COLE PARMER 35634-30 Waterproof pH Tester

Manufacturer: Hydro Brand: Hydro

precisely calibrated to yield reliable readings;Quart

Manufacturer: Ricca Chemical Brand: Ricca Chemical Model: 149516

Ricca Chemical Company 1495-16 Buffer, Reference Standard, pH 3.00, 500 mL is intended for standardization of pH meters. The specification on Ricca Buffer, pH 3.00 is plus-or-minus 0.01 at 25 degrees Celsius. Ricca does not use formaldehyde or mercury compounds as preservatives, or chromium compounds as colorants, making our buffers safer to use and easier to dispose of. This buffer is certified traceable to NIST Standard Reference Material, lot numbered and expiration dated.

Manufacturer: Testo AG Brand: Testo Model: 0563 2065

Testo pH measuring instrument for fast checks on liquids. The combination of pH immersion tip and temperature probe for fast and efficient temperature compensation is unique. The Testo pH probe is leak-proof, maintenance-free, robust and not affected by dirt thanks to the large volume of gel electrolyte and the dual wall diaphragm. Testo 206-pH1 starter set include one-hand pH/degree C measuring instrument, pH1 probe head for liquids, storage cap with gel, calibration dosing bottles 250 ml pH 4+7, TopSafe, belt/wall holder and aluminium case. Probe type: pH. Measuring range: 0 to 14 pH. Accuracy +/-1 digit. +/-0.02 pH. Resolution: 0.01 pH. Operating temperature: 0 to +60 degree C. Storage temperature: -20 to 70 degree C. Battery life: 80 h (Auto Off 10 min). No measuring channels: 2 channel. Automatic temperature compensation. Measuring rate: 2 measurements per second. Battery type: 1x CR2032. Material/housing: ABS with TopSafe, Protection type IP 68. Display: LCD, 2 lines. Measures 197mm length by 33mm width...

Manufacturer: Testo AG Brand: Testo Model: 0563 2061

Testo pH measuring instrument for fast checks on liquids. Maintenance-free gel electrolyte. Automatic full-scale value recognition. Built-in temperature probe. TopSafe: Robust, water-tight, hygienic and dishwasher-proof protection case (IP68). 1, 2 or 3 point calibration possible. Measuring range: 0 to 14 pH. Accuracy: +/- 0.02 pH, +/-1 digit. Resolution: 0.01 pH. Sensor type: pH electrode. Battery life 80 hours. One-hand pH/degree C measuring instrument, pH1 probe head for liquids, storage cap with gel, TopSafe and belt/wall holder.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

General-purpose single-junction electrodes are economical yet accurate. Can be used for measurements up to pH 13. Maximum pressure is 150 psi at 25°>C. Note: 100Ω RTD ATC elements are platinum and conform to DIN curve 43760. ATC connector is miniature audio plug. Connector for the 1 kΩ RTD and the 3 kΩ Balco ATC elements is a spade lug. Connector for 100 kΩ thermistor ATC elements is a standard 1/4" phone plug.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

Milwaukee MW302 LED Economy Portable Conductivity EC Meter with 1 Point Manual Calibration, 0 to 10.00 milliSiemens/cm, 0.1 milliSiemens/cm Resolution, 2 percent Accuracy is suitable for varied industrial needs.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

Milwaukee MW500 LED Economy Portable ORP Meter with Platinum Electrode, +/-1000mV, 1mV Resolution, +/-5mV Accuracy is simple and convenient to use.

Manufacturer: Bio Logic Brand: BioLogic Model: 8900

Proper pH levels can make all the difference to the success of a food plot. The correct balance will unlock each plant's ability to utilize soil minerals and nutrients, producing an ideal crop. The New BioLogic Digital pH Meter allows the food plot planter the opportunity to test and evaluate the pH level at each site by inserting the probe into the moist soil and reading the meter.

Manufacturer: General Tools Brand: General Tools Model: PH501

' pH Meter, Application Ideal For Cooling Towers, Features Digital Display, Pocket Sized, Automatic Temperature Compensation, Lightweight, Includes Hard Carrying Case, Calibration Solution, Calibration Screwdriver, Battery, Manufacturers Warranty Length 1 Year '