This immersion chiller will allow for rapid cooling of hot wort to yeast pitching temperatures. This chiller is approximately 25 feet of 3/8" copper tubing with brass garden hose fittings both female and male that are solidly attached in place eliminating any leaks and the potential bursting that is often associated with vinyl tubing that is clamped on with other models of immersion coils. No one wants a burst hose spraying non sterilized water into your wort ruining your beer. You do not want the vinyl tubing near the boiling wort as the high temperatures will significantly weaken the tubing. This is the best model available on the market! The copper loops on this chiller are also easy to adjust to just about any width you desire between the loops. Simply pull them apart to spread them out! Includes 10 feet of drain line and the brass connection with rubber oring for the drain line. This eliminates any trip to the hardware store for the drain side.
25 Feet of 3/8" Copper
Quick cooling, connects to your garden hose
Includes 10 feet of Vinyl Drain Line and Brass Connection
Brass fittings Directly Attached
Product Information Specifications for Copper Coil Immersion Chiller 25 Feet Length with Drain Line Below:
"Dimensions L: 12.4"" W: 2.9"" Heat Transfer Area/Plate 0.023 mÂ²/plate (.247 ftÂ²/plate) Thickness of plates 0.3 mm (.0118"") Max Flow Rate 66.6 L/min (17.6 gpm) Channel Capacities 0.04L/channel (.0105gal/channel) Design pressure 1.0 Mpa (145 psi) Test Pressure 2.0 Mpa (290 psi) Design Temperature -195Â°C to +220Â°C (-319Â°F to 430Â°F) Refrigeration Capacity 3-10KW (10,000-34,000 BTU/hour) Flow direction F1-F3 and F2-F4 (see diag above) Welding Material 99.9% Copper Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water. Manufacture Material Stainless Steel 304 App...
NY Brew Supply Wort Chiller with Garden Hose Fittings, 1/2" x 50', Copper
Manufacturer: NY Brew Supply
Brand: NY Brew Supply
This heavy duty immersion chiller is recommended for 10 to 20 gallon batches, but also works well with full 5 gallon boils. It's made from 50 feet of 1/2" O.D. inch copper tubing that will easily cool your wort in minutes!
50' Copper Immersion Chiller With Vinyl Hose (3/8 inch Tubing)
This is an extremely effective 50' copper chiller. The Wort Chiller is made from 50 feet of 3/8 inch copper and is perfect for 10 gallon batches. This item also includes 12 feet of vinyl tubing and hose clamps so you're ready to get chilly right out of the box! This product is manufactured using parts made in the USA!
"Garden Hose Chillers This unit has garden hose fittings welded right to the unit for easy adaptation to your cooling water. They can be fit with regular garden hoses or even quick connect fittings to attach to garden hoses. There is one female and one male garden hose fitting on the unit. The female is intended to receive the male fitting from the end of the hose connected to your faucet and the male garden hose fitting for connecting to another hose for the heated water exiting the exchanger. Garden Hose MalexFemale (water) x 1/2"" Hose Barb (wort) Hose barbs welded directly to the heat exchanger unit allow for easy connections to 1/2"" tubing for the beer wort side."
Cool your 10, 15, or 20 gallons of hot worth faster than ever with a double (twin) coil immersion chiller. The twin coils place more of the cooling capacity in the center of the hot worth instead of just the outside like a traditional chiller resulting in faster cooling. This chiller is made in the USA with USA copper.
Brand: Home Brew Ohio
Reduce your wort to pitching temperatures quickly with this highly effective stainless wort chiller. With a design similar to that of the therminator, this Shirron chiller is made of 10 stainless steel plates that have been brazed together with pure copper in an oxygen-free furnace. It's a counter flow wort chiller, equipped with threaded male hookups for the wort and male garden hose fittings for the wastewater which makes it possible for your wort to be pumped or gravity fed. Features: Made of stainless steel and pure copper. Quickly chills your wort to pitching temperature. Helps prevent wort oxidation. Lowers dimethyl sulphoxide levels. Greatly reduces bacteria. Specs: Dimensions: 13" L x 3" W x 2" H. Wort side fittings: 1/2" male NPT. Water side fittings: 3/4" male garden hose thread.
Beer Chiller Chill Sticks - Drink Thru Beer Chillers. Set of 2. Keeps Beer Cold to the Last Sip. PERFECT CHRISTMAS GIFT, STOCKING STUFFER, OR CHANUKAH HANUKKAH GIFT. Gifts for Men - On a Birthday, Holiday, Graduation, or Retirement!
Keep your Cool with Chill Sticks Beer Chillers
â€¢ A summer bbq, tailgate, and graduation party must have.
â€¢ Fits most long neck beer bottles.
â€¢ Durable and sturdy stainless steel is fast freezing, and holds up over countless uses
â€¢ Easy to use and clean
(1) Freeze Chill Sticks
(2) Insert in beer bottle for airtight seal
(3) Drink cold beer to the very end!
(4) Rinse to clean
**Chill Sticks are 100% FDA compliant, BPA Free, and Eco Friendly**
Contain a food grade chilling gel in the center, allowing for minimum freezing time (2 hrs.) and longer cooling time, over any other type on the market.
They can also stay cold for hours under the proper conditions, like in a thermos or cooler. The combination of the high grade stainless steel and the food grade chilling gel is what gives our stones the advantage over the other cheaper brands out there, allowing them not only to chill a warm drink, but also to hold the temperature of an already chilled drink, for a much longer period of time.
How To Use: * Keep Warm/Cold Drinks Cold: - Please wash stones before first use.
- Place stones in freezer for 4 hours or more.
- When ready, add 3-4 standard size stones per drink and enjoy. - To clean, rinse with warm water and air dry. Tips: *
The ice stones stay at the bottom of the glass. *
The stone edges are rounded, preventing scratching. *
Bring a mellow chill to the drink, don't melt or water down your fine drink flavor. *
Cool and great gift idea. ...