Measuring & Testing - Page 335

Manufacturer: MISCO Refractometer Brand: MISCO Refractometer Model: PA202X-003-105 Color: Blue

The DD-2 Digital-Dairy Refractometer will provide reliable estimates of the percent solids in waste milk and colostrum quality using the Brix Method, and a blood plasma protein concentration scale can be used to test for IgG levels. They are rugged enough to withstand the demands of farm use, yet precise enough to give laboratory-quality readings. Nonsalable waste milk has been fed to calves for many years and represents a source of nutrition that is readily available, has few other uses, and is cheaper to feed than whole milk. However, solids content and bacteria levels are two problems associated with waste milk feeding. The DD-2 Digital-Dairy refractometer cannot read solids content directly, that would require the milk solids scale available only on Model DD-1 and DD-3, however you can determine percent solids using the Brix scale and then converting the result into percent solids using equation available from producers of calf milk replacer. Once percent solids have been determined it is easy to adjust the waste milk to desired solids levels with calf milk replacer. A measure of blood plasma protein concentration can be used as an indication of passive transfer. There is a close correlation between total protein concentration and IgG levels in calves 24 hours of age. The blood plasma protein test requires a sample of blood plasma, not whole blood. Temperature compensation is automatic for fluids read between 10 and 40 °C (+50 to 104 °F). Scale 1 Fluid: Brix; Unit of Measure: Brix; Range: 0 to 85; Resolution: 0.1; Precision: +/-0.1 Scale 2 Fluid: Blood - Animal - Total Protein By Refractometer (TPr); Unit of Measure: g/dL; Range: 1 to 14; Resolution: 0.1; Precision: +/-0.1 INCLUDES: MISCO Palm Abbe Refractometer, Protective Rubber Armor Jacket, Instruction Manual An optional Rugged Case is available from our Amazon store.

Manufacturer: Thermco Brand: THERMCO

Proof Scale measures the percent Alcohol by Volume Multiplied by 2. Internal Revenue Specification Proof Scales. Suitable for Certification.

Manufacturer: Lightobject Brand: Lightobject Model: ETC-CB-K3MHT

The sale is a high temperature 3M(10ft) K type thermocouple with ceramic jacket for protection. It can protect the sensor to an extremly high heat condition for up to 1300'C (2370'F) Specification: Type: K senosr Range: 1300'C/2370'F Dimension: 100mm(L) x 16mm(dia.) Cable: 3m (10ft) wrapped by ceramic

Manufacturer: HBE Brand: HBE

Enviro-Safe® thermometers provide the highest degree of safety with a biodegradable column and green dye, which is safe for students and their environment. All thermometers have 6- to 7-mm outer diameters, and the bulbs have equal or smaller diameters than the stems. They are graduated in 1° C divisions. Lines and numbers are permanently fused to the glass. Total immersion, _10 to 225° C. 14'.

Manufacturer: Hydrofarm, Inc. Brand: Oakton Model: OK3542505

Two important measurements in one instrument. The PC Testr tests conductivity and pH while the PT Testr tests TDS and ph. They feature easy-to-read displays, push-button calibration, HOLD function and error messages. Valox housing and stainless steel electrodes offer good chemical compatibility and durability and are designed to float. All waterproof Testrs have replaceable sensors.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

In-line electrodes operate from 32 to 212°>F (0 to 100°>C) and have a chemical-resistant PVDF housing with a 1/2'' NPT(M) thread. Housing measures 4'' x 15/16'' diameter. Electrode extends 1'' beyond housing. Maximum pressure 100 psi. Measure pH from 0 to 13. Note: 100 Ω RTD ATC elements are platinum and conform to DIN curve 43760. ATC connector is miniature audio plug. Connector for the 1 kΩ RTD and the 3 kΩ Balco ATC elements is a spade lug. Connector for 100 kΩ thermistor ATC elements is a standard 1/4" phone plug. Integral, one-piece electrode and housing for installation convenience Choose from single-junction or double-junction designs Options of BNC or stripped and tinned ends

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98331

Replaceable 122 mm (4.5") penetration probe. Automatic temperature compensation. Lightweight and portable. The HI 98331 Soil Test is a pocket tester specifically designed to directly measure soil conductivity and temperature. With a temperature sensor in the penetration probe, measurements are automatically temperature compensated. The conductivity range can be calibrated at one point and is designed to be performed in a standardized solution. HI 98331 Soil Testis supplied with HI 73331 penetration conductivity probe, calibration screwdriver, batteries. Range: conductivity: 0.00 to 4.00 mS/cm (dS/m),Temperature Range : 0.0 to 50.0 degree C. Resolution: Conductivity: 0.01 mS/cm, Temperature: 0.1 degree C. Accuracy: Conductivity: +/-0.05 mS/cm (0.00 to 2.00 mS/cm),+/-0.30 mS/cm (2.00 to 4.00 mS/cm), Temperature: +/-1 degree C. Temperature Compensation: Automatic, Temperature coefficient (beta) fixed at the rate of 2 percent degree C. Calibration: Manual 1 point. Probe: HI 73331 122 mm (4.5") penetration. Battery type: 4 by 1.5V. Environment: 0 to 50 degree C. Measures 6-25/64" length by 1-19/32" width by 1" height. Weight: 3.5 oz.

