . . Specs: Body Thread: 1 1/8" - 18 Thread (North American Beer Industry Standard). Lever Thread: 3/8" - 16 UNC (Unified Coarse Thread). Dimensions: 3/4"W x 3 7/8"H x 2 3/4"D. . . .