PET Plastic Carboy 5 gallon with bored plastic bung by Ritchies

Manufacturer: World Marketing Brand: World Marketing

Kozy World Electric Log Set w/reflector panel

Manufacturer: MSS Brand: MSS

Blichmann WineEasy 20 Gallon Fermentor

Manufacturer: Finish Brand: Finish

Please Note: Product received may temporarily differ from image shown due to packaging update.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Original Dwyer® Magnehelic® gage for high accuracy - guaranteed within 2% of full scale - and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures - either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The Magnehelic® gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment. (Standard model shown in picture.)

Manufacturer: stir-plate Brand: Stir-Plate Model: EB-120V Color: Black

Our controller can be used by itself to boil up to 5 - 6 gallons of wort but time to boil will be about 55 minutes. A much better use would be to use this controller & an electric heating element together with your electric stove top or a second 120V element plugged into another 20 Amp circuit to bring from 5 to 12 gallons to a boil. Features: Designed to control your rate of boil - no temperature feedback. 6', 14 Gauge, 3 wire heavy duty power cord. Water resistant housing. Full linear control. Low cost compared to other solutions. Controls up to a 2250 Watt electric heating element Simple, easy to use design - just plug in and use.

Manufacturer: FASTFERMENT Brand: FastFerment Model: FFT Color: White

The fast ferment is the only conical fermenter with a collection capsule at the base. With the collection capsule, you will be able to take sediment or trub from the bottom -- no more racking. If you're making wine, you can either bottle or filter directly from the unit. If you're making beer, you can prime the beer through the opening on the top, open the valve and bottle. Or just open the valve and run the line into your keg. Capacity is 7.9 gallons. Please note that this Fast Ferment is a wall-mounted unit and needs to be installed on a concrete wall or anchored into wooden (not metal) studs. Wall mount is included. Does not include floor stand.

Brand: Zatoba Color: Clear

20 platinum cure silicong grommets, food safe, high quality and durable for use with mason jar fermenting systems. Fits standard airlock (3/8" center hole).

Manufacturer: stir-plate Brand: Stir-Plate Model: 240VBP_EL Color: Silver

This kit comes complete with: 1 - 6' 3 wire 30 amp power cord with 3 prong twist lock plug end and equipment end pre-terminated with the correct ring terminals. 1 - 5500 watt CAMCO style folded over style ultra low watt density water heater element. 1 - Soft silicone water heater element gasket - works better than O-ring or the original style neoprene gasket. 1 - Metal box suitable for wet locations, with hole pre-drilled in the back for your electric heating element. 1 - Metal box lid with gasket and screws, suitable for wet locations. 1 - Water resistant fitting to hold the power cord in place. 1 - 1 inch pipe size stainless steel nut to hold your water heater element in from the inside

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series 616KD Differential Pressure Transmitters with One-Touch® technology are designed for simplicity making them the ideal choice for installers and maintenance professionals. The One-Touch® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional t...