Manufacturer: NEWGATE Brand: i-mesh-bean Color: Blue

iMeshbean® is a registered trademark and "Newgate-Ship from CA"is the only authorized seller of iMeshbean branded products. Features 1. Brand New in Box Ready to Be Operated Upon Arrival. 2. Six-in-one Meter: EC, CF, ℃, °F, TDS, pH 3. Easy Calibration of pH and TDS with just a Mini-screwdriver 4. Automatic Temperature Compensation (without this, pH reading will differ as the temperature varies) 5. Large, Triple Level Display 6. Caps on Both Sides for Storage and Protection of Electrodes 7. Suction Cups to Attach the Electrodes onto the Inwall of the Vessel, Tank or Reservoir etc. 8. Silicone Skin Case Could Protect the Meter from scratches 9. CE Certificated to Offer Safer and Precise Measurement Specification: Operating Temp: 0℃ ~ 50℃ (32°F ~ 122°F) Automatic Temp. Compensation: 0℃ ~ 50℃ (32°F ~ 122°F) Dimension: 6" x 3 3/8" x 7/8" (155 x 86 x 22mm) Weight: approx. 223g Package: 1 x Six-in-one Meter 2 x Probes 1 x AC-DC Adaptor 2 x Suction Cups 1 x Mini Screwdriver 1 x Silicone Skin Case

Manufacturer: GoerTek Brand: GoerTek Color: Silvery

GoerTek Handheld Sugar Refractometer Brix Content Tester for Beer, Wine, Honey and Strong Sugar WaterBrix Meter Measurement Widely used in the manufacture or production of sugar, food, fruit, beverages etc. With a higher measuring range, this refractometer can be used to measure high sugar objects, such as honey, strong sugar water etc. Versatile refractometer, with a brix scale of 0~90%, perfect for sugar measurement, contribute much for the management of product quality, delivery inspection, sweetness classification and so on. Easy to Use Please place 2~3 drops of sample on the main prism, close the daylight plate and look through the eyepiece for brix reading. Specification Function: Sugar content measurement (Only) Brix scale: 0 ~ 90% Automatic Temperature Compensation: 10℃~30℃ Accuracy: ±0.2% Main material: Auluminum Package 1*Refractometer 1*Mini-screwdriver 1*Pipette 1*Wiping cloth 1*English Instruction manual 1*Plastic Case Please Note: 1. Don't expose the instrument to damp working conditions or immerse the instrument in water. If the instrument becomes foggy, water has entered the body. 2. Don't measure abrasive or corrosive chemicals with this instrument. They can damage the prism's coating. 3. Clean the instrument between each measurement using a soft, damp cloth. Failure to clean the prism on a regular basis will lead to inaccurate results and damage to the prism's coating. 4. This is an optical instrument, it requires careful handling and storage. Failure to do so can result in damage to the optical components and its basic structure.

Manufacturer: FIXKIT Brand: FIXKIT

Features Precise Non-contact Measurements. Compact Infrared Thermometer Provides Fast, Easy and Accurate Readings. Widely Used to be Measure the Temperature in Industry. Unique Flat Surface, Mini Modern Housing Design. Simple One-handed Operation. Laser Targeting; LCD with Back Light. C or F Select Switch; Laser ON/OFF Switch. Automatic Power off; Display Hold Function; Max, Min Function. MAX, MIN or Normal Mode  Normal Mode: When the trigger is depressed, the device will provide a continuous temperature readout. Max and min mode: The device scans all the temperatures that are read and displays the highest or lowest recorded temperature that was detected.  Note Temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct. Specifications Model: TL-T2 Temperature: -50℃ to +650℃ / -58℉ to +1202℉ Temperature Resolution: 0.1℃ / 0.1℉ Accuracy ±2% Emissivity: Fixed at 0.95 Response time: < 1 Second Power Supply: 9V Battery Optical Resolution: 12:1 Distance to Spot Size Ratio Package Contents 1 x FIXKIT INFRARED THERMOMETER (Temperature Range: -50 °C to 450 °C) 1 x 9V Battery 1 x User Manual 1 x Black Bag 1 x Warranty Card