Extech PH100 ExStik pH Waterproof Meter

Manufacturer: Extech Brand: Extech Instruments Model: RE300

What's Included: Flat surface ORP electrode, protective sensor cap, sample cup with cap, four 3V CR2032 button batteris and 48" (1.2 m) neckstrap. High resolution of 1 mV Measures ORP/Redox from -999 to 999 mV Automatic electronic self calibration Simulated analog bargraph displays change in ORP reading Waterproof to IP57 protects meter from wet environments

Manufacturer: Extech Brand: Extech Model: EC500

Designed and built for a wide range of applications including process and HVAC cooling towers, industrial and commercial boilers, reverse osmosis systems, pools and spas. The ExStik II pH/conductivity meter combines a rugged flat surface pH electrode with an autoranging highly accurate conductivity cell to precisely measure conductivity, TDS, salinity, pH, and temperature. It delivers seven selectable units of measure: pH, µS, mS, ppm, ppt, mg/L, and g/L. It also provides automatic temperature compensation, adjustable conductivity to TDS ratio (0.4 to 1.0), and a 0.5 salinity ratio. The unit features an analog bar graph that indicates trends, internal memory that stores up to 25 data sets, a renew feature that alerts you when the electrode needs replacement, auto power off, and a low battery indicator. It comes complete with protective sensor cap, sample cup with cap, four batteries,

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98129 Color: Black

The Hanna Instruments HI 98129 is a multi-parameter tester that measures pH, electro-conductivity (EC), total dissolved solids (TDS), and temperature, and features automatic temperature compensation (ATC), an LCD screen, automatic shut-off, and a waterproof body that floats in water. The tester automatically compensates for the effects of temperature when taking pH and EC/TDS readings, so additional measurements and manual temperature entries are unnecessary. The HI 98129 meter has a replaceable pH electrode with an extendable cloth junction, and an EC/TDS graphite electrode that is resistant to salts and other corrosives. These features extend the life of the meter by allowing for replacement of the electrodes. Calibration is automatic at one or two points, with two sets of memorized buffer values (pH 4.01/7.01/10.01 or 4.01/6.86/9.18). The EC/TDS conversion factor and temperature compensation coefficient (&Beta) is user-selectable. The tester functions in temperatures of 0.0 to 60.0 degrees C/32.0 to 140...

Manufacturer: Etekcity Brand: Etekcity Model: PH-2011+ Color: Yellow

Improved pH Accuracy Etekcity's improved model, pH-2011+ provides more reliable accuracy and durability for testing the acidity or alkalinity of liquids. It is very easy to use - just immerse the electrode and the readings are automatically displayed. With a resolution of 0.01pH and a 0.05pH range of error, you may get higher accuracy than other pH meters. The electrode is designed with more durability in order to offer a longer product lifetime even through heavy use. Affordable, Practical & Easy to Use With a standard measuring range of 0-14 pH, the pH 2011+ is great for a wide range of tasks. An affordable way to test your swimming pool, aquarium, tap water, or appliance water source, you can finally know whether the water you are drinking or using is acceptable for the application. It is also an excellent choice for basic measurements in a laboratory setting, making it an ideal choice for students taking chemistry or biology classes. Specifications: Measuring range: 0.00-14.00 pH Resolution: 0.01 pH A...

Manufacturer: Dr.meter Brand: Dr.meter Color: High Accuracy pH Meter

Dr.meter - Ultimate Measure for Accuracy The Dr.Meter pH-100 is a handheld, accurate pH meter that measures pH value of water or solution. It has been widely used in the realm of hydroponics, education, water treatment, and swimming pools. This meter has ATC(automatic temperature compensation) for accurate readings in fluctuating temperatures. Specifications: -Measuring range: 0-14 pH -Resolution: 0.01 -Batteries: 4x 1.5V LR44 button cell (AG13) -Working temperature: 0-50°C (32-122°F) -Weight: 88g Package includes: - 1 x pH Meter - 1 x Carrying case - 6 x Calibration packet - 1 x User manual - 1 x Warranty card - 4 x button cell - 1 x Warranty card Warranty:30 Days Money Back; 12 Month Free Exchange

