Kegco KC LH-54S-1 Premium Pro Series Single Product Secondary Regulator, Chrome

Manufacturer: Kegco Brand: Kegco Model: KC LH-54S-2 Color: Chrome

The Kegco LH-54S-2 Pro Series Two Product Secondary Regulator is built with high end features. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank at different pressures. A secondary regulator will allow you to lower the pressure to each keg individually. You still need a primary regulator that then connects to the secondary with a piece of air line. Each secondary regulator has its own shut off valve and pressure adjustment knob, allowing you to set two different pressures on two different kegs and release the pressure from any one of the kegs. Secondary regulators are best mounted to a wall or the inside of the refrigerator.

Manufacturer: Kegco Brand: Kegco Model: KC LH-54S-3 Color: Chrome

The Kegco LH-54S-3 Premium Pro Series Three Product Secondary Regulator is built with high end features. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank at different pressures. A secondary regulator will allow you to lower the pressure to each keg individually. You still need a primary regulator that then connects to the secondary with a piece of air line. Each secondary regulator has its own shut off valve and pressure adjustment knob, allowing you to set three different pressures on three different kegs and release the pressure from any one of the kegs. Secondary regulators are best mounted to a wall or the inside of the refrigerator.

Manufacturer: Taprite Brand: Taprite Color: Brass

You can use this regulator on any Co2 Tank with a CGA-320 valve. Co2 tanks have a male thread (CGA-320), these regulators have a female thread. Single Gauge Regulators Measure PSI (Pounds Per Square Inch) only. The screw in the center is used to adjust the output pressure.

Manufacturer: KegWorks® Brand: KegWorks Color: Walnut

Stop wasting time and money getting your kegs confused when you pour a pint. Instead, install this chalkboard tap handle in your draft setup and you'll never have a sudsy screw-up again! Solid walnut construction and a genuine chalkboard face ensure that this tap handle will be around for the long haul. Just use the regular chalk or the included fine-tip chalk markers to accurately label your tap. When the keg's kicked, just wipe the chalkboard clean and start over. It's that easy. Never forget what's on tap again. Get your Tap Board tap handle today! *Please note: For best results, write on this tap handle with regular chalk or the included chalk markers.*. In stock and ready to ship. Features: Made of fine walnut with a chalkboard surface. Easy to write on and erase. Saves time and money. Allows you to use the same tap handle for every keg. Fits all US faucet lever threads. . . Specs: TapBoard: Overall Height: 7.5". Square Face: 3.25". Square Face Thickness: 1.125". Threads: 3/8"-16 UNC (Unified Coarse Thre...

Manufacturer: Kegco Brand: Kegco Model: KC DP-125 Color: Stainless Steel

This surface mount drip tray is constructed of 100% stainless steel. This drip tray comes with a detachable grill for easy cleaning. This drip tray does not come with a drain which makes it very popular for kegerators or bar applications where running a drain will be difficult.

Manufacturer: Miir Water Bottles Brand: MiiR Model: 500274 Color: Black

The MiiR tumbler's double-wall insulation keeps your coffee and cocoa hot with an easy-to-use press-on lid. After being this stylish, you'll never want a paper cup again. Constructed of premium medical grade stainless steel it fits perfectly in a cup holder. To top things off, MiiR provides one person in need with access to clean water for every tumbler purchased, and they prove it with their unique impact bracelet. By registering the unique code on your bracelet you earn GPS coordinates and photos of the well project you helped fund. Well done.

Manufacturer: Kegco Brand: Kegco Model: KC LH-54S-4 Color: Chrome

The Kegco LH-54S-4 Premium Pro Series Four Product Secondary Regulator is built with high end features. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank at different pressures. A secondary regulator will allow you to lower the pressure to each keg individually. You still need a primary regulator that then connects to the secondary with a piece of air line. Each secondary regulator has its own shut off valve and pressure adjustment knob, allowing you to set four different pressures on four different kegs and release the pressure from any one of the kegs. Secondary regulators are best mounted to a wall or the inside of the refrigerator.

Manufacturer: Shock Top Brewery Brand: Shock Top Brewery Color: Multi

Measures 12.25 inches tall. Features the Shock Top Raspberry Wheat logo. A shock is a bundle of wheat and is represented on tap handle imagery by the orange with the wheat head, or "shock top." Resin construction.

Brand: Matts Taps Color: Cherry

Awesome MLB custom beer tap! Standing about 8" tall, this medium size pub style baseball tap will be a great fit in your home bar. Handmade from all new materials, its the perfect addition to your home bar, mancave, office, or collections. Great gift for the fan in your life or the home brewer. Make your home sportsbar stand out with this unique tap.