Stainless Steel Immersion Wort Chiller w/Garden Hose Fittings

Manufacturer: Home Brew Stuff Brand: Home Brew Stuff Model: WC-25B-RECIRC Color: Brown

If you’re tired of wasting time stirring your wort chiller to speed up the cooling process, you might want to try recirculation instead. Not only is it faster it is much more efficient with constant continues recirculation. This immersion chiller features a recirculation arm attached to one of our Chillers, making our best-selling chiller even more effective than ever before. Recirculating you wort can also bring out more hop flavor and wonderful aromas in your IPAs, which is something that every brewer can appreciate. This Immersion Chiller features 1/2" MPT fitting on the recirculation arm to accommodate a barb, a nipple, or a quick disconnect fitting for more customized connections and easier attachments. Its water inlet is 3/4" female garden hose thread, while the water outlet is 3/4" male garden hose thread. This makes it easy to attach the chiller to just about any common water source. With high quality 3/8" copper piping throughout 1/2" MPT fitting on the recirculation arm. Its water inlet is 3/...

Manufacturer: NY Brew Supply Brand: NY Brew Supply Model: AZ-W3850-CG Color: Copper

This super efficient immersion wort chiller is recommended for 5 to 15 gallon batches and will easily cool your wort in minutes! High quality brass garden hose fittings are attached to 50 feet of 3/8" copper tubing. An instruction sheet is included with information on how to use and care for your wort chiller. This product is proudly made in the USA.

Manufacturer: NYBREWSUPPLY Brand: NY Brew Supply Model: W3825-CG+LINE Color: Copper

This immersion chiller will allow for rapid cooling of hot wort to yeast pitching temperatures. This chiller is approximately 25 feet of 3/8" copper tubing with brass garden hose fittings both female and male that are solidly attached in place eliminating any leaks and the potential bursting that is often associated with vinyl tubing that is clamped on with other models of immersion coils. No one wants a burst hose spraying non sterilized water into your wort ruining your beer. You do not want the vinyl tubing near the boiling wort as the high temperatures will significantly weaken the tubing. This is the best model available on the market! The copper loops on this chiller are also easy to adjust to just about any width you desire between the loops. Simply pull them apart to spread them out! Includes 10 feet of drain line and the brass connection with rubber oring for the drain line. This eliminates any trip to the hardware store for the drain side.

Manufacturer: Duda Diesel Brand: Duda Diesel Model: Duda Diesel

"Dimensions L: 12.4"" W: 2.9"" Heat Transfer Area/Plate 0.023 m²/plate (.247 ft²/plate) Thickness of plates 0.3 mm (.0118"") Max Flow Rate 66.6 L/min (17.6 gpm) Channel Capacities 0.04L/channel (.0105gal/channel) Design pressure 1.0 Mpa (145 psi) Test Pressure 2.0 Mpa (290 psi) Design Temperature -195°C to +220°C (-319°F to 430°F) Refrigeration Capacity 3-10KW (10,000-34,000 BTU/hour) Flow direction F1-F3 and F2-F4 (see diag above) Welding Material 99.9% Copper Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water. Manufacture Material Stainless Steel 304 App...

Manufacturer: NY Brew Supply Brand: NY Brew Supply Model: AZ-W1250-CG Color: Copper

This heavy duty immersion chiller is recommended for 10 to 20 gallon batches, but also works well with full 5 gallon boils. It's made from 50 feet of 1/2" O.D. inch copper tubing that will easily cool your wort in minutes!

Brand: CentralBrewShop Color: Bronze

This is an extremely effective 50' copper chiller. The Wort Chiller is made from 50 feet of 3/8 inch copper and is perfect for 10 gallon batches. This item also includes 12 feet of vinyl tubing and hose clamps so you're ready to get chilly right out of the box! This product is manufactured using parts made in the USA!

Brand: Funey Color: Silver

Beer Chiller Stick for Rapid Chilling,2PCS Food Grade Stainless Steel Bottle Wine Beverage Cooler Cooling Sticks-Home and Kitchen Beer Accessories Gift for Men Dad Husband Boyfriend

Manufacturer: Duda Diesel

"Garden Hose Chillers This unit has garden hose fittings welded right to the unit for easy adaptation to your cooling water. They can be fit with regular garden hoses or even quick connect fittings to attach to garden hoses. There is one female and one male garden hose fitting on the unit. The female is intended to receive the male fitting from the end of the hose connected to your faucet and the male garden hose fitting for connecting to another hose for the heated water exiting the exchanger. Garden Hose MalexFemale (water) x 1/2"" Hose Barb (wort) Hose barbs welded directly to the heat exchanger unit allow for easy connections to 1/2"" tubing for the beer wort side."

Manufacturer: Learn To Brew Brand: Quick Chill Model: QC12D Color: Copper

Cool your 10, 15, or 20 gallons of hot worth faster than ever with a double (twin) coil immersion chiller. The twin coils place more of the cooling capacity in the center of the hot worth instead of just the outside like a traditional chiller resulting in faster cooling. This chiller is made in the USA with USA copper.