Keg Works Double Tap Draft Beer Tower, Stainless Steel, 3" D

Manufacturer: KegWorks Brand: KegWorks

Tap two kegs at the same time using one regulator and air tank. This unit includes our double gauge poly carbonate bonnet regulator with a “Y†fitting, two air shutoff valves. * The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure.

Manufacturer: KegWorks Brand: KegWorks

The perfect custom tap handle is just a label away! Time after time, you can create the personalized beer tap you want! Fit for any brand or your own homebrew, this solid stained natural oak tap handle is standard size with a Plexiglas window to clearly display any label. When you're ready for a change, simply swap the signage inside for a whole new handle! In stock and ready to ship. Features: Totally customizable. Made with a stained natural oak finish. Standard size to fit US standard faucets. . Specs: Fits standard US faucet threads (3/8"-16 UNC). Dimensions: 12"H. .

Manufacturer: Kegconnection Brand: Kegconnection Model: 6831 Color: Multi

This kit includes two 1/4" MFL tailpieces, a liquid MFL disconnect, a gas MFL disconnect, a 1/4" barbed swivel nut, a 5/16" barbed swivel nut, and two stainless worm clamps. Instructions: Take the beer and gas line off of your existing Sanke tap. Remove the tailpieces you removed line from, and replace with the 1/4" MFL tailpieces from kit. Put the 5/16" swivel nut on your gas line, and the 1/4" swivel nut on your beer line. Note: For 3/16" lines, dip the line into boiling water for 30 seconds, and it should slip on nicely. Lastly, tighten down with worm clamps. You can now go between the Sanke Tap and homebrew disconnects by unscrewing the swivel nuts, and screwing back on the connection you need.

Manufacturer: MiiR Brand: MiiR Model: 402060 Color: Silver

The MiiR Pint Cup is the perfect cup to take anywhere. The right size for any beverage, the durable stainless steel pint cup is ready for any adventure you care to invite it to.

Manufacturer: Home Brew Stuff Brand: Home Brew Stuff Color: Stainless Steel

Stainless Steel Drip Tray 6" x 12" Wall Mount * 2" high back with keyhole hangers * 3/4 " high tray * Removable grid tray * No Drain

Manufacturer: Luxfer Brand: Luxfer Model: CYL-2.5-AL-CO2-N Color: Natural

(WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.) Brew at home with these premium aluminum CO2 cylinders.. Clean corrosion-resistant and lightweight. Highly corrosion-resistant interior and exterior ideal for wet gases such as CO2.. Tanks perform well at low temperatures.. Up to 40 percent lighter than comparable steel Tanks.. Consistent tare weight thick consistent walls resist damage.. Brushed external surface provides a low-maintenance finish.. Tanks cycle-tested in excess of 100 000 cycles at service pressure.. Minimum burst pressure tested to 2.5 times service pressure without failure.. Item Weight - 7.55 lbs.

Manufacturer: Caphandles Brand: CapHandles

We heard you might want a shorter version of our popular CAPHANDLE! Introducing.... Lil Cappy! These great looking Tap Handles show what beer is on tap. Proudly show your Home Brew Draft selection and update easily just by switching the Bottle Cap. Your favorite Commercial or Craft Beer, or even your own custom printed cap! A small, powerful Rare Earth Magnet holds your cap in place until you're ready to change it out. They have a 3/8-16 metal insert for mounting to standard American tap faucets.

Manufacturer: KegWorks Brand: KegWorks

Made of durable, bushed Stainless steel with a Plastic splash grid. Faucet and shank feed through the hole at the top so this hangs at the perfect height. Includes a drain hole in bottom to easily set up a drain bottle or drain hose. Perfect for refrigerators or mounting to your wall.

Manufacturer: Home Brew Stuff Brand: Home Brew Stuff Model: HBS-2FSC Color: Chrome

These premium quality faucets feature a forged Brass Body with a highly Polished chime finish. These faucets have Brass shaft assemblies and levers with Teflon ball washers which ensure smooth operation. The Brass levers have standard threading that is Compatible with most Branded Tap handles. Comes 2 faucets, 2 shanks, and 2 Tap handles in a set.