Co2 Manifold: 4 Outlet

A Co2 Manifold Or Distributor Allows You To Have One Co2 Tank With Multiple Kegs. This Particular Manifold Gives You The Ability To Have Four Kegs On One Co2 Tank. A Manifold Can Act As A Gas Line Splitter With Both Home Brew Draft Systems And Commercial Kegerators. A Single Beer Line Can Be Turned Off Individually Without Interrupting The Flow To Other Kegs. These Individual Shut-Offs Give You The Ability To Swap-Out Or Fix Kegs Without Depressurizing Your Entire Kegging System. Each Beer Line Also Has A Check Valve That Stops The Beer From Flowing Backwards. This Eliminates The Chance Of Beer Accidentally Flowing From One Keg To Other. Check Valves Also Keep Beer From Contaminating Your Gas Lines And From Backing Up Into Your Co2 Regulator. All The Gas Lines Attach To This Co2 Manifold By Sliding Them Onto The 3/8" Barbed Stems. Then Clamping Them Down. A 3/8" Barb Makes A Nice Tight Fit For Standard 5/16" I.D. Gas Line. Keep Your Draft System Nice And Tidy. The Co2 Manifold Has Screw Holes So It Can Be Mounted To A Wall If You'D Like. You Can Also Connect More Than One Of These Co2 Manifold Systems Together By Replacing The End Cap With A Pip Union. As Your Drafts System Grows, Your Manifold System Can Grow Along With It. The Co2 Manifold, Itself, Is Made Of Extruded Aluminum. The Ball-Valve Shut-Offs And Check Valve Are Made Of Chrome-Plated Solid Brass. The Levers Are Rubberized. The Manifold Inlet And End Cap Are Made Solid Brass. Dimensions: 9-7/8" Long, 3-3/8" Tall And 1-3/4" Deep. Special Note: A Co2 Manifold Cannot Deliver More Than One Pressure At A Time. This Is Because The Manifold Is Working Off The Same Co2 Regulator. If You Need More Than One Dispensing Pressure, This Can Be Accomplished With Our Triple Gauge Regulator (Item: Df-Rg330).