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98103

The Hanna Instruments HI 98103 is a compact pH tester with a narrow probe for use in small samples or test tubes, and has manual two-point calibration, a single-line LCD screen, a replaceable electrode, and low power demand. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The single-line LCD screen of this meter shows the current measurement. The meter has manual temperature compensation and manual two-point calibration through trimmers on the top. Two 1.5V AA batteries provide approximately 3000 hours of use. The meter also comes with an HI 1270 pH electrode and instructions. Specifications pH range0.0 to 14.0pH resolution.01pH accuracy+ or - .2Operating temperature-5 to 50 degrees C (23 to 122 degrees F)Operating relative humidity95 percentDimensions66 x 50 x 25mm/2.6 x 2.0 x 1.0 inches (H x W x D)Meter weight without probe50g/1.8oz.H is height, the vertical distance from lowest to highest point; W is width, the ...

Manufacturer: BFG Supply Brand: Milwaukee Model: MW102

MW102 Standard Portable pH / Temperature Meter Standard portable meters with no frills! Milwaukee’s low cost durable meters for quick and reliable measurements. Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. MW102 is a microprocessor based pH/Temperature meter with extended range (-2.00 to 16.00 pH), Automatic Temperature Compensation, automatic calibration in 2 points and ±0.02 pH accuracy. The meter is supplied with pH electrode and calibration solutions. MW102 is supplied complete with a SE220 pH electrode, MA830R stainless steel temperature probe, pH 4.01 and pH 7.01 20 mL sachet of calibration solution, 9V battery and instructions.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98103B

The Hanna Instruments HI 98103B is a hand-held pH meter with manual two-point calibration, a replaceable electrode, and an LCD screen. The meter provides readings from 0.00 to 14.00 pH (+ or - 0.2), with a resolution of 0.01 pH. It is designed for beer and beverage making, but can be used for other applications; it is an alternative to litmus paper. The HI 98103B operates from 0 to 50 degrees C (32 to 122 degrees F) with maximum relative humidity (RH) of 95%. The HI 1270 electrode is replaceable to prolong the life of the meter. Two 1.5V batteries are included, and provide approximately 3,000 hours of continuous use. The meter measures 66 x 50 x 25 mm/2.6 x 2.0 x 1.0 inches (H x W x D) and weighs 50 g (1.8 oz.). (H is the vertical distance from lowest to highest point; W is the horizontal distance from left to right; D is the horizontal distance from front to back.) Buffer solutions (4.01, 7.01, and 10.01 pH), storage solution (HI 70300M), and replacement electrode (HI 1270) are sold separately. A pH meter, ...

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98107

The HI 98107 pHep pH Tester is a portable pH meter with a replaceable electrode and a non-clogging, replenishable fiber junction. Featuring a large easy-to-read LCD screen, the tester provides fast and accurate pH readings in a rugged and ergonomically designed casing. The HI 98107 has a replaceable electrode and renewable reference junction, which helps prolong the life of this tester. With the replenishable junction, simply pull 1 to 2mm (1/8'') of the junction out with tweezers to recondition the pH electrode. This procedure can be repeated up to 15 times, before the whole fiber is removed. The HI 98107 tester functions in temperatures of 0 to 50 degrees C (32 to 122 degrees F), and has a range of pH 0.0 to 14.0 (+ or - 0.1 pH) with a resolution of 0.1 pH. It is calibrated manually to 2 points. The HI98107 is an updated version of the HI96107 (pHep) pH meter. The dimensions are 175 x 41 x 23 mm (6.9 x 1.6 x 0.9") and the weight is 95g (3.4 oz.). pH testers measure the acidity or alkalinity of a substance...