2.5 out of 5 stars with 2 reviews
Oakton WD-35613-52 pH 5+ Handheld Meter with pH Probe
List Price
$286.76
Our Price
$252.35
Savings
12% OFF
* Pricing Information Updated Less Then A Minute Ago
The microprocessor-based pH 5+ meter is OAKTON’s most economical portable pH meter, yet it gives you the same high accuracy and reliability of our other portable meters! Use this meter to take routine pH and temperature measurements. Meter includes a protective rubber boot that also acts as a meter stand. |
-
Reads pH and temperature
-
Automatic Temperature Compensation (ATC)
-
All push button operation
-
Three-point pH calibration
-
Auto buffer recognition
Product Information Specifications for Oakton WD-35613-52 pH 5+ Handheld Meter with pH Probe Below:
Manufacturer | OAKTON INSTRUMENTS |
Brand | Oakton |
Model | WD-35613-52 |
Package Weight | 1.2 pounds |
Package Size | 6.5 x 3.2 x 3.2 inches |
Units in Package | 1 |
2.0 Stars
2 Reviews
2.0 Stars
2 Reviews
2.0 Stars
2 Reviews
1.5 Stars
2 Reviews
$90.94 (16% Off)
1.0 Stars
2 Reviews
$216.72 (2% Off)
1.0 Stars
2 Reviews
$57.55 (0% Off)
5.0 Stars
1 Reviews
5.0 Stars
1 Reviews
$118.80 (1% Off)
5.0 Stars
1 Reviews
$37.93 (16% Off)
Digital Ph Meter + TDS Tester Aquarium Pool Hydroponic Water Monitor 0-9999 PPM
Manufacturer: Luckystone
Brand: Luckystone
Model: PH-009(I)
This digital pen style pH meter is an ideal instrument for any aquarium, the fishing industry, swimming pools, school laboratories, food & beverage etc.
This Digital TDS Water Quality Tester is ideal for all basic water testing applications. This product is highly efficient and accurate due to its advanced microprocessor technology. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Ranges between 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
Package Contents:
1 X PH meter
1 X calibration screwdriver
1 X PH meter Manual
1 X TDS Meter
1 X calibration screwdriver
1 X TDS Meter Manual
Digital Water Quality Monitor Swimming Spa Pool PH CL2 Chlorine Level Tester (Water tester)
Manufacturer: Everpoint
Brand: Everpoint
Color: Water tester
Featuer:
Quite an essential tool for swimming pool and spa.
Ideal for simple operations to test water PH and CL2, no more chemicals or no more guess work.
Large screen shows the test result on both PH and Chlorine level for easy reading.
No chemical agent needed, easy to use it.
Easy to use and obtain result instantly and accurately.
Recommended Chlorine Level for pools and spas is 1.2 to 1.7 ppm.
Recommended PH Level for pools and spas is 7.2 to 7.8.
You can save time and money with this electro-tester.
Light weight and easy to carry around.
Note:Do not immerse the probe in any liquid other than pool or spa water.
