This heavy duty immersion chiller is recommended for 10 to 20 gallon batches, but also works well with full 5 gallon boils. It's made from 50 feet of 1/2 inch copper tubing that will easily cool your wort in minutes! High quality brass garden hose fittings are attached, and an instruction sheet is included with information on how to use and care for your wort chiller. This product is proudly made in the USA. Similar chillers retail online for up to $130.
1/2 inch Copper tubing provides increased water throughput to quickly cool larger batches
Elevated coils increase the efficiency of the cooling process
High quality brass garden hose fittings
SS Clamps solidify the structure, and allows for adjustability in the coil spacing and height
Product Information Specifications for Heavy Duty 1/2" x 50' Copper Immersion Wort Chiller Below:
Kissemoji 30 Plate Beer Wort Chiller 7.5"x2.9" Brewing Wort Chiller The wort plate chiller is a highly-efficient device. This chiller is made of 30 plates of 304 stainless steel that have been brazed together with pure copper in an oxygen-free furnace. Water Out/in 3/4" NPT Theaded, Wort Out/in 1/2" NPT Threaded. Product Size: 7.5" x 2.9" (191mm x 73mm) Heat Transfer Area/plate: 0.012m2(0.14ft2) Thickness of plates: 0.3 mm(0.0118") Max Flow Rate: 66.6L/min(17.6gpm) Design Pressure:1.0 Mpa(145 psi) Test Pressure: 2.0 Mpa(290 psi) Refrigeration Capacity: 1-5 KW(3400-17000 BTU/hour)
Brand: Home Brew Stuff
Fits easily into smaller brew kettles. 25' copper tubing. It is important to cool beer (wort) to yeast pitching temperature in the shortest possible time. By putting a wort chiller into a brew kettle at the end of the boil and running cool water through the chiller, it is possible to cool the wort below 80 degrees in 12 to 15 minutes. This reduces the lag time between the boil and active yeast fermentation. This unit comes with the fittings needed to hook up your own garden hoses to the wort chiller.
ETTG Beer Chiller Stick [Pack of 2], Stainless Steel Bottle Wine Beverage Cooler Cooling Sticks You don't need to be a certified wine expert to master the art of wine chilling. All you need is a reliable chiller so you can appreciate every sip of fine wine drinking served at the right temperature. Wine Chiller is designed to aid that purpose! Do you know that improper wine serving temp. is one of the main reasons people say they don't like a particular wine? Wine might not taste as good as you thought if you keep it too long in the refrigerator. A slightly chilled wine tastes the best, and so do selecting the right chiller to fully capture the aroma. BlizeTec 3 in 1 wine chiller allows wine to be kept at the perfect drinking temperature without making it less tasty. A MUST HAVE item for family/friend gathering, special occasions & gift set. Features: â€¢ Sleek Stainless steel chiller tube to enable optimal drinking temperature for up to 30 minutes â€¢ Built in wine aerator allows one to breath the ...
3/8" x 50' Stainless Steel Wort Chiller w/GH Fittings
Manufacturer: NY Brew Supply
Brand: NY Brew Supply
Color: stainless steel
This super efficient immersion chiller is recommended for 5 to 15 gallon batches, and is made from 50 feet of 3/8" stainless steel tubing that will cool your wort in minutes! High quality brass garden hose fittings are attached to 50 feet of 3/8" stainless steel tubing. An instruction sheet is included with information on how to use and care for your wort chiller. This product is proudly made in the USA.
Manufacturer: Transworld Aquatic
Model: 1/4 HP
Aquarium arctica titanium chiller; smart memory chip restores to last set temperature after power failure; digital LED temperature controller can easily be read day or night; quick installation with hose.
Quickly cool your tap water temperature prior to chilling. A pre-chiller is used in hot environments where the tap water temperature exceeds your final target temperature for the cooling wort. The pre-chiller is placed in a bucket of ice water. The idea is that the tap water temperature is cooled before entering your wort chiller. Designed to fit in an ice bucket. Made in the USA with USA copper.
he EcoPlus Chillers are suitable for use in reservoirs, hydroponic systems & fresh or saltwater aquariums. Each chiller provides a high performance titanium heat exchanger for optimum performance and corrosion resistance. High quality made compressor is extremely efficient and reliable. The micro computer with digital LCD display allows for easy operation.
"Garden Hose Chillers This unit has garden hose fittings welded right to the unit for easy adaptation to your cooling water. They can be fit with regular garden hoses or even quick connect fittings to attach to garden hoses. There is one female and one male garden hose fitting on the unit. The female is intended to receive the male fitting from the end of the hose connected to your faucet and the male garden hose fitting for connecting to another hose for the heated water exiting the exchanger. Garden Hose MalexFemale (water) x 1/2"" Hose Barb (wort) Hose barbs welded directly to the heat exchanger unit allow for easy connections to 1/2"" tubing for the beer wort side."