Our Brass Weld Ferrule's are an inch in length and are perfect for soldering, brazing or welding to any 2" copper distilling column to mate to your keg or boiler. Other ferrules that are made of copper floating around the Internet fit the inside diameter of the copper pipe and since every type of copper has a different inside diameter they fit only one type which is the thinnest copper available DWV pipe. Our ferrules are superior because they fit on the outside diameter of 2" copper and since the outside diameter of copper types M, L, K, and DWV are all the same ours will fit ALL types of 2" copper pipe.
Fits ALL types of 2" copper pipe
No special welding skills needed for installation
Attaches to the outside diameter of your copper pipe
Proven superior design that works well
Product Information Specifications for Moonshine Still Superior 2" Brass Tri-Clamp Ferrule Tri Clover Reflux Column Not Stainless Below:
This Dixon B7RMP series clamp reducing tee sanitary fitting is made of stainless steel 316L and clamps to tubing on all three ends. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. â€œA" and â€œB" indicate the main run on the fitting, and â€œC" indicates the branch. The branch on this fitting has a reduced diameter from the main run and it has clamped connections for a non-permanent seal, providing take down access. This fitting is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This clamp reducing tee sanitary fitting meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621) and is suitable for use ...
This Dixon B2KS series 45-degree polished weld long elbow with tangent sanitary fitting is made of stainless steel 316L and welds to tubing on both ends. This elbow fitting welds to tubes at a 45-degree angle to change the direction of flow between pipes or tubes. This fitting has tangents, or straight ends, to provide aligned welding and is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. The lower carbon content of the material minimizes harmful carbide precipitation due to welding. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 45-degree polished weld long elbow with tangent sanitary fitting meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621) and is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the di...
This economical 5-gallon stainless steel brewing pot works well for extract brewing and is an affordable option for brewer who?s just getting started with this hobby. Size allows you to add more water to your boil and still have room to catch messy boil overs before they happen.
Beer Growler 67 oz Stainless Steel & Secure Lid Fresh with Swing Top Lid By MakExpress
This High Quality Beer Growler is made from Strong Stainless Steel Material. It can hold 67 ounces of fresh tasty beer. It has an attached swing top which ensures that the taste and freshness of the beer is long lasting. It can be easily cleaned and washed. It is excellent for carrying Beer, Water or any other cold beverages. Thus making it very easy to use.
SABCO's Kettle Klimber is simply the best platform step we've ever seen.Â Check out these features: Step has an EXTRA Large 14.5" x 19" platform. Provides a Full 8" Boost and Can Be Used as a 3"Â Mat Durable All-Aluminum Welded Construction. Folds Flat to 3" and is a Lightweight ( 6 lbs ) for Ease of Mobility andÂ Storage Kettle Klimber'sÂ Anti-tip Design Prevents the EXTRA Large Folding Safety Step from Tipping During NormalÂ Use Legs Lock Securely into Place to Prevent Step fromÂ Collapsing Black Powder Coat Finish Platform has non-slip strips and custom rubber leg tips. Kettle Klimber is Lab Tested to Hold 1,000Â Pounds! A must for the Brew-Magic V350 System!Â Take a look at Dan as he demonstrates Kettle Klimber's overall stability.Â (See attached photos)Â Note how he can stand on the corner and not cause the Kettle Klimber to tip or lose footing. This is a brewing safety-smart accessory for your Brew-Magic System or for any homebrew or household need. A great gift for any brewing ...
Kissemoji Home Brew Complete Starter DIY Kit Comes with everything you need to create your own weld less brew kettle. -This Listing includes the DIY kit only, kettle not included Kit Includes: 1pc 1/2" Ball Valve 1pc 3" Glass Thermometer 1pc 1/2" Barbed Hose Fitting 2pc 1/2" Weldless Bulkhead Fitting 1pc 1/2" Nipple Fitting Teflon Tape 1/2" Hole Drill Bit Material: All Parts are made from Commercial Quality 18/10 Stainless Steels, Fully Polished. All Accessories are made of quality 304 Stainless Steel with the exception of the barbed hose which is made from higher quality 316 Stainless Steel. Easy to assemble and remove weld less fittings allows for easy cleaning. Every hardware you need to assemble your own brew kettle is included, so all you need is a electric drill and drilling oil to get started.
HomeBrewStuff Stainless Steel Sanitary Male Threaded Pipe Fitting to Tri Clamp Clover (50.5mm Ferrule)
Manufacturer: Home Brew Stuff
Brand: Home Brew Stuff
Color: Stainless Steel
The Homebrew Stuff Sanitary Hose Barb Pipe Fitting to Tri Clamp Clover Sanitary hose connections just like the professional breweries use. 2" (actual) diameter disc on two fittings are clamped together with a high temp silicone gasket in between, providing a clean efficient connection for valves, hoses, etc. Fittings are all 304 Stainless steel. 1/2" Hose Barb x 1 1/2" Sanitary Clamp Please check our other Homebrew Stuff listings for more accessory parts.
This Dixon B32W series polished weld eccentric reducer sanitary fitting is made of stainless steel 304 and welds to tubing on both ends. This eccentric reducer fitting welds to two pipes or tubes of different diameters that are not along the same pipe axis. It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This polished weld eccentric reducer sanitary fitting meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621) and is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, fi...