Specification: Power supply: 1 * AA battery (not included) Item size: 18x11.6x3.1cm/7.09x4.57x1.22inches Weight:242g/8.47ounces
Package content: 1 x Water PH/CL2 Tester
PH-037 Completely Waterproof Pocket Size Pen-type pH Acidimeter Meter Tester Water Hydro Quality Precision Tester
Manufacturer: LuckyStone
Brand: LuckyStone
Model: PH-037
Features: 1. Operating Temperature: 0~50℃ 2. Power: 4 x 1.5V Batteries(AG-13 Button Battery) 3. Dimensions:17.5 x 3 x 2.2cm 4. With pen type waterproof design, this PH meter is easy to handle and simple to store 5. A large LCD display is incorporated giving clear and precise results 6. This PH meter can instantly test your liquid for acid or alkaline 7. Accurate results every time, tester is easy to calibrate at home for making adjustments when necessary 8. Deal instrument for aquarium, fishing industry, swimming pool, school, laboratory, food & beverage etc. Package Includes: 1 x Waterproof pH Meter 1 x Manual
Oakton Waterproof pHTestr 10 BNC Pocket pH Tester
Manufacturer: Thermo Scientific
Brand: Oakton
Model: WD-35634-14
The Oakton 35634-14 pH10 BNC pocket pH Tester is a handheld, waterproof, and dustproof meter that floats, if dropped in liquid. A portable meter is commonly used to measure the pH of substance such as food, beer or wine, and is also used to test cleaning water, rinse water and wastewater in lab, industrial and food applications. This meter has three-point, push-button calibration with auto-buffer recognition of US and National Institute of Standards and Technology (NIST) standards for a wide range of results. The meter’s waterproof and dustproof housing is Ingress Protection (IP) 67-rated for protection against solid objects or liquids. It has a large, upright, four-digit LCD screen for ease of viewing. Its tactile keypad shows self-diagnostic error messages, comes with a hold function which freezes readings for recording, a battery indicator, and an auto shut-off that turns off the meter after 8.5 minutes of nonuse to extend battery life. It comes with a protective, plastic storage case, and lanyard. ...
Hanna Checker Digital Ph Meter
Manufacturer: E.C. Kraus
Brand: E.C. Kraus
(Ph410) This Hand-Held, Pocket Ph Meter Is Perfect For Taking Quick, Accurate Readings Of Both Wine And Beer. It Will Read All Ph Levels From 0.0 To 14.0. Hanna Model: Hi 98103.Quick & Accurate: In Just A Few Short Seconds You Can Take Readings That Are Accurate Down To The Tenth Of A Ph.Portable: It`S Completely Portable. Runs On Two 1.5 Volt Batteries (Included) That Will Last For Approximately 3,000 Hours Of Operation Time.Easy Calibration: This Unit Comes With A Calibration Kit For Easy, Two-Point Calibration -- Good For One Calibration. You Can Purchase Additional Calibration Kits.
Hanna Instruments HI 991003N pH/pH-mV/ORP/Temperature meter, with Extended Range
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI991003
The Hanna Instruments HI 991003 is a waterproof, portable pH, pH-mV, oxygen reduction potential (ORP)/mV, and temperature meter used in water treatment applications with Automatic Temperature Compensation (ATC), automatic calibration at one or two points, a multilevel LCD screen, a pre-amplified pH/ORP probe with internal temperature sensor, and a battery error prevention system. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. An ORP meter, also known as a redox potential tester, measures the oxidization or reduction capacity of a solution, and monitors chemical reactions and ion activity. The multilevel LCD screen simultaneously displays the current measurement, the current temperature, and tutorial messages. This meter has ATC from -5.0 to 105.0 degrees C (23.0 to 221.0 degrees F) for accurate readings in fluctuating temperatures. The meter also has automatic one-or two-point calibration with two sets of memorize...
Oakton Waterproof ORP Testr 10 BNC Pocket ORP Tester
Manufacturer: COLE-PARMER
Brand: Oakton
ORPTestr® 10 BNC allows you the convenience of using any ORP electrode with a BNC connection. Order electrodes separately. Use this versatile instrument for applications ranging from swimming pool testing to pulp bleaching. Meter features ±2 mV accuracy and a ±150 mV offset. Housing allows you to attach a lanyard (included) for easy retrieval. Additional features include a hold function, auto-off function, self-diagnostic error messages, and a three-segment battery-life indicator. Use with any standard ORP electrode with BNC connector Ideal for checking chromate reduction, cyanide oxidation, and other ORP readings Large, horizontal readout IP67-rated housing floats in water and sits flat on a hard surface
Primo TDS Tester
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
This tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. Operating and routine maintenance is easy. A press of the single button, at the top of the meter, powers it on. Press and hold the button, for a few seconds, to automatically enter the calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by onboard power microprocessor, which automatically turns meter off after 5 minutes of non use
Top Level Categories for Oakton WD-35613-52 pH 5+ Handheld Meter with pH Probe.
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!