30 Qt Stainless Steel Brew Kettle w/ Lid

Manufacturer: Northern Brewer Brand: EdelmetallTM Color: Copper

Designed to complement the stunning exterior of the Edelmetall Brü® Burner, the leg extensions raise your kettle to 27" while providing the structural rigidity required to support even the heaviest kettles and biggest batches. Equipped with a reinforcing triangle at its base, these copper-clad steel extensions offer unmatched stability even on rough terrain. Take your Edelmetall to new heights and never lift a full brew pot again.

Manufacturer: Living and Giving Brand: Living and Giving Color: siliver

The difference between the silver and black: the silver beer growlers were not Spraied paint; the black ones were Spraied black paint.Made of food grade stainless steel, this is a giant leap forward for craft beer lovers who've grown weary of hassling with traditional glass growlers. A passivated interior is meant to keep 64 ounces of malty goodness or well-hopped heaven tasting just the way the brewer intended. An attached swing top offers long-lasting freshness and ensures you're giving your beer the tender loving care it deserves.Plus, the elegant, easy-to-grip design makes it a hit with both your eyes and your hands. Care Instructions:* Hand wash only with warm water and mild soap (no bleach or abrasive cleaners) * Use only non-metallic bottle brush or bottle sponge * Let dry thoroughly between each use and store with lid open * Do not microwave or freeze * Not designed for hot liquids, nonfood, or caustic, highly acidic materials * Not guaranteed against leakage from above average tap pressure * Use for ...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B7RMP-G300200

This Dixon B7RMP series clamp reducing tee sanitary fitting is made of stainless steel 304 and clamps to tubing on all three ends. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. “A" and “B" indicate the main run on the fitting, and “C" indicates the branch. The branch on this fitting has a reduced diameter from the main run and it has clamped connections for a non-permanent seal, providing take down access. It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This clamp reducing tee sanitary fitting meets 3-A Sanitary Standards Number 63-03 for sanitary fittings (authorization number 621) and is suitable for use in food, beverage, and dairy applications.Pipe and tube fitting...

Manufacturer: Concord Cookware Brand: Concord Cookware

Two Sizes: 13.25" and 15.75" Diameter. Both are about 1" height. Each False Bottom will include 1 ft of all natural silicon tube.

Manufacturer: Concord Cookware Brand: Concord Cookware

Two Sizes: 13.25" and 15.75" Diameter. Both are about 1" height. Each False Bottom will include 1 ft of all natural silicon tube.

Manufacturer: Anvil Brewing Equipment Brand: Anvil Brewing Equipment Model: ANV-DIP-TUBE

Anvil Brewing Equipment dip tube. Includes nut and o-ring. The perfect companion for your Anvil Brewing Equipment kettle ball valve! This ½" diameter dip tube installs quickly without tools to any 1/2" male NPT fitting and can be oriented at any angle. Compatible with the Anvil Brewing Equipment kettle strainer.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B19WB-G100

Unpolished weld adapter. Made of stainless steel 304. 1.750" Length. 1" NPT Male. 1" Tube OD.

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B23BMP-G100

This Dixon B23BMP series thermometer cap sanitary fitting is made of stainless steel 304 and clamps on to the end of a pipe or tube to close the line. This fitting clamps on to the end of a pipe or tube to close the line, providing a non-permanent seal with take-down access, and has a female National Pipe Taper (NPT) threaded opening for a male threaded thermometer (not included). It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This thermometer cap sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range o...

Manufacturer: Dixon Valve & Coupling Brand: Dixon Valve & Coupling Model: B23BMP-G150

This Dixon B23BMP series thermometer cap sanitary fitting is made of stainless steel 304 and clamps on to the end of a pipe or tube to close the line. This fitting clamps on to the end of a pipe or tube to close the line, providing a non-permanent seal with take-down access, and has a female National Pipe Taper (NPT) threaded opening for a male threaded thermometer (not included). It is made of stainless steel 304 for resistance to corrosion and high temperatures and has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This thermometer cap sanitary fitting is suitable for use in food, beverage, and dairy applications.Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range o...