12" X 5" SS Draft Beer Drip Tray , Kegerator, Countertop, Surface Mount - No Drain

Manufacturer: Simply Green Solutions Brand: Simply Green Solutions Color: Matte Black

64oz. Capacity, Double Wall 18/8 Stainless Steel, Vacuum Insulated Copper Lined Beer Growler. Matte Finish Exterior Body, with Threaded Insluated Carry Handle Lid. For Hot or Cold Beverages. BPA Free Surgeon General Alcohol Warning Label is laser etched on the bottom of the growler.

Brand: The Brewers Corner

Brand: Chill Passion Inc. Color: Chrome

This air distributor allows the CO2 side to be split 3 ways. It has three threaded mfl outlets with shutoffs and check valves.

Manufacturer: Kegco Brand: Kegco Model: SEDP-220D Color: Stainless Steel

This is a beautiful stainless steel flush mount drip tray. This drip tray will give your bar that professional look and feel. You will have to cut out a large hole in your bar for this tray to mount properly. This drip tray is 12" long by 5" wide and 3/4" deep. The flange is 1/2" all around.

Brand: Matts Classic Collectibles Color: Black

Awesome Star Wars custom beer tap! Standing almost 12" tall, this full size pub style tap will be a great fit in your home bar. Need to open a bottle? The themed bottle opener is attached with magnets for easy removal and replacement. This is the perfect addition to your home bar, mancave, office, or collections. Great gift for the fan in your life or the home brewer. Make your home bar stand out with this unique tap.

Manufacturer: UP100® Brand: UP100® Color: Stainless Steel

It's never been easier to dispense both store bought beer and your own home brew off of the same system. This Sankey to ball lock keg coupler adapter set allows you to switch your lines between commercial kegs and Cornelius home-brew kegs in seconds. It's as simple as screwing the conversion fittings onto your Sankey coupler and then installing your ball lock couplers on the posts. There are many advantages to this beyond just being able to switch back and forth between Sanke kegs and Corny Kegs. Probably the biggest advantage is you don't have to mess with the tubing connections like you would on a standard Sanke conversion kit. Also, you don't have to continually tap and untap the Sanke keg when switching back and forth. These Sankey to ball lock disconnects are the best solution for dispensing several beers you have on tap, at once.

Manufacturer: Taprite Brand: Taprite Color: Blue

This Taprite 742BF Commercial Grade Double Gauge Co2 Kegerator Regulator is built to last and loaded with commercial grade features! The commercial regulator works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn handle in the center is used to easily adjust the output pressure.The commercial double gauge Co2 regulator has a forged brass body. This regulator also features a non-adjustable safety blow off at 55-65 PSI, a flow control inlet nipple filter and a permanent Quad-Ring inlet seal on the primary gauge. This regulator features a larger valve body for higher flow. What makes this regulator special is its check valve that prevents backflow of liquids into the regulator. In addition, the flow control on this regulator is automatic, which means that it automatically adjusts the pressure. This is the industry standard found in most comme...

Manufacturer: signature Glassware Brand: KING Model: 3.6L

INCLUDES: (1) NEW 3.6 Liter Stainless Steel Growler Gas relief Screw on Cap with Rubber Seal.

Manufacturer: Kool Collectibles Brand: Kool Collectibles Color: Brown, Black, Chrome, Tan, White

This is a solid resin beer tap handle of a Zombie Arm. This was hand-painted and measures approximately 11 inches tall, and 2.75 inches wide. This will fit standard US faucets. The base in the photo is NOT included