Measuring & Testing - Page 406

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-35425-00

The Oakton 35425-00 Oakton Multiparameter 35™-Series PCTestr 35 is a handheld, waterproof, and dustproof pocket meter that measures pH, conductivity, and temperature and floats, if dropped. A portable pocket meter is commonly used to measure the pH of substance in hydroponics, agriculture, industrial process checks, water treatment and swimming pools. This meter features ATC for accurate readings in fluctuating temperatures, and push-button calibration capabilities for a wide range of results. It has stainless steel, pin-type conductivity sensors for durability and compatibility with a wide variety of samples. The meter’s waterproof and dustproof housing has IP67-rating for protection against solid objects or liquids. The testr has a long-lasting sensor with Polyvinylidene Fluoride (PVDF)-protected reference junction with polymer gel for long lifespan. The meter has a large, upright, dual-line LCD screen for ease of viewing, a hold function which freezes readings for recording, and an auto shut-off to extend the life of the batteries. It has a click-lock battery cover for battery access to replace batteries without tools. The 35425-00 pocket meter has ATC from 0 to 50 degrees C (32 to 122 degrees F), or manual ability, and an operating temperature of 0 to 50 degrees C (32 to 122 degrees F). It has 1-point temperature, 3-point pH, 2-point conductivity calibration capability range. pH range is 0.0 to 14.0, resolution 0.1, accuracy + or - 0.1. Conductivity range 0 to 2000 μS; 2.00 to 20.00 mS, resolution of 10 μS; 0.1 mS, accuracy + or - 1% full-scale. Its dimensions are 1.25 (w) x 6.5 (h) inches (3.8 x 16.8 cm) and it weighs 3.25 ounces. The testr works with four 1.5-V alkaline batteries (not included) for up to 250 hours of continuous use (Eveready A76 or LR44 replacements). pH testers measure the acidity or alkalinity of a substance and are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agriculture, hydroponics, wine-making, and water-testing, and for scientific app...

Manufacturer: Gain Express Holdings Ltd. Brand: Gain Express Model: PHT-026

Multi-function water quality tester simultaneously measure water quality with six (6) different parameters including pH, °C, °F, EC, CF and TDS (PPM). Simultaneously analyze 6 water quality parameters with a single submersible probe system and has high pH accuracy up to ±0.1 pH. Measured values are quickly shown in large and clear Tri-LCD Display. Electrode & probe are pre-calibrated & fully temperature compensation. Features: Built-in Rechargeable Battery High pH accuracy up to ±0.1 pH Instantaneous reading results Option for mounting or hanging Specifications: Range **PH : 0.00~14.00PH **°C : -50°C~70°C **CF : 0.0~199CF **EC : 0.00~19.99EC **°F : -58°F~158°F **TDS : 10~19990ppm Resolution **PH : 0.01PH **°C : 0.1°C **TDS : 10ppm **EC : 0.01EC **°F : 0.2°F **CF : 0.1CF Accuracy **PH : ±0.1PH **°C : 1.0°C **EC, CF, TDS : ±2% F.S. Operating Temperature : 0 ~ 50°C Automatic Temperature Compensation (ATC) : 0 ~ 50°C Pre-Calibrated Electrode & Probe Built-in Battery Pack with AC Power Adaptor Size: 155 x 86 x 22mm Weight: approx. 223g Set Includes: 1 x Multi-function Water Quality Meter 1 x pH Electrode BNC Type (Enhanced Plastic Protection) 1 x TDS Electrode (Connected with main unit) 1 x Rechargeable Battery (installed) 1 set of pH 4.003 and pH 6.864 Calibration Solutions (FREE) 1 x AC Power Adaptor (US, UK, EU or AU) 1 x Mini-Screw Driver 1 x Silicon Case 1 x English User's Manual 1 x Metal Hanging Hook

Manufacturer: Supco Brand: Supco Model: PT100

Application: speedy recovery reclaim temperature measurement, measures evaporator plate and condensing temperatures, air inlet, outlet and surrounding air. 1 inputs. Temperature range: -40 - 199.9 degrees Fahrenheit. Temperature resolution: 0.1 degrees Fahrenheit, -40 - 199.9 degrees Fahrenheit, 1.0 degrees Fahrenheit. Temperature accuracy: 0.2 surface 1.0 air. Power: 9V alkaline. Weight: 7.2 oz. Measures 6-3/4" length by 51/64" width by 1-1/2" height; 1 year warranty.

