Measuring & Testing - Page 489

Manufacturer: COLE-PARMER Brand: Oakton

ORPTestr® 10 BNC allows you the convenience of using any ORP electrode with a BNC connection. Order electrodes separately. Use this versatile instrument for applications ranging from swimming pool testing to pulp bleaching. Meter features ±2 mV accuracy and a ±150 mV offset. Housing allows you to attach a lanyard (included) for easy retrieval. Additional features include a hold function, auto-off function, self-diagnostic error messages, and a three-segment battery-life indicator. Use with any standard ORP electrode with BNC connector Ideal for checking chromate reduction, cyanide oxidation, and other ORP readings Large, horizontal readout IP67-rated housing floats in water and sits flat on a hard surface

Manufacturer: Hanna Instruments Brand: Hanna Instruments

This tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. Operating and routine maintenance is easy. A press of the single button, at the top of the meter, powers it on. Press and hold the button, for a few seconds, to automatically enter the calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by onboard power microprocessor, which automatically turns meter off after 5 minutes of non use

Manufacturer: Sensorex Brand: Sensorex

The Model C110 Checker/Simulator verifies pH and also incorporates +/- 700 mV outputs to verify ORP/REDOX instruments. This is an ideal unit for full pH and ORP/REDOX field troubleshooting. The compact case uses a water-resistant rubber key pad that feels nice to the touch. Impedance loaded or no load signals may be generated with this unit. Included with the checker is a CX2 interconnect cable with BNC connector. The C110 pH/mV checker simulator is a millivolt source that can be used to calibrate or check the calibration of a pH or ORP (mV) meter. It also serves as a troubleshooting toll when pH or ORP systems fail. For troubleshooting, the electrode is removed and the simulator is connected in its place. The C110 sends a signal to the meter to verify the performance of the meter. Signals of pH4, pH7 and pH10 are available, as well as +/-700mV for ORP. A properly working meter (by process of elimination) indicates that the electrode may be the cause of the failure. It is supplied with a 9V battery which comes installed in the unit.

Manufacturer: Hanna Brand: Hanna Instruments Model: HI-98127-HANNA INSTRUMENTS

Waterproof and designed to float. Automatic Temperature Compensation. Automatic calibration. Tactile grip casings. HOLD function. Automatic shut-off. Efficient two button operation. Temperature in °C or °F. BEPS (Battery Error Prevention System). Battery % displayed at startup. The pHep4 tester is for users that require the greatest accuracy and features while staying economical. This model has BEPS as well as user selectable automatic shut-of, replacable pH electrode cartridg, stability indicator and automatic calibration. Order Information:. HI 98127 (pHep4) is supplied with HI 73127 pH electrod, HI 73128 electrode removal too, batteries and instructions. Specfications: Range pH -2.0 to 16.0 pH. Temperature -5.0 to 60.0°C / 23.0 to 140.0°F. Resolution pH 0.1 pH. Temperature 0.1°C / 0.1°F. Accuracy 20°C pH 0.1 pH. Temperature 0.5°C / 1°F. pH Calibration automati, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18). Temperature Compensation Automatic. Battery Type / Life 1.5V (4) / approximately 300 hours of continuous use; auto-off after 8 minutes of non-use. Environment -5 to 50°C (23 to 122°F); RH max 100%. Length: 8.2. Height: 1.3. Width: 2.7

Manufacturer: iPower Distributor L&G Brand: Future Harvest Development Model: 716365

Nutradip pH Probes are the reliable way to measure acidity in your nutrient solution. The pH Probe is a continuous monitoring pH meter with automatic temperature compensation and dc power built in for portability. Nutradip Probes are engineered for accuracy and durability, helping growers measure and monitor their success for over 15 years.

Manufacturer: Hydrofarm, Inc. Brand: Milwaukee Model: MI10007P

Available in 220ml bottles and 20ml sachets. Traditional buffer solutions are packed in 220ml leak-proof bottles and are recommended for lab application. Sachets are sealed against light and air and are ideal for on-the-spot calibration. Simply open, insert the tester or electrode into the sachet and calibrate. Sachets are sold in boxes of 25 pieces.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

Milwaukee MC110 pH Monitor with Mounting Kit, 0.0 to 14.0 pH, +/-0.2 pH Accuracy, 3.5 to 7.5 pH Set Point is tested for effectiveness.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

Milwaukee MC120 pH Monitor with Mounting Kit, 0.0 to 14.0 pH, +/-0.2 pH Accuracy, 5.5 to 9.5 pH Set Point offers accurate monitoring solutions.

Manufacturer: Hydrofarm, Inc. Brand: Milwaukee Model: MIMA9007

Available in 220ml bottles and 20ml sachets. Traditional buffer solutions are packed in 220ml leak-proof bottles and are recommended for lab application. Sachets are sealed against light and air and are ideal for on-the-spot calibration. Simply open, insert the tester or electrode into the sachet and calibrate. Sachets are sold in boxes of 25 pieces.

Manufacturer: Wildlife Supply Company Brand: Wildlife Supply Company

This extremely portable instrument is essential for obtaining accurate pH measurements in the field. the housing is waterproof and dustproof to protect the electronics inside. Automatically compensates for temperature. Contains a self diagnostic feature. The easy-read display yields results in an instant. Waterproof, floating housing. Three-point push-button calibration with buffer recognition, non-volatile EEPROM memory, hold function and auto-off function. Pocket sized for portability. Resolution: 0.1 pH Accuracy: +/- 0.01 pH Range: -1.0 to 15.0