This Jockey Box Conversion kit offers the perfect portable solution for dispensing ice cold keg beer anytime, anywhere! Make the Jockey Box you want with one, two or more faucets by purchasing one or more of these conversion kits. This is a DIY conversion kit, you will need your own cooler, 1" hole saw, and wrenches to assemble a complete Jockey Box. After constructing your Jockey Box, just connect a keg of warm beer and a CO2 tank to the back of the Jockey Box. Then fill the Jockey Box with ice. Finally, warm beer flows from the keg through 50' of stainless steel coil and arrives deliciously chilled at the faucet. The stainless steel coil features a 3/8" outside diameter and is made with food grade 304ss material. A 3/8" outside diameter allows you to tap beer at a lower pressure for a perfect pour. Coils with smaller diameters (such as 5/16" or 1/4") require higher tap pressure, resulting in foamy inconsistent pours. Stainless steel coils are preferable over cold plates because the coils are longer allowing more time for the beer to chill. Includes: One 3/8" OD 50' stainless steel coil, 3" wall shank with 1/4" barbed nipple, 3" faucet shank, chrome faucet, black faucet handle, faucet wrench, and all necessary fittings. Comes with 1/4" barbed nipples ready to connect to your beer and air lines. Beer line, air line, regulator, CO2 tank, and cooler NOT INCLUDED.
Turn your cooler into the perfect portable solution to dispensing large quantities of ice cold beer
50' Stainless Steel Coil quickly chills warm keg beer to ideal despense temperature
3/8-in OD - cools a greater volume of beer, faster and requires less applied pressure from CO2 tank
DIY kit for dispensing draft beer from a keg, turns your cooler into a portable kegerator
Make a professional looking keg cooler that's much easier to use than a home brew hand pump
Product Information Specifications for Jockey Box Conversion Kit Single Faucet, DIY Beer Keg Cooler, 3/8-inch 50' Stainless Steel Coil, Food Grade 304ss Below:
PHILADELPHIA FLYERS HOCKEY BEER TAP HANDLE KEGERATOR
Manufacturer: Tap That Handles
WELCOME SPORTS FANS!!! *****CUSTOM NHL HOCKEY BEER TAP HANDLE***** This Tap Looks Great in any Sports Bar or at any Home Party!!!!! DIMENSIONS: Approximately 12" Tall / 3" at widest point COMPOSITION: Expertly Crafted Product with ALL of Your Favorite NHL Teams!!!! CONDITION: NEW!!!!! NO DAMAGE OF ANY KIND!!!! You Are Viewing a Unique Sports Inspired Collectible Beer Tap Handle!!!!! ALL OF OUR PRODUCTS HAVE:****NO DAMAGE****NO CHIPS****NO SCRATCHES****NO SCUFFS****NO CUTS****NO SCRAPES THIS IS A RARE ITEM THAT IS HARD TO FIND!!!! DO YOU HAVE A BAR OR A RECREATIONAL ROOM??? DECORATE IT IN STYLE WITH THIS BEAUTIFUL TAP
This surface mount drip tray is constructed of 100% stainless steel. This drip tray comes with a detachable grill for easy cleaning. This drip tray comes with a threaded drain nipple that connects to a 1/2" drain line (drain line not included). This tray is ideal for applications where you can run a line from the drip tray to the nearest drain receptacle so you don't have to dump out the drip tray when it fills up.
This double gauge nitrogen regulator is used for dispensing draft beers like, Guinness Stout, Murphy's Stout and Boddingtons. Similar in appearance to a CO2 regulator, the notable difference is the nitrogen tank compatible threading. With two gauges this kegerator regulator can display the pressure going into the keg and also tell you how much nitrogen is left in your air tank. This nitrogen regulator provides distribution for one keg and is equipped with a nonadjustable "shut down" that blows off excess gas at 55-65 PSI. There's also a convenient air shut off switch for when the gas tank isn't in use. * Specs - Mixed Gas Primary Regulator - Nitrogen tanks, 0-60 PSI RHT, 0-3000 PSI LHT, 1 Pressure - 1 Product, and 3/8" Outside Diameter with shut-off.
The Kegco KTP-8D3 is an 8" Metal American D System Keg Pump with a durable Lever Handle that is designed for use with commercial Sankey beer kegs. 8" pumps get more pressure into the keg with each pump so you don't have to pump it as much to dispense beer. This is a hand pump tap, so your beer will go flat overnight. This is designed for parties where you plan on drinking the whole keg that same day or night.
Color: Stainless Steel
This stainless beer faucet is made of cold, hard steel and designed for years of reliable pouring. Unlike some of the draft beer faucets out there, it's spring loaded to ensure a quick, complete close every time. Say goodbye to the messy drips and dribbles! Once you attach it to your system, all you'll need is a faucet tap handle. Features: Made of stainless steel. All stainless steel components inside. Spring loaded for quick, easy, dependable closing. . . Specs: Body Thread: 1 1/8" - 18 Thread (North American Beer Industry Standard). Lever Thread: 3/8" - 16 UNC (Unified Coarse Thread). Dimensions: 3/4"W x 3 7/8"H x 2 3/4"D. . . .
Manufacturer: Home Brew Stuff
Brand: Home Brew Stuff
Color: Stainless Steel
Polished stainless steel 2 tap draft tower - This 3" diameter, tower is heavy duty with welded on mounting plate . Unlike cheaper "chrome plated" ABS plastic or brass towers, this one will not peel or tarnish which means it will stay looking great for years to come. Chrome shanks are specially designed to reduce turbulence and reduce foam. Â The hoses are pre-attached 6" beer lines.Â Our tubing is USA made with a special liner to protect flavor and inhibit bacterial growth. Beware of imported towers that use cheap PVC tubing that will impart off flavors to your beer. After all your hard work, you want to taste that IPA not Chinese plastic. This tower comes ready to install on your bar top or kegerator. You will need to drill a 2.5" - 3" hole and 4 holes for the mounting hardware. Faucets are Chrome plated brass with straight shaft and polished interior.Â Our faucets are made to exacting standards of consistency so you can be assured that replacement parts will always be available and "standard" to the...
The DP-64-D is an all stainless steel door mounted drip tray. This drip tray is 6" wide and is mounted to the door through two screw holes on the backsplash. The drain on this drip tray accepts a 1/2" I.D. tubing or piping. This drip tray is popular due to its clean design and durability. The top vent comes off for easy cleaning.