Manufacturer: Bel-Art Brand: SP Scienceware Model: B60900-0700

The H-B Instrument Durac electronic thermometer is a dual-range digital thermometer with alarm and timer for measuring temperature in laboratories, food processing systems, refrigerators, and freezers. The thermometer measures temperature from -50 to 300 degrees C (-58 to 572 degrees F). The measurement accuracy is + or - 0.5 degrees C from -20 to 70 C, + or - 1 degree C from 70 to 150 C, + or - 2 degrees C from -20 to -50 degrees and from 150 to 200 degrees C, and + or - 3 degrees C from 200 to 300 degrees C. The 150mm/6 inch stainless steel probe is attached to the unit by a 1m/4.9 ft. stainless steel cable. The unit has a 99-hour countdown timer and a user-selectable high/low temperature alarm for monitoring temperature consistency. A data hold function allows the user to keep the temperature measurement on screen. This thermometer is traceable to National Institute of Standards and Technology, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This H-B Instrument thermometer is used by laboratory scientists and food-service and food-storage workers.SpecificationsPower supply(1) AAA batteryTemperature range-50 to 300 degrees C (58 to 572 degrees F)Accuracy+ or - 0.5 degrees C from -20 to 70 degrees C, + or - 1 degree C from 70 to 150 degrees C, + or - 2 degrees C from 150 to 200 C and -50 to -20 C, + or -3 degrees C 200 to 300 degrees CStandard metInternational Organization for Standardization (ISO) 17025Probe length150mm/6"Cable length1.5m/4.9ft.Dimensions, base unit (H x W)97 x 64mm/3.7 x 2.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and bec...

Manufacturer: Supco Brand: Supco Model: PT100C

Application: speedy recovery reclaim temperature measurement, measures evaporator plate and condensing temperatures, air inlet, outlet and surrounding air. 1 inputs. Temperature range: -40 - 93.28 degree Celsius. Temperature resolution: 0.1 degrees Fahrenheit, -40 - 199.9 degrees Fahrenheit, 1.0 degrees Fahrenheit. Temperature accuracy: 0.2 surface 1.0 air. Power: 9V alkaline. Weight: 7.2 oz. Measures 6-3/4" length by 51/64" width by 1-1/2" height; 1 year warranty.

Manufacturer: Magnum Media Brand: Magnum

This is a HIGH QUALITY unit made of Aluminum and not cheap plastic! BRAND NEW Magnum Media RHB-10ATC (0-10% Brix scale) Hand Held Refractometer in a foam-lined hard case. This model is handy for the testing of low sugar fruits and vegetables, Reamsian Bodily Fluids (per the Reams Biological Theory of Ionization), Maple Sap or for synthetic or semi-synthetic coolants. For machining and grinding coolants, please consult the Technical Data Sheet for appropriate concentration of fluid. This model is designed to give HIGHLY accurate readings with 0.10 Brix divisions (accuracy is +/- 0.10 Brix). This unit is TWICE as accurate as 0-32% models! All RHB models use ambient light, no battery or power source is required. Models with the "ATC" suffix are equipped with "Automatic Temperature Compensation" for accurate measurements without re-calibration after shifts in ambient working temperature (field use). Included are: a pipette for dropping test fluids onto the prism (never dip the refractometer into the test fluid!), a mini screwdriver for scale calibration, and a Users Guide.

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: DTK2 Color: Multicolored

The product is easy to use. The product is durable. True-RMS for accurate measurement in all applications.

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: DTK2 Color: Multicolored

The product is easy to use. The product is durable. True-RMS for accurate measurement in all applications.

Manufacturer: Duda Energy Brand: Duda Solar Model: csensor

p1000 Collector Sensor The pt1000 sensor is compatible with high temperature applications, typically for use in solar water collectors where temperatures may exceed 100°C. Duda Solar manifolds have a sensor port which this sensor easily slides into.

Manufacturer: Weanas Brand: Weanas Model: GM700 Color: Black Yellow

* The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit. Specification: * Measurement Range: Between -50 °C and 700 °C (Between -58 °F and 1292 °F ) * Accuracy: 0°C-700 °C(32°F-1292 °F): ± 1.5% or ±1.5°C(±2.7°F); -50°C-0 °C(-58 °F-32°F): ±3°C(±5°F) * Repeatability: ± 1% or ±1°C * Resolution: 0.1°C or 0.1°F * Response Time: 500mSec,95% response * Distance to Spot Size: 12:1 * Spectral Response: 8 - 14 um * Emissivity:0.10-1.00 Adjustable(0.95 Preset) * Storage Temperature: Between -20°C and 60°C (Between -4 °F and 140 °F ) * Operating Temperature: Between 0°C and 40°C (Between 32 °F and 104 °F ) * Operating Humidity: 10 - 95% RH non-condensing, up to 30°C (86°F ) * Power: 9V Alkaline or NiCd battery * Typical Alkaline battery life:Non-laser mode:22 hours;Laser model:12 hours * MAX/MIN/AVG/DIF reading * High/Low Temperature alarm setup * Data Store/Recall Function * Laser Target Pointer selection Note: This product is certified with CE, FCC and RoHS. Package Included: 1 x IR Thermometer 1 x User manual 1 x DC 9V battery 1 x Box