Stella Artois 11' Inch Draft Beer Tap Handle

Manufacturer: JockeyBox.com Brand: JockeyBox.com Model: COIL-50SS38F Color: Stainless Steel

Build your own Jockey Box, HERMS or RIMS Brewing System, or DIY Distilling Condensing Snake! This 50' stainless steel coil features a 3/8" outside diameter and is made with food grade 304ss material. A 3/8" outside diameter allows you to tap beer at a lower pressure for a perfect pour. Coils with smaller diameters (such as 5/16" or 1/4") require higher tap pressure, resulting in foamy inconsistent pours. Stainless steel coils are preferable over cold plates because the coils are longer allowing more time for the beer to chill. Includes: One 3/8" OD 50' stainless steel coil with two stainless steel ferrules, two rubber cone washers and two standard beer hex nut (7/8" x 14) fittings.

Manufacturer: Kegco Brand: Kegco Model: KC YH-761 Color: Chrome

The Kegco 761 single gauge commercial grade regulator is NSF approved to consistently deliver peak performance even in rigorous commercial environments. It's sturdy construction ensures consistent flow pour after pour and it features a T-Style adjustment valve which makes it easy to adjust the pressure inside the keg. The single gauge on the regulator indicates how much Co2 pressure is inside the keg and a pressure release valve is conveniently located on the regulator body.

Brand: The Weekend Brewer Color: MFL

This aluminum air distributor allows the CO2 side to be split 3 ways. It has three MFL threaded check valves. The check valves are one way valves; they will prevent gas or liquid backflow. This unit will require gas line tubing, swivel nuts and hose clamps (not included).

Manufacturer: AMCYL Brand: AMCYL Model: CKN5INX-SH Color: Stainless Steel

New 5 gallon stainless steel ball lock keg with single handle, rubber boot bottom, and integrated pressure relief. AMCYL brand. Important warranty information: All kegs are designed to food-safe NSF standards. Kegs can be fully cleaned without disassembly. If you disassemble your keg you void the manufacturer's warranty and may damage the keg. Clean your keg without disassembly by running sanitizer through it as you would to dispense beer. Rinse thoroughly afterwards. If you choose to disassemble your keg, do not use power tools. Post removal by any method can gall stainless steel. Remove posts slowly; if tension is felt screw the post back in before backing off again. Keg posts have an O-ring seal. Very little tension is required to reseal.

Manufacturer: MicroMatic Brand: Micro Matic Color: Chrome

Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually. Features: 1 pressure, forged brass body, chrome plated finish, nickel-plated valve seats for high corrosion resistance, constant pressure supply at high output flow rates, easy to use dial knob for pressure adjustment.

Brand: Matts Classic Collectibles Color: Black

Awesome Star Wars custom beer tap! Standing almost 12" tall, this full size pub style tap will be a great fit in your home bar. Need to open a bottle? The themed bottle opener is attached with magnets for easy removal and replacement. This is the perfect addition to your home bar, mancave, office, or collections. Great gift for the fan in your life or the home brewer. Make your home bar stand out with this unique tap.

Manufacturer: Tap That Handles Brand: Tap That Handles Color: Brown

WELCOME SPORTS FANS!!! This is a Los Angeles Dodgers Model Beer Tap Handle *****CUSTOM MLB BASEBALL BEER TAP HANDLE***** This Tap Looks Great in any Sports Bar or at any Home Party!!!!! DIMENSION: Approximately 12" Tall / 3" Wide COMPOSITION: Expertly Crafted Product with ALL of Your Favorite MLB Team Logos!!!! CONDITION: NEW!!!!! NO DAMAGE OF ANY KIND!!!! You Are Viewing a Unique Sports Inspired Collectible Beer Tap Handle!!!!! ALL OF OUR PRODUCTS HAVE:****NO DAMAGE****NO CHIPS****NO SCRATCHES****NO SCUFFS****NO CUTS****NO SCRAPES THIS IS A RARE ITEM THAT IS HARD TO FIND!!!! DO YOU HAVE A BAR OR A RECREATIONAL ROOM??? DECORATE IT IN STYLE WITH THIS BEAUTIFUL TAP

Manufacturer: Oetiker Brand: Oetiker Color: Silver

The Oetiker Clamp is the best size Clamp for attaching hoses. The entire inner circumference of clamp is completely free of any steps, gaps or bridges for no-leak seals.

Manufacturer: Home Brew Stuff Brand: Home Brew Stuff Model: HBS-ADKK-N Color: Multicolor

Your Draft Beer system is waiting... Having fresh beer on tap can not only be a reality, it is seriously cool! Setting up your own kegerator system at home is easier than you thought, HomeBrewStuff kits make setup a snap by including everything you need for a variety of installations from converting that old garage sale refrigerator, to full on multiple tap bar setups. All of our components are heavy duty commercial quality and built to last. Everything is included right down to the last hose clamp, in addition, everything is backed by our dedicated customer service team who is available to help with any questions. If you have a custom installation, need something special, or just need help picking the right system, give us a call. Our customer support number is 208-375-2559. With This Kit you can... ...add an additional tap to your draft beer dispenser. The commercial Sankey keg tap matches most domestic and craft beer kegs sold in the US. All hoses, accessories, and instructions that you will need are...